1. Úvod
The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.
Klíčové vlastnosti:
- Smart ECO2S+ Energy-Saving Design
- 2-Stage Vytápění: Automaticky využívá nejnižší spotřebutage needed for heating.
- Includes ECO2S+ Remote Temperature Sensor for precise temperature monitoring.
- Built-In Provision for Optional 24V Remote Thermostat, compatible with NEST and other 24V Wi-Fi thermostats.
- Integrated fan-only and timer modes.
- Spiral steel elements and high CFM for even air distribution and prolonged heater life.
- Universal wall/ceiling bracket for simple installation.
2. Důležité bezpečnostní informace
Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with all applicable local, state, and national electrical codes. Ensure the power supply is disconnected before any service or installation.
- Montáž: Securely mount the heater using the provided universal bracket to a structural support capable of holding the unit's weight. Maintain proper clearances from combustible materials as specified in the installation section.
- Operace: Do not operate the heater with the grill removed. Do not block air inlets or outlets. Keep flammable materials away from the heater.
- Údržba: Před čištěním nebo prováděním jakékoli údržby odpojte napájení.
3. Obsah balení
Po otevření balíku ověřte, zda jsou všechny položky přítomny a nepoškozené:
- KING KB ECO2S+ Unit Heater (5KW / 240V)
- Universal Wall/Ceiling Mounting Bracket
- Dálkové ovládání
- ECO2S+ Remote Temperature Sensor
- Heavy-Duty Pigtail (for electrical connection)
- Installation Hardware (lag bolts, nuts, grommet)
- Uživatelská příručka
This image displays the main heater unit, a black remote control, a white remote temperature sensor, and a grey universal mounting bracket, all included in the product package.
4. Instalace
4.1 Montáž ohřívače
The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.
- Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
- Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
- Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.
This image shows the back of the grey heater unit with a protective grill covering the fan. Mounting holes are visible on the sides for attaching the universal bracket.
4.2 Elektrické zapojení
This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.
- Odpojit napájení: Před zahájením jakékoli elektroinstalace vypněte napájení hlavním jističem.
- Přístupový prostor pro kabeláž: Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
- Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
- Install Strain Relief: Insert the provided grommet with integral strain relief into the knockout hole.
- Připojit dráty:
- Connect the black wire to the L1 terminal.
- Connect the red wire to the L2 terminal.
- Connect the green (ground) wire to the grounding screw.
- Bezpečné zapojení: Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
- Zavřít přihrádku: Reattach the access panel with the Phillips screw.
- Obnovit napájení: Zapněte napájení hlavním jističem.
This image shows the internal wiring compartment of the heater with various colored wires connected to terminals (L1, L2, and ground) and a circuit board. A label indicates "Red Wire L2" and "Black Wire L1" for 240V, 4-8AWG connections.
Video 1: This video demonstrates the electrical wiring process for the KING KB ECO2S+ heater, showing how to connect the power cable to the internal terminals and secure it with a strain relief. It also highlights the 2-stage heating feature and remote temperature sensing.
4.3 External Thermostat Switch
On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.
5. Návod k obsluze
5.1 Počáteční zapnutí
Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltage a napájení.
5.2 Ovládací panel a dálkové ovládání
The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.
This image shows the front of the grey heater unit with horizontal louvers and a digital control panel at the bottom. The control panel has buttons for Power, Mode, Start/Stop, and Up/Down arrows, along with a digital temperature display.
5.3 Provozní režimy
Stisknutím tlačítka „Režim“ můžete procházet dostupné provozní režimy:
- Nízká teplota: Poskytuje nižší tepelný výkon.
- Eko režim: Automatically adjusts wattage to the lowest level needed to maintain the set temperature, optimizing energy efficiency.
- Pouze ventilátor: Circulates air without heating, useful for summer or general ventilation.
- Vysoká teplota: Poskytuje maximální tepelný výkon.
5.4 Nastavení teploty
Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.
5.5 Funkce časovače
The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.
6. Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho ohřívače. Před prováděním jakékoli údržby vždy odpojte napájení.
- Čištění: Pravidelně čistěte vnější povrch ohřívače měkkým hadříkemamp cloth. Ensure the air inlets and outlets are free from dust and debris. Do not use abrasive cleaners or solvents.
- Inspekce: Annually inspect electrical connections for tightness and signs of wear. Check the mounting bracket for security.
- Ventilátor: Ensure the fan operates smoothly and is free from obstructions.
7. Řešení problémů
If your heater is not functioning correctly, refer to the following common issues and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Heater does not turn on / No display. | No power to the unit or incorrect voltage. | Check circuit breaker. Ensure 240V power is supplied. Verify wiring connections are secure. |
| Topení je zapnuté, ale neprodukuje teplo. | Thermostat switch set to external, or external thermostat not calling for heat. | Ensure the external thermostat switch on the back of the unit is set to 'I' for internal thermostat control. If using an external thermostat, check its settings. |
| Nedostatečné vytápění. | Incorrect mode selected, or obstructions. | Select 'High Heat' mode. Ensure air inlets/outlets are clear. Check louvers are directed appropriately. |
| Dálkové ovládání nefunguje. | Vybité baterie nebo překážka. | Replace remote control batteries. Ensure no obstructions between remote and heater. |
8. Specifikace
- Značka: KRÁL
- Model: KB2405-1-ECO2S-PLUS
- Výkon: 5 kW
- svtage: 240V
- Amperage: 20.8 Amps
- Počet rychlostí: 2 (nízká, vysoká)
- Typ paliva: Elektrický
- Speciální vlastnosti: Energy Efficient, Remote Control, Remote Temperature Sensor, 2-Stage Topení
- Barva: Černý
- Form Factor: Skříň
- Vnitřní/venkovní použití: Krytý
- Typ montáže: Wall Mount (Universal bracket included)
- Rozměry produktu: 16.5 x 15 x 13.5 palce
- Hmotnost položky: 40 libry
- UPC: 093319332399
- První k dispozici: 29. září 2020
This chart provides guidance on selecting the appropriate heater wattage based on garage size (1-car to 4-car garages), square footage, BTU, CFM, and amperage. The 5KW model is suitable for 1-car garages up to 450 sq. ft.
9. Záruka a podpora
For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.
- Vrácení: This product typically offers a 30-day easy return policy.
- Plány ochrany: Optional 4-Year Protection Plans and Complete Protect monthly plans may be available for extended coverage.
- Zákaznická podpora: For technical assistance or service inquiries, please visit the KING store on Amazon or refer to the contact information provided in your product packaging.
Visit the official KING Store for more information: KING Store