Zavedení
This manual provides essential information for the safe operation, assembly, and maintenance of your X-PRO Hawk 250 Dirt Bike Motorcycle. Please read this manual thoroughly before operating the motorcycle to ensure proper use and longevity.
Bezpečnostní informace
Always wear appropriate safety gear, including a helmet, eye protection, gloves, and protective clothing, when operating the motorcycle.
Před každou jízdou se ujistěte, že všechny komponenty jsou bezpečně upevněny a v dobrém provozním stavu.
Neřiďte motocykl pod vlivem alkoholu nebo drog.
Observe all local traffic laws and regulations if operating on public roads.
Udržujte ruce a nohy v dostatečné vzdálenosti od pohyblivých částí, zejména řetězu a kol.
Co je v krabici
- X-PRO Hawk 250 Dirt Bike Motorcycle (partially assembled)
- Návod k použití
- Sada nářadí
- Paperwork for street legal registration (sent separately)
Shromáždění
Your X-PRO Hawk 250 requires some assembly upon arrival. While specific instructions are provided in the included manual, general assembly steps typically include:
- Attaching the handlebar brackets and handlebars.
- Installing the front wheel.
- Connecting and adjusting the brakes.
- Mounting the number plate and front fender.
- Connecting the rear shock (if not pre-mounted).
- Charging the battery before first use.
It is recommended to have an additional person assist during certain assembly steps, such as holding the bike upright before the front wheel is installed.
Důležité: Apply blue Loctite to all fasteners during assembly to prevent loosening from vibrations.

Figure 1: Fully assembled X-PRO Hawk 250 Dirt Bike Motorcycle.

Obrázek 2: Přední strana view of the X-PRO Hawk 250, highlighting the handlebars and front wheel assembly area.
Nastavení
After assembly, perform the following setup steps:
- Tankování: Fill the fuel tank with appropriate gasoline. Refer to the specific fuel type recommended in your detailed manual.
- Oil Check: Verify engine oil levels. It is highly recommended to drain and replace the factory-supplied oil with fresh engine oil before first use.
- Tlak v pneumatikách: Check and adjust tire pressure to the recommended PSI for both front and rear tires.
- Controls Adjustment: Adjust clutch and throttle cables for proper tension and smooth operation.
- Kontrola brzd: Ensure both front and rear brakes are functioning correctly and provide adequate stopping power.
- Světla a signály: Test all lights (headlight, taillight, turn signals) and the horn for functionality.
Návod k obsluze
Starting the Motorcycle
The X-PRO Hawk 250 features both electric and kick start options.
- Ensure the motorcycle is in neutral.
- Otočte klíček zapalování do polohy „ON“.
- If the engine is cold, engage the choke.
- For electric start: Press the electric start button.
- For kick start: Use the kick starter lever with a firm, swift motion.
- Once the engine starts, gradually disengage the choke as the engine warms up.
Video 1: Demonstration of a cold start for the X-PRO Hawk 250. This video shows the process of turning on the ignition, engaging the choke, and using the electric start to successfully start the motorcycle. It also demonstrates the engine running and the sound of the exhaust.
Riding the Motorcycle
Familiarize yourself with the controls before riding. The motocross-style seat allows for maximum rider movement, suitable for various terrains.
- Engage the clutch, select first gear, and slowly release the clutch while applying throttle to move forward.
- Shift gears smoothly as needed, coordinating throttle and clutch.
- Pro efektivní brzdění používejte přední i zadní brzdu.
Údržba
Regular maintenance is crucial for the performance and longevity of your X-PRO Hawk 250.
- Výměna oleje: Regularly change the engine oil. It is recommended to drain the factory oil and replace it with fresh oil immediately after purchase.
- Vůle ventilů: Check valve clearance periodically. The manual specifies the correct clearance (e.g., 0.002 inches). Incorrect clearance can affect engine performance.
- Údržba řetězu: Keep the drive chain clean, lubricated, and properly tensioned.
- Brzdový systém: Inspect brake pads and fluid levels regularly. The bike features braided stainless steel brake lines for enhanced performance.
- Kontrola pneumatik: Check tires for wear, damage, and proper inflation before each ride.
- Kontrola upevňovacích prvků: Periodically check all nuts and bolts for tightness, especially after initial break-in.
- Zapalovací svíčka: Consider upgrading and changing the spark plug, especially if installing an aftermarket carburetor, to ensure optimal ignition.

Obrázek 3: Strana view of the X-PRO Hawk 250, showing the engine and exhaust system, key areas for maintenance.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nenastartuje nebo se startuje obtížně | Low battery, no fuel, choke not engaged (cold), spark plug issue, carburetor issue. | Charge battery, add fuel, engage choke, check/replace spark plug, inspect carburetor. |
| Speedometer inaccurate or not working | Speedometer cable too short or kinked, sensor issue. | Inspect cable for kinks, consider replacing with a longer cable if necessary. Use GPS for accurate speed. |
| Engine runs hot / running lean | Stock carburetor too small, incorrect valve clearance. | Consider upgrading carburetor (e.g., Nibbi FL28), adjust valve clearance to manual specifications. |
| Fuel gauge not working | Porucha snímače. | Keep track of miles driven or utilize the reserve tank. Contact support for replacement if desired. |
Specifikace
- Značka: X-PRO
- Model: DB-W022
- Hmotnost položky: 265 libry
- Rozměry produktu: 82.3 x 36.2 x 55.1 palce
- Speciální vlastnosti: Electric start, fat tire
- kola: Big 21"/18" Wheels
- Sedadlo: Motocross-style, low and comfortable
- Vyčerpat: Stylish high-performance exhaust pipe
- brzdy: Braided stainless steel brake lines
Záruka a podpora
XPROUSA is committed to providing excellent customer support and stands behind its products. For any issues, parts requests, or technical assistance, please contact XPROUSA customer service.
They maintain a stock of parts for most vehicles sold, ensuring fast and reliable support.
Contact information can typically be found on the X-PRO webwebu nebo prostřednictvím vaší nákupní platformy.

Figure 4: XPROUSA's dedicated after-sales team is available for support.





