1. Bezpečnostní informace
Please read all instructions carefully before using the Ceenwes Hair Clippers. Keep this manual for future reference.
- Důležité: Always remove the red blade guard before use.
- Keep the appliance dry. Do not use it in the shower or immerse it in water.
- Uchovávejte mimo dosah dětí.
- Do not disassemble the unit. Refer to qualified personnel for repairs.
- Ujistěte se, že je nabíjecí adaptér kompatibilní s vaší místní elektrickou sítí.
- Avoid using the clipper on irritated or damaged skin.
2. Konec produktuview
2.1. Součásti
Figure 2.1: Main components of the Ceenwes Hair Clipper.
- Zastřihovací jednotka: The main body housing the motor, battery, and controls.
- Stainless Steel Shaver Head: Sharp and wear-resistant blades for precise cutting.
- Thumb Taper Lever: Located on the side for adjusting cutting lengths.
- LED displej: Shows battery power and maintenance reminders.
- Přepínač ON/OFF: Controls power and speed settings.
Obrázek 2.2: Detailní view of the Brilliant LED Display.
2.2. Dodávané příslušenství
Obrázek 2.3: Kompletní sada příslušenství.
- 6 vodící hřebeny: 1.5mm (1/16''), 3mm (1/8''), 4.5mm (3/16''), 6mm (1/4''), 10mm (3/8''), 13mm (1/2'').
- Čisticí kartáč: For removing hair debris from the blades.
- Black Long Comb: For styling and guiding hair during cutting.
- Nabíjecí adaptér: For recharging the clipper's battery.
- Red Blade Guard: For protecting the blades when not in use.
- 2 Scissors: For precision cutting and trimming.
- 1 Hair Dressing Cape: To keep clothes clean during haircuts.
- Návod k použití: Tento dokument.
3. Nastavení
3.1. Nabíjení zastřihovače
Before first use, fully charge the clipper. The built-in 2500 mAh lithium-ion battery offers approximately 5 hours of run time on a full charge.
- Connect the charging adapter to the clipper and plug it into a power outlet.
- LED displej zobrazí procenta nabití baterietage (1%-100%) and a flashing charging light when the battery is below 10%.
- Po plném nabití se na displeji zobrazí 100 %.
Figure 3.1: Charging the clipper.
3.2. Připevnění vodicích hřebenů
Select the desired guide comb based on the hair length you wish to achieve. The clipper comes with 6 different comb sizes:
- 1.5mm (1/16'')
- 3mm (1/8'')
- 4.5mm (3/16'')
- 6mm (1/4'')
- 10mm (3/8'')
- 13mm (1/2'')
To attach, align the comb with the clipper blade and push firmly until it clicks into place. To remove, gently pull the comb away from the blade.
Figure 3.2: Guide combs and taper lever for length adjustment.
4. Návod k obsluze
4.1. Základní obsluha
- Press the ON/OFF switch to turn on the clipper. The LED display will illuminate.
- The clipper may have multiple speed settings. Press the ON/OFF switch again to cycle through available speeds.
- To turn off, press the ON/OFF switch until the display turns off.
4.2. Adjusting Cutting Length
The thumb taper lever on the left side of the clipper allows for customization of cutting lengths without changing guide combs. Move the lever up for the closest cut and down for a longer cut. This feature is ideal for blending and fading.
4.3. Hair Cutting Tips
- For best results, ensure hair is clean and dry before cutting.
- Always start with a longer guide comb and gradually reduce the length if needed.
- Hold the clipper flat against the head and move it slowly against the direction of hair growth.
- Use the included long comb to lift hair away from the scalp for easier cutting.
Figure 4.1: Professional hair cutting with the Ceenwes Clipper.
Figure 4.2: Using the clipper for personal grooming.
5. Údržba
5.1. Čištění čepelí
The stainless steel shaver head is washable for easy cleaning. Ensure the clipper is turned off before cleaning.
- Use the included cleaning brush to remove any loose hair from the blades.
- Rinse the blade head under running water. Do not submerge the entire clipper unit.
- Allow the blades to air dry completely before reattaching or storing.
Figure 5.1: Cleaning and blade features.
5.2. Mazání nožů
Regular oiling ensures optimal performance and extends the life of your clipper. The LED display includes a maintenance oil reminder.
- Apply a few drops of the included lubricating oil to the blades after each cleaning or when the oil reminder appears.
- Zapněte zastřihovač na několik sekund, aby se olej rovnoměrně rozprostřel.
Figure 5.2: Oil/Charger Level Indicator on LED display.
6. Řešení problémů
If you encounter any issues with your Ceenwes Hair Clippers, please refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zastřihovač se nezapne. | Baterie je vybitá. | Plně nabijte zastřihovač. |
| Zastřihovač nestříhá efektivně. | Čepele jsou tupé nebo zanesené vlasy. | Vyčistěte a namažte čepele. Pokud jsou tupé, zvažte profesionální nabroušení nebo výměnu. |
| Clipper vydává neobvyklé zvuky. | Čepele potřebují mazání. | Naneste mazací olej na čepele. |
| Výdrž baterie je kratší, než se očekávalo. | Baterie není plně nabitá nebo je stárnoucí. | Ensure full charge. If battery is old, performance may naturally degrade over time. |
If the problem persists after trying these solutions, please contact Ceenwes customer support.
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | K10S-0525 |
| Výrobce | Ceenwes |
| Zdroj napájení | Napájení z baterie (2500 mAh lithium-iontová) |
| Doba běhu | Až 5 hodin (při plném nabití) |
| Materiál čepele | Nerez |
| Barva | Stříbro |
| Doporučená použití | Barber, Shaver, Grooming, Trimmer |
| Kompatibilita typů vlasů | Dobře, všechno |
| Rozměry balení | 9.53 x 6.93 x 3.27 palce |
| Hmotnost položky | 1.68 libry |
8. Záruka a podpora
Ceenwes is committed to providing high-quality products. If you have any problems or questions regarding your hair clippers, please do not hesitate to contact us.
- For detailed warranty information, please refer to the product packaging or visit the official Ceenwes webmísto.
- Contact information for customer support can typically be found on the product packaging or on the Ceenwes brand store page on Amazon.
