HUBERT B089T5FZCB

HUBERT Floor Standing Hand Soap Dispenser with Sign

Návod k použití

Konec produktuview

The HUBERT Floor Standing Hand Soap Dispenser with Sign is designed for convenient and hygienic hand sanitization or soap dispensing in various environments. This automatic, hands-free unit features a durable stainless steel stand with a weighted base for stability and includes a drip tray to maintain cleanliness. The dispenser is refillable and compatible with gel or liquid soap and hand sanitizer (foam not supported). A clear window allows for easy monitoring of product levels, and a blinking LED light indicates when battery replacement is needed. For security, the dispenser includes a lock and key. A removable red 'STOP The Spread of Germs' sign is also included to promote hand hygiene.

Klíčové vlastnosti:

  • Stainless steel stand with weighted base for stability.
  • Automatic, hands-free operation for enhanced hygiene.
  • Compatible with gel or liquid soap/sanitizer (1000 ml capacity).
  • Dispenses 0.8 ml per use.
  • Integrated drip tray to prevent floor messes.
  • Clear window for easy product level monitoring.
  • Blinking LED light for low battery indication.
  • Includes lock and key for security.
  • Removable 'STOP The Spread of Germs' sign.
HUBERT Floor Standing Hand Soap Dispenser with Sign

Figure 1: Fully assembled HUBERT Floor Standing Hand Soap Dispenser with the 'STOP' sign attached.

Nastavení a montáž

Minor assembly is required to set up your dispenser. Please follow these steps carefully:

  1. Rozbalte komponenty: Carefully remove all components from the packaging. You should have the stand base, the vertical pole sections, the dispenser unit, the drip tray, the 'STOP' sign, and any necessary hardware (screws, lock and key).
  2. Sestavte stojan: Attach the vertical pole sections to the weighted base. Ensure all connections are secure.
  3. Nainstalujte baterie: The dispenser requires 4 C batteries (not included). Open the battery compartment, typically located on the back or side of the dispenser unit, and insert the batteries according to the polarity markings. Close the compartment securely.
  4. Attach Dispenser to Stand: Secure the dispenser unit to the top of the assembled stand. Ensure it is firmly attached and stable.
  5. Instalace odkapávací misky: Slide or clip the drip tray into its designated position directly below the dispenser nozzle. This tray collects any excess liquid and helps keep the floor clean.
  6. Attach Sign (Optional): If desired, attach the 'STOP The Spread of Germs' sign to the top of the dispenser unit using the provided hardware. The stand can be used with or without this sign.
Strana view of dispenser on stand

Obrázek 2: Strana view of the dispenser unit mounted on the stand, showing the drip tray.

Dispenser open showing internal reservoir

Figure 3: The dispenser unit with its front cover open, revealing the internal reservoir for refilling.

Návod k obsluze

The HUBERT dispenser is designed for simple, hands-free operation.

  1. Plnění dávkovače: Unlock the dispenser using the provided key and open the front cover. Remove the internal cartridge/reservoir. Fill the reservoir with your preferred gel or liquid hand soap or sanitizer. Do not use foam products. The capacity is 1000 ml (33.81 oz). Reinsert the cartridge and close the cover, ensuring it locks securely.
  2. Automatic Dispensing: Place your hands approximately 2-4 inches below the dispenser nozzle. The built-in sensor will detect your hands and automatically dispense approximately 0.8 ml of product.
  3. Product Level Monitoring: The clear window on the front of the dispenser allows for quick visual inspection of the product level. Refill when the level is low to ensure continuous operation.
Close-up of dispenser with drip tray

Obrázek 4: Detail view of the dispenser's nozzle and drip tray, ready for use.

Údržba

Regular maintenance ensures the longevity and optimal performance of your dispenser.

  • Doplňování: As described in the 'Operating Instructions', refill the dispenser with gel or liquid soap/sanitizer when the product level is low. Always use the provided key to unlock and open the dispenser.
  • Čištění: Regularly wipe down the exterior of the dispenser and the stand with a soft, damp cloth. Clean the drip tray frequently to prevent accumulation of dispensed product and maintain hygiene. The drip tray can be removed for thorough cleaning.
  • Výměna baterie: A blinking LED light on the dispenser indicates that the batteries are low and need replacement. Replace all 4 C batteries simultaneously to ensure proper function. Dispose of old batteries responsibly.
  • Zabezpečení: Always ensure the dispenser is locked after refilling or maintenance to prevent theft or tampering.

Odstraňování problémů

If you encounter issues with your HUBERT dispenser, refer to the following common solutions:

ProblémMožná příčinaŘešení
Dispenser not dispensingNízké nebo vybité baterieCheck for blinking LED light. Replace all 4 C batteries.
Prázdná nádržCheck product level through the clear window and refill if necessary.
Incorrect product typeEnsure only gel or liquid soap/sanitizer is used. Foam products are not compatible.
Obstrukce snímačeEnsure nothing is blocking the sensor below the nozzle.
Dispenser leakingReservoir not seated correctlyOpen the dispenser, remove and re-seat the internal reservoir firmly.
Přeplněná nádržDo not overfill the reservoir. Ensure it is filled to the recommended level.
Sign is wobbly or looseSign not securely attachedTighten the screws securing the sign to the dispenser unit.

Specifikace

AtributDetail
Číslo modeluB089T5FZCB
ZnačkaHUBERT
MateriálPlastic (Dispenser), Stainless Steel (Stand)
BarvaBlack (Dispenser & Stand), Red (Sign)
Kapacita dávkovače1000 ml (33.81 oz)
Dispense Volume0.8 ml per use
Zdroj napájení4 x baterie typu C (nejsou součástí balení)
Hmotnost položky21 libry
Rozměry balení18 x 16 x 7 palce
První k dispozici8. června 2020

Záruka a podpora

For warranty information or technical support regarding your HUBERT Floor Standing Hand Soap Dispenser, please contact the manufacturer or the seller directly. The seller for this product is Hubert Company.

Hubert Company Contact:

Související dokumenty - B089T5FZCB

Předview Návod k montáži stojanu na automatický dávkovač mýdla Hubert
Montážní návod pro stojan na automatický dávkovač mýdla Hubert. Tato příručka podrobně popisuje kontrolu součástí a postupnou montáž stojanu na dávkovač.
Předview HUBERT A1110 Přepětí volitelné výbavytagNávod k obsluze elektronické ochrany (OVP)
Návod k obsluze pro výkonový generátor řady HUBERT A1110 ampzáchranář s OvervolemtagMožnost ochrany e (OVP). Zahrnuje bezpečnost, provoz, údržbu a integraci do testovacích systémů.
Předview HUBERT A1230-01 4-Quadrant Voltage Ampzáchranář - Návod k obsluze
Comprehensive operating instructions for the HUBERT A1230-01 4-Quadrant Voltage Amplifier, covering product description, safety guidelines, operating elements, instructions, application software, integration into test systems, maintenance, support, decommissioning, warranty, directives, contact information, and document history.
Předview HUBERT A1110-P4 Multi-AmpNávod k obsluze adaptéru lifier
Tato provozní příručka obsahuje podrobné pokyny pro multifunkční přístroj HUBERT A1110-P4.AmpAdaptér lifier, který popisuje jeho funkce, bezpečnostní opatření, provoz, údržbu a technické specifikace. Je určen pro uživatele, kteří integrují zařízení do automatizovaných testovacích systémů.
Předview HUBERT A1110-40-QE 4-Quadrant Voltage a proud Amplifier Datasheet
Datasheet for the HUBERT A1110-40-QE, a high-performance, linear, extreme-broadband, precision 4-quadrant voltage a aktuální amplifier. Designed for applications requiring fast-changing signals, it offers flexible operation as a voltage nebo aktuální amplifier with features like adjustable output, comprehensive software control, and robust protection mechanisms. Suitable for research, development, EMC testing, MRI, and more.
Předview HUBERT CMD-100 Current Measuring Device Datasheet
Datasheet for the HUBERT CMD-100, a galvanically isolated current and voltage measuring instrument for laboratory and testing applications. Features include switchable gain, BNC outputs, and internal power supply.