Solight GSM Remote Controlled Power Socket DY10GSM User Manual

1. Konec produktuview

The Solight GSM Socket DY10GSM is a remote-controlled power outlet designed to manage electrical appliances in your home or office. It allows you to switch power on or off using SMS commands or a dedicated mobile application. Beyond simple remote control, the unit integrates a temperature sensor for thermostat functions and provides an alarm in case of power outages or significant temperature deviations. This device can be expanded to control multiple outlets.

2. Klíčové vlastnosti

• Dálkové ovládání: Manage connected appliances via SMS or mobile application.
• Teplotní senzor: Sleduje okolní teplotu.
• Funkce termostatu: Automatically controls power based on set temperature ranges.
• Power Outage Alarm: Notifies you of power failures.
• Rozšiřitelnost: Supports up to four additional DY10S sockets for controlling up to five outputs individually with one SIM card.
• Plánování: Program power on/off times.
• Vysoký výkon: Supports appliances up to 16A or 3600W.

3. Obsah balení

• 1x Solight GSM Remote Controlled Power Socket DY10GSM
• 1x Uživatelská příručka

4. Bezpečnostní informace

• Před použitím si přečtěte všechny pokyny.
• Zařízení nerozebírejte ani neupravujte.
• Ujistěte se, že je zařízení připojeno k řádně uzemněné zásuvce.
• Nepřekračujte maximální zatížení 16 A / 3600 W.
• Chraňte před vodou a vysokou vlhkostí.
• Toto zařízení je určeno pouze pro vnitřní použití.
• Před čištěním odpojte zařízení od zdroje napájení.

5. Nastavení

5.1 Vložení SIM karty

1. Locate the SIM card slot on the side of the DY10GSM unit.
2. Ensure the device is unplugged from the power outlet.
3. Insert a standard size (2FF) activated GSM SIM card into the slot, ensuring correct orientation. The SIM card should not have a PIN code enabled.
4. Bezpečně zavřete kryt slotu pro SIM kartu.

5.2 Počáteční zapnutí

1. Plug the DY10GSM unit into a standard electrical wall outlet.
2. The power indicator light (usually green) will illuminate.
3. The GSM signal indicator light (usually blue) will flash as it searches for a network. Once connected, it will either glow steadily or flash slowly, depending on the model's specific indication for network connection.

Obrázek 1: Přední strana view of the Solight DY10GSM socket, showing the power and signal indicator lights.

5.3 Pairing and Configuration

The first phone number to send an SMS command to the DY10GSM will automatically be registered as the administrator number. This number has full control over the device.

• Registrace administrátora: Send any valid command (e.g., 'STATUS') via SMS to the SIM card number in the DY10GSM. The device will reply, confirming your number as the administrator.
• Mobilní aplikace: Download the official Solight mobile application (if available) from your smartphone's app store. Follow the in-app instructions to add and configure your DY10GSM device.

6. Návod k obsluze

6.1 Remote Control via SMS

Send the following commands via SMS to the SIM card number in the DY10GSM:

• Zapnout: Send 'ON'
• Vypnout: Send 'OFF'
• Zkontrolujte stav: Send 'STATUS' (provides current power state, temperature, and signal strength).
• Nastavení termostatu: Send 'TEMP_ON_X_Y' to turn on when temperature is below X and off when above Y. (e.g., 'TEMP_ON_18_22' for 18-22°C).
• Disable Thermostat: Send 'TEMP_OFF'
• Nastavit rozvrh: Refer to the full SMS command list in the detailed manual for complex scheduling commands.

6.2 Remote Control via Mobile Application

Once the mobile application is installed and your device is added, you can control the socket through its intuitive interface. The app typically offers:

• One-touch ON/OFF control.
• Zobrazení teploty v reálném čase.
• Thermostat settings and scheduling.
• Napájenítage notifications.
• Management of additional DY10S sockets.

6.3 Výkon Outage Alarm

The DY10GSM will send an SMS notification to the administrator number if it detects a power failure. It will also send a notification when power is restored.

6.4 Expanding with DY10S Sockets

The DY10GSM can control up to four additional DY10S sockets. These expansion sockets are controlled via the main DY10GSM unit. Refer to the DY10S manual for specific pairing and control instructions, typically involving SMS commands from the DY10GSM administrator phone to assign and control each DY10S unit.

Obrázek 2: Zpět view of the Solight DY10GSM socket, illustrating the electrical plug for connection to a wall outlet.

7. Údržba

• Čištění: Disconnect the device from power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Skladování: Pokud zařízení nepoužíváte, skladujte jej na chladném a suchém místě.
• SIM karta: Periodically check the SIM card's credit balance to ensure continuous operation, especially for SMS-based commands and notifications.

8. Řešení problémů

• Device not responding to SMS:
  • Check if the SIM card has sufficient credit.
  • Ensure the SIM card does not have a PIN code enabled.
  • Verify GSM signal strength (blue indicator light).
  • Confirm you are sending commands from the registered administrator number.
  • Check for correct SMS command syntax.
• Power indicator not on:
  • Ujistěte se, že zásuvka je pod proudem.
  • Zkontrolujte, zda je zařízení správně zapojeno.
• Temperature readings are inaccurate:
  • Ensure the device is not placed near heat sources or in direct sunlight.
  • Allow time for the sensor to stabilize after initial power-up.

9. Specifikace

10. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Solight webUschovejte si doklad o koupi pro případné reklamace.