1. Úvod
This manual provides essential information for the safe assembly, operation, and maintenance of your X-PRO 125cc ATV. Please read this manual thoroughly before operating the ATV to ensure proper use and to prevent injury or damage. Keep this manual for future reference.
2. Bezpečnostní informace
WARNING: Operating an ATV can be hazardous. Always wear appropriate safety gear, including a helmet, eye protection, gloves, and sturdy footwear. Adult supervision is required at all times for young users.
- This ATV is designed for off-road use only.
- Never operate the ATV under the influence of alcohol or drugs.
- Always inspect the ATV before each ride.
- Ujistěte se, že všechny šrouby, matice a šrouby jsou bezpečně utaženy.
- Familiarize yourself with all controls before operating.
- Nenoste cestující.
- Observe all local laws and regulations regarding ATV use.
Právní vyloučení odpovědnosti
The manufacturer and its affiliates cannot be held liable for damages, lost revenue, lost wages, lost savings, or any other incidental or consequential damages arising from the purchase, use, or inability to use the product. This includes damages from misuse, natural or personal disasters, or any unauthorized repairs or modifications. Improper installation of parts can be dangerous. Always ensure installation is performed by a certified technician if you are unsure.
3. Nastavení a montáž
Your X-PRO 125cc ATV requires some assembly upon arrival. The main components requiring assembly typically include the handlebar brackets, all four wheels, front and rear racks (if applicable), the rear shock, and the battery. Specific assembly steps may vary slightly by model.
Figure 3.1: X-PRO ATV as received in its shipping box. The ATV will require assembly after unboxing.
Montážní kroky:
- Rozbalení: Carefully remove the ATV from its shipping crate. Inspect for any visible damage during transit.
- Instalace řídítek: Attach the handlebar to the steering column using the provided brackets and hardware. Ensure it is centered and securely tightened.
- Montáž kola: Mount all four wheels. Pay attention to the orientation of the tires and ensure lug nuts are tightened to the manufacturer's specifications.
- Instalace do racku: If included, attach the front and rear racks using the designated mounting points and hardware.
- Instalace zadního tlumiče: Install the rear shock absorber.
- Připojení baterie: Connect the battery. Ensure positive (+) and negative (-) terminals are connected correctly.
- Kontrola před jízdou: Before the first ride, perform a thorough inspection. Check all fasteners for tightness, verify brake function, and ensure tire pressure is correct.
Figure 3.2: Fully assembled X-PRO 125cc ATV, ready for operation.
4. Návod k obsluze
The X-PRO 125cc ATV features an automatic transmission with reverse, simplifying operation for users. Always ensure you are in a safe, open area free of obstacles before starting the engine.
Starting the ATV:
- Ensure the ignition key is inserted and turned to the "ON" position.
- Apply the brake lever.
- Press the electric start button. If the engine is cold, you may need to use the choke.
řízení:
- Forward Motion: Once the engine is running, slowly apply the throttle. The automatic transmission will engage, and the ATV will move forward.
- Reverse Motion: To engage reverse, shift the gear lever to the "R" position. Slowly apply the throttle to move backward.
- brzdění: The ATV is equipped with front drum brakes and a rear disc brake. Use both brakes simultaneously for effective stopping power.
- Ovládání rychlosti: The ATV has a maximum speed of 35+ MPH, which can vary based on rider weight and road conditions. Always operate at a speed appropriate for your skill level and terrain.
Bezpečnostní funkce:
- Headlights and Tail Lights: The ATV is equipped with LED headlights and tail lights for visibility.
- Speed Limiter/Governor: This feature allows for adjustable speed control, which is particularly useful for younger or less experienced riders.
- Safety Stop Switch: An emergency stop switch is provided for immediate engine shutdown.
5. Údržba
Regular maintenance is crucial for the longevity and safe operation of your X-PRO 125cc ATV.
- Kontroly před jízdou: Before each ride, check tire pressure, brake function, and ensure all visible fasteners are tight.
- Výměna oleje: Refer to the engine manual for recommended oil change intervals and type.
- Údržba řetězu: Keep the drive chain clean, lubricated, and properly tensioned.
- Péče o baterie: Check battery terminals for corrosion and ensure the battery is charged. Replace the battery if it shows signs of weakness or failure.
- Kontrola brzd: Regularly inspect brake pads and discs/drums for wear. Adjust or replace as necessary.
- Generální úklid: Keep the ATV clean to prevent dirt and debris from affecting moving parts.
6. Řešení problémů
This section addresses common issues you might encounter with your X-PRO 125cc ATV.
- Motor nenastartuje:
- Check if the ignition key is in the "ON" position.
- Ensure the safety stop switch is not engaged.
- Verify the battery is charged and connections are secure.
- Check for fuel in the tank and ensure the fuel valve is open.
- If cold, try using the choke.
- Loss of Power/Poor Performance:
- Zkontrolujte zapalovací svíčku, zda není znečištěná nebo poškozená.
- Check the air filter for blockage.
- Ensure the carburetor is clean and properly tuned.
- Ověřte kvalitu a průtok paliva.
- Loose Parts/Vibrations:
- Regularly check and tighten all bolts, nuts, and fasteners, especially after initial assembly and during routine maintenance.
- Inspect for worn or damaged components.
- Brzdy neúčinné:
- Check brake fluid levels (for disc brakes).
- Inspect brake pads/shoes for wear.
- Adjust brake cables or hydraulic system as needed.
If you encounter issues not covered here or require further assistance, contact customer support.
7. Specifikace
| Funkce | Detail |
|---|---|
| Motor | 125cc, 4-stroke, Single Cylinder |
| Chladicí systém | Chlazení vzduchem |
| Přenos | Automatic with Reverse |
| Maximální výkon | 5.3 kW/7500 ot./min |
| Maximální točivý moment | 8.0 N·m / 5500 rpm |
| Zapalování | CDI |
| Maximální rychlost | 35+ MPH (varies by rider weight/conditions) |
| Baterie | 12V/5Ah |
| Přední brzda | Buben |
| Zadní brzda | Disk |
| Přední pneumatiky | 19X7-8 |
| Zadní pneumatiky | 18X9.5-8 |
| Maximální nosnost | 198 liber |
| Čistá hmotnost | 229 liber |
| Celková délka | 59.84 palců |
| Celková šířka | 37 palců |
| Celková výška | 36.22 palců |
| Rozvor kol | 37.8 palců |
| Světlá výška | 3.54 palců |
| Světlomet | LED |
| Zadní světlo | Ano |
| Číslo modelu | CT125-4 / ATV-G005 |
| UPC | 731628685811 |
8. Co je v krabici
Upon receiving your X-PRO 125cc ATV, the package should contain the following components:
- X-PRO 125cc ATV (partially assembled)
- Large 19-inch front and 18-inch rear tires (may be unmounted)
- Matching Rims (may be unmounted)
- LED Lights (pre-installed or requiring minor attachment)
- Speed Limiter / Governor mechanism
- Safety Stop Switch
- Montážní materiál (šrouby, matice atd.)
- Uživatelská příručka (tento dokument)
9. Záruka a podpora
Informace o záruce
The product warranty includes 30 days for all defective parts ONLY. This warranty does not cover accidents, abuse, neglect, labor, mechanic fees, or shipping costs, which are the responsibility of the buyer. For warranty claims, please contact the seller directly.
Zákaznická podpora
For technical assistance, troubleshooting, or parts inquiries, please contact the retailer or manufacturer's customer support. Have your model number (CT125-4) and purchase date available when contacting support.
