1. Úvod a konecview
The Saramonic SmartMic+OP is a compact, omnidirectional microphone designed to enhance the audio quality of videos recorded with the DJI Osmo Pocket or Pocket 2. This microphone connects directly to the USB-C port of your device, offering a significant improvement over the built-in microphone.
Mezi klíčové vlastnosti patří:
- Broadcast-Quality Audio: Delivers clear and detailed sound for professional-sounding videos.
- 3.5mm sluchátkový výstup: Allows for real-time audio monitoring during recording.
- Ultra přenosný design: Lightweight and durable metal construction, requiring no batteries or charging.
- Vzor všesměrového vyzvednutí: Captures sound from all directions, suitable for various recording environments and subject positioning (outward or selfie mode).
- Included Wind Protection: Comes with both a foam windscreen for indoor use and a furry wind protector for outdoor recording.

Image 1.1: The Saramonic SmartMic+OP microphone, showcasing its compact design and USB-C connector.
2. Co je v krabici
Upon unboxing your Saramonic SmartMic+OP, please ensure all the following components are present:
- 1 x SmartMic+OP Omnidirectional Microphone
- 1 x pěnové čelní sklo
- 1 x Furry High-Wind Windscreen
- 1 x Záruční list

Image 2.1: Contents of the Saramonic SmartMic+OP package, including the microphone, foam windscreen, and furry windscreen.
3. Pokyny k nastavení
Follow these steps to set up your SmartMic+OP with your DJI Osmo Pocket:
- Připojte mikrofon: Locate the USB-C port on your DJI Osmo Pocket. Carefully insert the USB-C connector of the SmartMic+OP into this port until it is securely seated. The microphone is designed for plug-and-play operation and does not require external power.
- Attach Windscreen (Optional):
- For indoor use or minimal wind, slide the pěnové čelní sklo over the microphone capsule.
- For outdoor use or windy conditions, slide the furry high-wind windscreen over the microphone capsule for maximum wind noise reduction.
- Monitorovací zvuk (volitelné): If you wish to monitor your audio in real-time, connect a pair of headphones to the 3.5mm headphone output jack located on the side of the SmartMic+OP.

Image 3.1: The SmartMic+OP securely connected to the DJI Osmo Pocket, ready for use.

Image 3.2: The SmartMic+OP with the foam windscreen attached, mounted on the DJI Osmo Pocket.
4. Návod k obsluze
The SmartMic+OP is designed for straightforward operation with your DJI Osmo Pocket:
- Automatická detekce: Once connected, your DJI Osmo Pocket should automatically detect the external microphone. No additional settings are typically required on the Osmo Pocket for basic audio capture.
- Microphone Orientation: The omnidirectional pickup pattern captures sound from all directions. You can orient the microphone to face outward, capturing ambient sounds, or rotate the Osmo Pocket to face the microphone forward in selfie mode, focusing on your voice.
- Monitorování zvuku: If headphones are connected to the 3.5mm jack, you will hear the audio being recorded in real-time. This allows you to verify audio levels and quality during your recording session.
- Záznam: Begin recording on your DJI Osmo Pocket as you normally would. The audio will now be captured by the SmartMic+OP.

Image 4.1: The SmartMic+OP attached to the DJI Osmo Pocket, demonstrating its compact profile během provozu.
5. Údržba
Proper care and maintenance will ensure the longevity and optimal performance of your SmartMic+OP microphone:
- Čištění:
- Wipe the microphone body with a soft, dry cloth. Do not use liquid cleaners or solvents.
- The foam and furry windscreens can be gently hand-washed with mild soap and water, then air-dried completely before re-use.
- Skladování: Store the microphone and its accessories in a clean, dry place, away from extreme temperatures and humidity. Use the original packaging or a protective pouch to prevent dust and physical damage.
- Zacházení: Zabraňte pádu mikrofonu nebo jeho vystavování silným nárazům, mohlo by dojít k poškození vnitřních součástí.
6. Řešení problémů
If you encounter issues with your SmartMic+OP, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No audio recorded from microphone. | Mikrofon není plně připojen. DJI Osmo Pocket settings. | Ensure the USB-C connector is fully inserted into the Osmo Pocket. Check your DJI Osmo Pocket's audio input settings to confirm it's set to external microphone. |
| Poor audio quality / Excessive background noise. | Incorrect windscreen used. Hluk z prostředí. Mikrofon je příliš daleko od zdroje zvuku. | Use the furry windscreen for outdoor/windy conditions. Pokud je to možné, nahrávejte v tišším prostředí. Position the Osmo Pocket closer to the desired sound source. |
| No sound through headphones. | Headphones not fully connected. Vadná sluchátka. | Ujistěte se, že jsou sluchátka zcela zasunuta do 3.5mm jacku. Test with another pair of headphones to rule out a headphone issue. |
7. Specifikace
| Název modelu | SmartMic+OP |
| Tvarový faktor mikrofonu | Mini |
| Polární vzor | Všesměrový |
| Typ konektoru | USB Type-C |
| Kompatibilní zařízení | DJI Osmo Pocket, DJI Pocket 2 (Camera) |
| Frekvenční odezva | 50 Hz (Note: Full range not specified, 50 Hz is the lower end provided) |
| Odstup signálu od šumu | 78 dB |
| Audio Citlivost | 12 decibelů |
| Rozměry položky (D x Š x V) | 2.8 x 1 x 1.91 palce |
| Hmotnost položky | 1.44 unce (0.09 libry) |
| Materiál | Metal (Microphone body), Foam (Windscreen) |
| Barva | Černý |
| Zdroj napájení | Device Powered (No Battery Required) |
8. Záruka a podpora
The Saramonic SmartMic+OP comes with a warranty. Please refer to the included warranty card for specific terms and conditions, including warranty duration and coverage details.
For technical support, product inquiries, or warranty claims, please visit the official Saramonic webnebo kontaktujte jejich oddělení zákaznických služeb. Další informace a zdroje podpory naleznete na Saramonic Brand Store on Amazon.