Konec produktuview
The ECHO CS-3510 is a commercial-grade gas-powered rear handle chain saw designed for various cutting tasks. Its 34.4cc engine provides substantial power, making it suitable for storm clean-up, light firewood cutting, limb trimming, and felling trees up to 28 inches in diameter. The design prioritizes user comfort and productivity with its lighter weight and efficient power delivery.
Image: The ECHO CS-3510 Chain Saw, showcasing its orange and black design with a 16-inch bar.
Klíčové vlastnosti:
- 34.4cc commercial grade gas engine for reliable power.
- Optimized weight for reduced operator fatigue and increased productivity.
- i-30 starter system designed to reduce starting effort by 30%.
- 3-point spring vibration reduction system for enhanced operator comfort during extended use.
- Air injection air cleaner system for improved air filtration and reduced maintenance requirements.
Průvodce nastavením
1. Vybalení a první kontrola
Carefully remove all components from the packaging. Inspect the chain saw for any signs of damage that may have occurred during shipping. Ensure all parts listed in the packing list are present.
2. Fuel and Oil Mixture Preparation
The ECHO CS-3510 requires a specific fuel mixture. Use fresh, unleaded gasoline with an octane rating of 89 or higher, mixed with a high-quality 2-stroke engine oil at a ratio specified in the separate engine manual (typically 50:1). Always mix fuel in a clean, approved fuel container.
3. Instalace lišty a řetězu
- Place the chain saw on a flat, stable surface.
- Sejměte kryt řetězu povolením dvou matic.
- Carefully position the chain around the clutch drum and guide bar, ensuring the cutting edges of the chain are facing the correct direction (refer to directional arrows on the chain).
- Slide the guide bar onto the studs, aligning the chain with the groove in the bar.
- Nasaďte kryt řetězu a ručně utáhněte matice.
- Adjust chain tension using the tensioning screw. The chain should be snug against the bar but still able to be pulled freely by hand.
- Úplně utáhněte matice krytu řetězu.
Obrázek: Strana view of the ECHO CS-3510 Chain Saw, illustrating the guide bar and chain assembly.
4. Filling Fuel and Chain Oil Tanks
Fill the fuel tank with the prepared fuel mixture. Fill the chain oil tank with high-quality bar and chain lubricant. Do not overfill. Ensure caps are securely tightened.
Návod k obsluze
1. Předprovozní kontroly
- Zkontrolujte správné napnutí řetězu.
- Zkontrolujte hladinu paliva a oleje v řetězu.
- Zkontrolujte řetěz, zda není ostrý a poškozený.
- Ujistěte se, že jsou všechny matice a šrouby utaženy.
- Před spuštěním se ujistěte, že je brzda řetězu uvolněná.
2. Starting the Engine (Cold Start)
- Place the chain saw on a firm, flat surface.
- Zapněte brzdu řetězu.
- Přesuňte páčku sytiče do polohy FULL CHOKE.
- Stiskněte pumpičku s palivoměrem 5–7krát, dokud nebude vidět palivo.
- Pull the starter handle firmly and smoothly until the engine "pops" or attempts to start.
- Move the choke lever to the HALF CHOKE or RUN position.
- Pull the starter handle again until the engine starts.
- Před uvolněním brzdy řetězu a zahájením provozu nechte motor několik okamžiků zahřát.
3. Starting the Engine (Warm Start)
For a warm engine, move the choke lever directly to the RUN position and pull the starter handle until the engine starts.
4. Basic Cutting Techniques
- Always maintain a firm grip with both hands on the handles.
- Pro stabilitu se postavte s nohama na šířku ramen.
- Abyste zabránili zpětnému rázu, neřežte špičkou vodicí lišty.
- Plan your cuts to ensure the wood falls safely and away from you.
- Be aware of pinching hazards when cutting through logs under tension.
5. Zastavení motoru
To stop the engine, move the ignition switch to the "OFF" position. Engage the chain brake for safety when not actively cutting.
Plán údržby
Regular maintenance is crucial for the longevity and safe operation of your ECHO CS-3510 chain saw.
Daily Maintenance (Before Each Use):
- Check chain sharpness and tension.
- Inspect guide bar for wear and burrs.
- Verify chain oiler is functioning.
- Clean debris from air filter and cooling fins.
- Zkontrolujte dotažení všech upevňovacích prvků.
Weekly Maintenance (or Every 10 Operating Hours):
- Vyčistěte nebo vyměňte vzduchový filtr.
- Clean spark plug and check gap. Replace if necessary.
- Clean clutch area and chain brake mechanism.
- Inspect fuel filter.
- Rotate guide bar to ensure even wear.
Ostření řetězu:
A sharp chain is essential for safe and efficient cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to your chain's specifications) and a flat file for depth gauges. Alternatively, have the chain professionally sharpened.
Čištění vzduchového filtru:
Remove the air filter cover and carefully remove the air filter. Clean it with warm, soapy water, rinse thoroughly, and allow it to air dry completely before reinstallation. For heavily soiled filters, replacement may be necessary.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nestartuje | No fuel, incorrect choke position, fouled spark plug, clogged fuel filter. | Add fresh fuel, adjust choke, clean/replace spark plug, replace fuel filter. |
| Engine starts but stalls | Incorrect fuel mixture, dirty air filter, carburetor issues. | Use correct fuel mixture, clean air filter, consult service center for carburetor. |
| Řetěz neřeže efektivně | Tupý řetěz, nesprávné napnutí řetězu, opotřebovaná vodicí lišta. | Sharpen chain, adjust tension, replace guide bar. |
| Nadměrné vibrace | Uvolněné komponenty, poškozený řetěz/lišta, nevyváženost motoru. | Check all fasteners, inspect chain/bar for damage, seek professional service. |
Technické specifikace
| Specifikace | Detail |
|---|---|
| Značka | ECHO |
| Číslo modelu | CS-3510-16 |
| Zdroj napájení | Benzínový pohon |
| Zdvihový objem motoru | 34.4 ccm |
| Koňská síla | 2.7 kilowattů |
| Délka řetězu | 16 palce |
| Hmotnost položky | 8.16 libry (130.51 uncí) |
| Rozměry produktu (D x Š x V) | 20 cm D x 12 cm Š x 12 cm V |
| UPC | 743184021644 |
| Výrobce | Echo |
| První k dispozici | 15. července 2020 |
Záruka a podpora
ECHO products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ECHO webmísto.
For technical assistance, parts, or service, please contact an authorized ECHO service dealer. You can find a dealer near you by visiting the ECHO website or contacting their customer support line.
Důležité: Always provide your product model number (CS-3510-16) and serial number when seeking support.
