Konec produktuview
The Scheppach HMS860 1500W Planer is a versatile woodworking machine designed for precise planing of various wood types. Its robust construction and powerful motor ensure efficient and smooth operation for both surfacing and thicknessing tasks.
Figure 1: Scheppach HMS860 1500W Planer, showing its compact design and dust extraction port.
Klíčové vlastnosti
- Výkonný motor 1500 W: Poskytuje ample power for versatile woodworking tasks.
- Two HS Planer Knives: Ensures smooth and precise planing results.
- Compact & Stable Construction: Allows for use in various workshop environments.
- Comfortable Height Adjustment: Achieved via a convenient hand crank.
- Gumové nožičky: Designed to dampen vibration during operation, enhancing stability.
Figure 2: Diagram illustrating key features such as the 1500W motor, swiveling fence, robust build, and space-saving design.
Bezpečnostní pokyny
Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the HMS860 Planer. Keep this manual for future reference.
- Používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, ochrany sluchu a protiprachové masky.
- Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
- Never operate the planer with damaged parts or without all guards in place.
- Disconnect the power supply before making any adjustments, changing blades, or performing maintenance.
- Udržujte ruce a prsty v dostatečné vzdálenosti od oblasti řezání a pohyblivých částí.
- Securely fasten the workpiece before planing to prevent kickback.
- Do not force the tool; let the planer do the work at its intended speed.
Nastavení a montáž
Before initial use, ensure all components are present and properly assembled according to the following steps.
- Rozbalení: Carefully remove the planer and all accessories from the packaging. Inspect for any shipping damage.
- Umístění: Position the planer on a stable, level workbench or stand. The rubber feet will help dampen vibrations. Ensure adequate space around the machine for safe operation and material handling.
- Dust Extraction Connection: Attach a suitable dust extraction system to the dust port. Proper dust collection is crucial for safety and machine longevity.
- Sestava plotu: Install the planing fence, ensuring it is securely fastened and can be adjusted for angle (0-45°). The HMS860 features a stable aluminum fence for improved precision compared to conventional designs.
- Připojení napájení: Connect the planer to a suitable 240V power supply. Ensure the power switch is in the "OFF" position before plugging in.
Figure 3: Illustration highlighting the robust, stable aluminum planing fence of the HMS860 compared to simpler designs found on other machines.
Návod k obsluze
The HMS860 Planer can function as both a surfacing planer and a thicknessing planer. Understanding the transition between these modes is key to its operation.
Switching Between Planing Modes (2-in-1 Function)
The HMS860 offers a convenient 2-in-1 function, allowing easy conversion between thicknessing and surfacing operations. Refer to the machine's specific levers and locks for this transition.
Figure 4: Diagram illustrating the 2-in-1 functionality, showing how the machine can be configured for both thicknessing and surfacing operations.
Surfacing (Jointing) Operation
- Ensure the machine is configured for surfacing.
- Adjust the infeed table to the desired cutting depth (maximum 2mm).
- Set the planing fence to the required angle (typically 90° for square edges).
- Zapněte hoblík.
- Feed the workpiece smoothly and consistently across the cutterhead, keeping it firmly against the fence and table.
Thicknessing Operation
- Ensure the machine is configured for thicknessing.
- Use the hand crank to adjust the thicknessing table to the desired final thickness of the workpiece.
- Zapněte hoblík.
- Feed the workpiece into the infeed rollers. The machine will automatically pull the wood through and plane it to the set thickness.
- For best results, take multiple shallow passes rather than one deep pass, especially with hard woods.
Figure 5: The HMS860 planer in operation on a workbench, demonstrating its suitability as a compact table model.
Aplikace
The HMS860 is suitable for planing various types of wood, including solid wood and soft wood, to achieve desired dimensions and smooth surfaces.
Obrázek 6: Přamples of wood types and forms that can be processed with the HMS860, including planks, beams, and boards.
Údržba
Regular maintenance ensures the longevity and optimal performance of your HMS860 Planer. Always disconnect power before maintenance.
- Čištění: After each use, clean the machine thoroughly, removing all wood chips and dust from the tables, cutterhead area, and dust port. Use compressed air or a brush.
- Kontrola čepele: Regularly inspect the planer knives for sharpness and damage. Dull or chipped blades can lead to poor planing quality and increased motor strain. Replace both knives simultaneously if needed.
- Mazání: Periodically lubricate moving parts, such as the height adjustment mechanism and feed rollers, according to the manufacturer's recommendations.
- Table Waxing: Apply a thin coat of paste wax to the planer tables to reduce friction and prevent rust.
- Kontrola pásu: Check the drive belts for wear or damage. Replace if necessary.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stroj se nespustí | No power supply; Safety switch engaged; Overload protector tripped. | Check power connection; Ensure all guards are in place; Reset overload button. |
| Poor planing quality (rough surface, tear-out) | Dull or damaged knives; Incorrect feed rate; Wood grain direction. | Replace knives; Adjust feed rate; Plane with the grain. |
| Wood not feeding through | Feed rollers dirty or worn; Excessive depth of cut. | Clean or replace feed rollers; Reduce depth of cut. |
| Nadměrné vibrace nebo hluk | Loose components; Unbalanced knives; Worn bearings. | Check and tighten all fasteners; Ensure knives are correctly installed and balanced; Contact service if bearings are suspected. |
Specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | 5902210901 (SC-HMS860) |
| Zdroj napájení | Elektrický kabel |
| svtage | 240 voltů |
| Wattage | 1500 wattů |
| Maximální rychlost otáčení | 9000 ot./min |
| Šířka řezu | 204 milimetrů |
| Cutting Depth (Max) | 2 milimetrů |
| Hmotnost položky | 28 kilogramů (61.6 liber) |
| Rozměry produktu | 5.91 cm Š x 33.86 cm V |
| Materiál | Kov |
| Zahrnuté komponenty | Ruční hoblík |
Figure 7: Diagram detailing key dimensions such as thicknessing table size, planing table size, planing width, and passage height.
Záruka a podpora
For warranty information and technical support, please refer to the official Scheppach webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.
Scheppach Contact Information:
- Webmísto: www.scheppach.com (Prosím, zkontrolujte oficiální website for regional contact details)
- Služby zákazníkům: Viz kontaktní sekci na oficiálních stránkách webweb s telefonními čísly nebo e-mailovou podporou.
Protection plans are available for extended coverage. For details, please visit the product page on Amazon or contact the seller.
