1. Úvod
The Fender Tone Master Twin Reverb Guitar Amplifier is a state-of-the-art digital amplifier designed to faithfully replicate the classic tone and feel of a '60s-era all-tube Twin Reverb. This model, finished in a distinctive Blonde vinyl with an Oxblood grille, features ultralight Celestion neodymium-magnet speakers, offering significant weight savings without compromising on authentic Fender sound. It is equipped with a 5-way power attenuator for versatile wattage reduction, making it suitable for various playing environments from studio to stage.

Obrázek 1.1: Přední strana view of the Fender Tone Master Twin Reverb Guitar Amplifier in Blonde finish. The amplifier features a light blonde textured vinyl covering, a dark brown grille cloth, and chrome hardware. The control panel at the top includes various knobs and switches for sound adjustment, and the Fender logo is prominently displayed on the grille.
2. Nastavení
2.1 Vybalení a kontrola
- Opatrně vyjměte ampvyjměte z obalu.
- Zkontrolujte amplifier for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer immediately.
- Uschovejte si originální obalové materiály pro budoucí přepravu nebo skladování.
2.2 Umístění
Umístěte ampUmístěte zařízení na stabilní a rovný povrch. Zajistěte dostatečné větrání kolem zařízení, abyste zabránili jeho přehřátí. Neumisťujte jej ampUchovávejte v blízkosti zdrojů tepla nebo na přímém slunečním světle.
2.3 Připojení napájení
- Zajistěte ampVypínač záchranáře je v poloze VYPNUTO pozice.
- Připojte dodaný napájecí kabel k amplifier's IEC power inlet on the rear panel.
- Zapojte druhý konec napájecího kabelu do uzemněné elektrické zásuvky se správným napětím.tage for your region. Refer to the amplifier's rear panel for voltage požadavky.
2.4 Připojení přístroje
Připojte kytaru nebo jiný nástroj k VSTUP 1 or VSTUP 2 jack on the front panel using a standard 1/4-inch instrument cable. The Tone Master Twin Reverb features two channels: Normal and Vibrato.
3. Provoz
3.1 Zapnutí/vypnutí
- To power on, flip the MOC přepnout na ON position. The pilot light will illuminate.
- Chcete-li vypnout, otočte MOC přepnout na VYPNUTO pozice.
3.2 Ovládací prvky na předním panelu
The front panel provides access to all primary sound shaping controls. The amplifier features two independent channels: Normal and Vibrato.
Normal Channel Controls:
- VSTUP 1 a 2: 1/4-inch input jacks for connecting your instrument. Input 1 has higher sensitivity.
- BRIGHT Switch: Engages a bright tone circuit for added high-end sparkle.
- HLASITOST: Ovládá celkovou výstupní úroveň normálního kanálu.
- ZTROJNÁSOBIT: Upravuje vysokofrekvenční odezvu.
- STŘEDNÍ: Upravuje frekvenční odezvu středního rozsahu.
- BAS: Upravuje nízkofrekvenční odezvu.
Vibrato Channel Controls:
- VSTUP 1 a 2: 1/4-inch input jacks for connecting your instrument. Input 1 has higher sensitivity.
- BRIGHT Switch: Engages a bright tone circuit for added high-end sparkle.
- HLASITOST: Controls the overall output level of the Vibrato channel.
- ZTROJNÁSOBIT: Upravuje vysokofrekvenční odezvu.
- STŘEDNÍ: Upravuje frekvenční odezvu středního rozsahu.
- BAS: Upravuje nízkofrekvenční odezvu.
- REVERB: Controls the intensity of the built-in spring reverb effect.
- RYCHLOST: Adjusts the rate of the vibrato effect.
- INTENZITA: Adjusts the depth of the vibrato effect.
3.3 Vlastnosti zadního panelu
- POWER ATTENUATOR: A 5-way switch that allows you to reduce the ampVýstupní hodnota lifierutage for lower volume playing while maintaining tone. Settings typically include full power, and attenuated levels like 50W, 22W, 12W, 5W, and 1W.
- XLR LINE OUT: Balanced XLR output for connecting to a mixing console or recording interface. Includes options for cabinet simulation.
- USB port: For firmware updates and potential future functionality.
- Jack nožního spínače: For connecting an optional footswitch to control Reverb and Vibrato effects.
4. Údržba
4.1 Čištění
K čištění amppoužijte měkký, suchý hadřík. Na odolnou špínu použijte lehceamp cloth can be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2 Skladování
Pokud se přístroj delší dobu nepoužívá, uložte jej amplifier in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to cover the ampochranou před prachem.
4.3 Péče o reproduktory
The Celestion Neo G12 Creamback speakers are designed for durability. Avoid poking or pressing on the speaker cones, as this can cause damage. If the grille cloth becomes dirty, gently brush it with a soft brush or use a vacuum cleaner with a brush attachment.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk | Power not connected; Volume knob set to zero; Instrument cable faulty; Speaker cable disconnected (if applicable). | Check power connection and outlet; Increase volume; Test with a different instrument cable; Ensure speaker connections are secure. |
| Zkreslený zvuk | Vstupní signál je příliš vysoký; Amplifier volume too high; Faulty instrument or cable. | Reduce instrument output or amplifier input gain; Lower amplifier volume; Test with a different instrument/cable. |
| Hukot nebo hluk | Ground loop; Faulty cable; Interference from other electronic devices. | Try a different power outlet; Use shielded cables; Move ampUchovávejte vysavač mimo dosah jiné elektroniky. |
| Effects (Reverb/Vibrato) not working | Effect level set to zero; Footswitch not connected or faulty. | Increase Reverb/Intensity/Speed knobs; Check footswitch connection and functionality. |
If the problem persists after attempting these solutions, please contact Fender customer support or an authorized service center.
6. Specifikace
- Název modelu: Tone Master Twin Reverb Guitar Amplifier, Blonde
- Číslo modelu: 2274200982
- Série: Tone Master
- Amplifier Typ: Digitální
- Výstupní Wattage: 200 Watts (simulated 85W tube amp power) with 5-way attenuator
- Řečníci: 2 x 12" Celestion Neo G12 Creamback
- kanály: Two (Normal and Vibrato)
- Efekty: Reverb, Vibrato
- Materiál skříně: Lightweight Solid Pine
- Krytina: Blonde Textured Vinyl
- Tkanina na mřížku: Oxblood
- Rozměry produktu: 2 x 12 x 200 palce
- Hmotnost: 33 libry (14.97 kg)
- Konektivita: 1/4" Instrument Inputs, XLR Line Out with Impulse Response (IR) cabinet simulations, USB port for firmware updates, Footswitch jack.
7. Záruka a podpora
7.1 Informace o záruce
Fender products are covered by a limited warranty. For detailed information regarding the warranty period and coverage for your Tone Master Twin Reverb amplifier, please refer to the warranty card included with your product or visit the official Fender webUschovejte si doklad o koupi pro případ reklamace.
7.2 Zákaznická podpora
For technical assistance, service, or parts, please contact Fender customer support. You can find contact information and frequently asked questions on the official Fender webmísto:
Additionally, a PDF user manual is available for download:





