Zavedení
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Truma CP Plus Control Unit. Please read this manual carefully before using the device to ensure safe and efficient operation. Keep this manual for future reference.
Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní opatření:
- Před instalací nebo údržbou se ujistěte, že je odpojeno napájení.
- Instalaci by měl provádět pouze kvalifikovaný personál.
- Nevystavujte jednotku extrémním teplotám nebo vlhkosti.
- Nepokoušejte se jednotku opravovat sami. Kontaktujte kvalifikovaný servisní personál.
- Use only original Truma accessories and spare parts.
Konec produktuview
The Truma CP Plus is a central control unit designed for Truma heating and air conditioning systems in recreational vehicles. It allows for precise control and monitoring of various climate functions.
Obrázek 1: Přední view of the Truma CP Plus Control Unit. The display shows a temperature of 22 degrees Celsius, with icons indicating heating, water heater, and fan functions. A rotary knob is located below the display, and a return button is on the left. The unit is labeled "Truma iNet ready".
Nastavení
1. Montáž řídicí jednotky
Choose a suitable location for mounting the control unit, ensuring it is easily accessible and visible. Avoid direct sunlight or heat sources. Secure the unit using appropriate screws (not included) through the designated mounting holes.
2. Elektrické připojení
Connect the Truma CP Plus to your vehicle's 12V power supply and to the Truma heating/air conditioning system using the provided wiring harness. Ensure correct polarity. Refer to the wiring diagram in your system's main manual for detailed connection points.
- Červený drát: +12V DC
- Černý drát: Země (GND)
- Data bus wires: Connect to the Truma iNet Box or directly to compatible appliances.
3. Počáteční zapnutí
Once all connections are secure, switch on the 12V power supply. The unit display should illuminate. Follow the on-screen prompts for initial setup, including language selection and system pairing.
Návod k obsluze
1. Pohyb v nabídce
Use the rotary push button to navigate through the menu options. Turn the knob to scroll and press to select. The back button (left of the knob) returns to the previous screen.
2. Nastavení teploty
From the main screen, turn the rotary knob to adjust the desired room temperature. The new temperature will be displayed and automatically set.
3. Výběr provozního režimu
Press the rotary knob to enter the main menu. Select "Operating Mode" to choose between heating, hot water, or combined modes. Available options depend on connected Truma appliances.
4. Funkce časovače
Access the "Timer" menu to program specific heating or hot water times. You can set start and end times, and desired temperatures for different periods.
5. Nastavení rychlosti ventilátoru
If connected to a Truma air conditioning system, navigate to the "Fan" menu to adjust fan speed settings (e.g., Eco, Night, High).
Údržba
The Truma CP Plus Control Unit requires minimal maintenance. Follow these guidelines to ensure longevity:
- Čištění: Otřete displej a casing s měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Aktualizace softwaru: Periodically check the Truma website or consult your dealer for available software updates for your unit. Updates can improve performance and add new features.
- Spojení: Každoročně kontrolujte všechny elektrické spoje, zda nejsou těsné a zda nejsou korozi.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka se nezapne. | Žádné napájení; Spálená pojistka; Uvolněné spojení. | Check 12V power supply; Inspect vehicle fuse box; Verify all electrical connections. |
| Displej zobrazuje chybový kód. | Connected appliance fault; Communication error. | Refer to the specific error code in the main Truma appliance manual; Check data bus connections. |
| Temperature not regulating correctly. | Incorrect settings; Sensor issue. | Verify desired temperature and operating mode; Contact service if issue persists. |
If the problem persists after attempting the above solutions, please contact Truma customer support or an authorized service partner.
Specifikace
- Značka: Truma
- Číslo modelu: Reimo 721982
- ASIN: B087X7F78P
- Barva: Neutrální
- Napájení: 12V DC (typical for RV applications)
- Kompatibilita: Truma heating and air conditioning systems with iNet Box or compatible interfaces.
- Země původu: Švýcarsko
Záruka a podpora
For warranty information, please refer to the documentation provided with your Truma heating or air conditioning system, or visit the official Truma website. Truma does not provide specific information on spare parts availability or software update guarantees for this control unit directly in the product specifications.
For technical support, service, or to find an authorized Truma service partner, please visit the official Truma website or contact their customer service department. Always provide your model number (Reimo 721982) and ASIN (B087X7F78P) when seeking support.
Truma Official Webmísto: www.truma.com
