Zavedení
This manual provides instructions for the Plustek OpticFilm Series Adapter (Model: OF adapter). This adapter is designed to provide power to compatible Plustek OpticFilm series scanners, including models 8100, 8200i, 7400, 7500, and 7600. Please read this manual thoroughly before use to ensure proper setup and operation.
Nastavení
Vybalování
Carefully remove the adapter and any included cables from the packaging. Verify that all components are present.
Připojení adaptéru
- Locate the power input port on your Plustek OpticFilm series scanner.
- Connect the proprietary connector of the Plustek OpticFilm Series Adapter to the scanner's power input port.
- Connect the power cord (if separate) to the adapter, then plug the power cord into a standard electrical outlet (100-240V AC, 50-60Hz).
- Ensure all connections are secure before powering on your scanner.
Operace
Once the adapter is correctly connected to your scanner and a power source, the scanner should receive power. The adapter functions automatically to provide the necessary power. Refer to your specific Plustek OpticFilm scanner's manual for instructions on powering on and operating the scanner itself.
Údržba
Obecná péče
- Udržujte adaptér čistý a bez prachu. K čištění používejte měkký, suchý hadřík.
- Avoid exposing the adapter to moisture, liquids, or extreme temperatures.
- Nepokoušejte se adaptér otevírat ani opravovat. Veškerý servis svěřte kvalifikovanému personálu.
- Během používání zajistěte dostatečné větrání kolem adaptéru, aby nedošlo k jeho přehřátí.
Odstraňování problémů
Scanner Not Powering On
- Zkontrolujte připojení napájení: Ensure the adapter is securely plugged into both the scanner and a functional electrical outlet.
- Verify Outlet Functionality: Otestujte elektrickou zásuvku pomocí jiného zařízení, abyste se ujistili, že dodává napájení.
- Zkontrolujte kabely: Check the power cables for any visible damage or frayed wires. Replace if necessary.
- Potvrzení kompatibility: Ensure this adapter is the correct power supply for your specific Plustek OpticFilm scanner model.
Přehřátí adaptéru
- Zajistěte ventilaci: Make sure the adapter is not covered and has adequate airflow around it.
- Disconnect if Hot: If the adapter feels excessively hot, disconnect it immediately from the power source and scanner. Allow it to cool down before reconnecting. If overheating persists, discontinue use and contact support.
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | OF adapter |
| Vstupní objemtage | 100-240V AC |
| Vstupní frekvence | 50-60 Hz |
| Výstupní objemtage | 15.0V DC |
| Výstupní proud | 1.2 Amps |
| Wattage | 18 wattů |
| Typ konektoru | Proprietární |
| Zahrnuté komponenty | 2 x USB kabel (Note: USB cables are typically for data transfer, not power for this adapter) |
| Rozměry balení | 4.17 x 3.23 x 2.4 palce |
| Hmotnost položky | 6.4 unce |
Informace o záruce
For detailed warranty information regarding your Plustek OpticFilm Series Adapter, please refer to the warranty card included with your product or visit the official Plustek website. Warranty terms and conditions may vary by region and are subject to change. Please retain your proof of purchase for warranty claims.
Zákaznická podpora
Should you require technical assistance or have questions about your Plustek OpticFilm Series Adapter, Plustek offers comprehensive customer support to ensure you get the most out of your product.
Available Support Channels:
- Online podpora Zendesku v reálném čase: Access live chat support for immediate assistance with common issues or inquiries.
- Telefonická podpora expertů z USA: Contact our U.S.-based technical support team via phone for direct assistance.
- Podpora online formulářů/e-mailů: Submit your inquiries through our website's contact forms or via email for detailed responses.
- Podpora konzultantů: For specialized solution inquiries and Software Development Kit (SDK) support, dedicated consultant support is available.
Nejnovější kontaktní informace a zdroje podpory naleznete na oficiálních stránkách společnosti Plustek. webmísto.