1. Úvod
This instruction manual provides essential information for the proper installation, usage, and replacement of FERM Vacuum Cleaner Bags designed specifically for the FERM VCM1003 vacuum cleaner. Please read these instructions carefully before use to ensure optimal performance and longevity of your vacuum cleaner.
2. Konec produktuview
The FERM Vacuum Cleaner Bags are high-quality paper bags intended for collecting dust and debris within the FERM VCM1003 vacuum cleaner. Each package contains 5 replacement bags, ensuring a continuous supply for your cleaning needs.
Image 1: A single FERM VCM1003 vacuum cleaner bag, made of brown paper with a central cardboard connector and rubber seal.
3. Specifikace
The following specifications apply to the FERM Vacuum Cleaner Bags:
- Množství: 5 kusy v sadě
- Materiál: Papír
- Rozměry tašky: Přibližně 450 x 200 mm
- Boring Diameter: 46.5 mm
- Rubber Seal Diameter: 33 mm
- Cardboard Connector Dimensions: 84 x 84 mm
- Compatible Vacuum Cleaner: FERM VCM1003
4. Instalace
Follow these steps to install a new vacuum cleaner bag into your FERM VCM1003:
- Vypnout: Ensure the vacuum cleaner is unplugged from the power outlet before proceeding.
- Open Vacuum: Release the latches or clips on your FERM VCM1003 to open the vacuum cleaner housing and access the dust compartment.
- Odstraňte starý sáček (pokud je k dispozici): Carefully remove the full or old vacuum bag. Dispose of it according to local waste disposal regulations.
- Vložit novou tašku: Take a new FERM vacuum cleaner bag. Align the cardboard connector of the new bag with the inlet nozzle inside the vacuum cleaner's dust compartment. Push the cardboard connector firmly onto the nozzle until it is securely seated. Ensure the rubber seal creates a tight fit around the nozzle to prevent dust leakage.
- Taška na pozice: Gently unfold the bag inside the compartment, ensuring it does not obstruct any internal components or the closing mechanism.
- Zavřít Vakuum: Close the vacuum cleaner housing securely, ensuring all latches or clips are fastened.
- Připraven k použití: The vacuum cleaner is now ready for operation with the new bag installed.
5. Používání
Once installed, the vacuum cleaner bag functions automatically during vacuum operation. It collects dust, dirt, and debris, preventing them from entering the motor and ensuring clean exhaust air. Regularly check the bag's fill level to maintain optimal suction power.
6. Údržba a výměna
For consistent cleaning performance, it is crucial to replace the vacuum cleaner bag regularly. The frequency of replacement depends on the amount and type of debris collected.
- Kdy vyměnit: Replace the bag when it is approximately two-thirds full, or when you notice a significant decrease in suction power, even if the bag does not appear completely full. Overfilling the bag can strain the vacuum motor and reduce efficiency.
- Postup výměny: Follow the steps outlined in the "Installation" section (Section 4) to safely remove the old bag and install a new one.
- Likvidace: Always dispose of used vacuum bags in a sealed manner to prevent dust and allergens from re-entering the environment.
7. Řešení problémů
If you experience issues related to the vacuum cleaner bag, consider the following:
- Snížené sání: Check if the bag is full and requires replacement. Also, ensure the bag is correctly installed and the cardboard connector forms a tight seal with the vacuum's inlet nozzle.
- Únik prachu: Verify that the bag is properly seated and sealed. Ensure the vacuum cleaner housing is closed tightly.
- Taška nepasuje: Confirm that you are using genuine FERM VCM1003 compatible bags. Refer to the specifications in Section 3.
8. Záruka a podpora
For questions regarding the FERM Vacuum Cleaner Bags or for technical support, please contact your retailer or the FERM customer service department. Keep your purchase receipt as proof of purchase.
