Uživatelská příručka k černé mikrokameře s pevným úhlem

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Bezpečnostní informace

• Před zahájením jakékoli elektrické instalace vždy odpojte baterii vozidla.
• Ujistěte se, že veškeré vedení je řádně izolováno a zajištěno, aby se zabránilo zkratu nebo poškození.
• Nezakrývejte řidiči cestu view nebo rušit ovládání vozidla během instalace.
• Pokud si nejste jisti některou částí instalačního procesu, poraďte se s profesionálním instalatérem.
• This product is intended as an aid and should not replace safe driving practices.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Kabelový svazek
• Návod k použití (tento dokument)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Konec produktuview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Obrázek: Detailní záběr view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Klíčové vlastnosti:

• Kompaktní design: Malý půdorys pro diskrétní instalaci.
• Voděodolný: Stupeň krytí IP68 zaručuje spolehlivý výkon v různých povětrnostních podmínkách.
• Obrazový snímač: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view nebo přední view).
• Montáž: Features an 8MM threaded bolt for secure mounting.

5. Nastavení a instalace

Follow these steps for proper installation of your iBeam Micro Camera:

1. Vyberte místo montáže: Vyberte místo, které poskytuje nerušený view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Připravte montážní povrch: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Montáž kamery: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Připojení kabeláže:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Test funkčnosti: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Bezpečné zapojení: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Návod k obsluze

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Orientace obrazu: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Údržba

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Čištění: Pravidelně čistěte objektiv fotoaparátu měkkým hadříkemamp hadříkem odstraňte nečistoty, prach nebo skvrny od vody, které by mohly ucpat view. Do not use abrasive cleaners.
• Inspekce: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Vyhněte se mytí vysokotlakým čističem: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Řešení problémů

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Specifikace

10. Záruka a podpora

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webUschovejte si účtenku jako doklad o koupi pro případné reklamace.

Výrobce: Metra Electronics Corp