GHB Wireless Baby Monitor with 2.4-inch LCD User Manual

1. Úvod

This manual provides essential information for the safe and effective operation of your GHB Wireless Baby Monitor. Please read this manual thoroughly before using the product and retain it for future reference. The GHB Baby Monitor is designed to provide a secure and private connection to monitor your baby, offering features such as two-way audio, night vision, and temperature monitoring.

2. Bezpečnostní informace

• Nebezpečí uškrcení: Keep all cables out of reach of children (at least 1 meter / 3 feet away). Never place the camera or cords within reach of the baby's crib or playpen.
• Nebezpečí udušení: This product contains small parts. Keep them away from children.
• Vystavení teplu: Do not place the monitor or camera near heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
• Voda a vlhkost: Nevystavujte výrobek vodě ani vlhkosti. Nepoužívejte v blízkosti van, umyvadel, prádelen, bazénů nebo vlhkých sklepů.
• Zdroje energie: Use only the AC power adapters provided with the product. Using other adapters may damage the device and void the warranty.
• Větrání: Do not block any ventilation openings. Ensure proper airflow around the units.
• Bezpečnost baterie: The parent unit contains a rechargeable Lithium-ion battery. Do not attempt to replace it yourself. Dispose of batteries according to local regulations.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Parent Unit (Monitor with 2.4-inch LCD)
• 1 x dětská jednotka (kamera)
• 2 x Power Adapters (for Parent Unit and Baby Unit)
• 1 x Uživatelská příručka

Obrázek 3.1: Obsah balení

4. Konec produktuview

The GHB Baby Monitor system consists of a Parent Unit (monitor) and a Baby Unit (camera). Familiarize yourself with their components and controls.

4.1 Rodičovská jednotka (monitor)

The parent unit features a 2.4-inch LCD screen for video display and buttons for control.

• LCD obrazovka: Zobrazuje živý videozáznam z kamery.
• Vypínač: Stiskněte a podržte pro zapnutí/vypnutí.
• Tlačítko Menu/OK: Přístup k možnostem nabídky, potvrzení výběru.
• Navigační tlačítka (nahoru/dolů/vlevo/vpravo): Navigate through menus, adjust volume/brightness.
• Tlačítko Talk: Stisknutím a podržením můžete mluvit na své dítě.
• Tlačítko ukolébavky: Play/pause lullabies.
• ECO Mode Indicator: Shows when ECO mode is active.
• Indikátor baterie: Zobrazuje aktuální stav baterie.

4.2 Dětská jednotka (kamera)

The baby unit captures video and audio from your baby's room.

• Objektiv fotoaparátu: Zachytí video.
• Infračervené LED diody: Zajistěte noční vidění.
• Mikrofon: Picks up audio from the baby's room.
• Reproduktor: For two-way talk and lullabies.
• Teplotní senzor: Sleduje pokojovou teplotu.
• Napájecí port: Připojuje se k napájecímu adaptéru.
• Montážní otvor: Pro montáž na stěnu.

Figure 4.1: Parent Unit and Baby Unit

Figure 4.2: Product Dimensions and Stand

5. Nastavení

5.1 Nabíjení rodičovské jednotky

1. Connect the small end of one power adapter to the Parent Unit's power port.
2. Zapojte druhý konec do elektrické zásuvky.
3. The battery indicator on the screen will show charging status. Charge for approximately 4 hours before first use.

5.2 Umístění dětské jednotky (kamery)

1. Place the Baby Unit on a flat surface in your baby's room, such as a dresser or shelf. Ensure it is at least 1 meter (3 feet) away from the crib to prevent strangulation hazards from the power cord.
2. Adjust the camera angle manually to get a clear view of your baby. The camera base allows for 360-degree rotation.
3. Alternatively, the camera can be wall-mounted using the provided mounting hole.
4. Connect the second power adapter to the Baby Unit's power port and plug it into a power outlet.

5.3 Zapnutí

1. Stiskněte a podržte tlačítko napájení na rodičovské jednotce, dokud se obrazovka nezapne.
2. Ensure the Baby Unit is plugged in and powered on. The Parent Unit should automatically connect to the Baby Unit.
3. If the connection is not established, refer to the Troubleshooting section for pairing instructions.

6. Návod k obsluze

6.1 Nastavení hlasitosti a jasu

• Use the Up/Down navigation buttons on the Parent Unit to adjust the volume of the audio from the Baby Unit.
• Otevřete nabídku pro nastavení jasu obrazovky pro optimální viewIng.

6.2 ECO Mode (VOX)

ECO mode conserves battery power by turning off the screen and audio when no sound is detected from the baby's room. The monitor will automatically activate when sound is detected.

1. Press the Menu button on the Parent Unit.
2. Navigate to the ECO mode setting.
3. Select 'On' to activate ECO mode. You may also adjust the sound sensitivity level.

Figure 6.1: ECO Mode Operation

6.3 Obousměrná komunikace

Communicate with your baby through the monitor.

1. Press and hold the Talk button on the Parent Unit.
2. Speak clearly into the microphone on the Parent Unit. Your voice will be transmitted to the Baby Unit.
3. Release the Talk button to hear your baby again.

Figure 6.2: Two-Way Talk Function

6.4 Infračervené noční vidění

The Baby Unit automatically activates infrared night vision in low-light conditions, providing a clear black-and-white image on the Parent Unit.

Obrázek 6.3: Porovnání denního a nočního vidění

6.5 Monitorování teploty

The Baby Unit continuously monitors the room temperature and displays it on the Parent Unit's screen. This allows you to ensure a comfortable environment for your baby.

Figure 6.4: Temperature Monitoring Feature

6.6 ukolébavky

Play soothing lullabies to help your baby fall asleep.

1. Press the Lullaby button on the Parent Unit to start playing lullabies.
2. Press the button again to cycle through available lullabies or to stop playback.

Obrázek 6.5: Funkce ukolébavky

6.7 Digitální zoom

Zoom in on the video feed for a closer look at your baby.

1. Zatímco viewing the live feed, press the Zoom button (often integrated with a navigation button or a dedicated icon).
2. The screen will display a magnified view (e.g., 2x zoom).
3. Press the Zoom button again to return to the normal view.

Obrázek 6.6: 2násobný digitální zoom

6.8 Adding Multiple Cameras (Optional)

The GHB Baby Monitor supports connecting up to four cameras to one Parent Unit.

1. Ensure the additional camera(s) are powered on.
2. Access the menu on the Parent Unit and navigate to the 'Camera' or 'Pairing' settings.
3. Select an available camera channel (e.g., CAM2, CAM3, CAM4) and initiate the pairing process.
4. Follow the on-screen prompts to complete pairing. This usually involves pressing a pairing button on the Baby Unit within a short timeframe.
5. Once paired, you can switch between cameras using the dedicated camera switch button or through the menu.

Figure 6.7: Support for Multiple Cameras

7. Údržba

• Čištění: Clean the monitor and camera surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Péče o baterie: To prolong battery life, avoid fully discharging the Parent Unit's battery frequently. If storing the unit for an extended period, charge it fully and then store it in a cool, dry place. Recharge every few months.
• Skladování: Pokud přístroj nepoužíváte, skladujte jej v suchém a bezprašném prostředí.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

GHB products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or the official GHB webwebu. Uschovejte si účtenku jako doklad o koupi.