Otech 1N150X2-13094663

Otech 1N150X2-13094663 Battery User Manual

Compatible with Siemens Gigaset 1010

1. Úvod

This manual provides essential instructions for the safe and effective use of your Otech 1N150X2-13094663 rechargeable battery, designed for compatibility with Siemens Gigaset 1010 cordless phones. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your battery.

Two Otech 1.2V 1500mAh Ni-MH batteries

Image 1.1: Two Otech 1.2V 1500mAh Ni-MH batteries. These batteries are green with "Otech Ni-MH BATTERY 1.2V 1500mAh" printed on them.

2. Vlastnosti produktu

The Otech 1N150X2-13094663 battery offers several key features:

  • Optimal Service Life: Equipped with high-quality cells, these batteries are designed to provide a longer operational life compared to standard batteries.
  • Nízké samovybíjení: High-quality internal cells minimize self-discharge, reducing power loss when the battery is not in active use or stored for extended periods.
  • Pre-Shipping Quality Assurance: Each battery undergoes a charging and capacity test before shipment to ensure functional performance upon arrival.

3. Obsah balení

Your package should contain the following item(s):

  • 1 or 2 x Otech 1N150X2-13094663 Ni-MH Battery (1.2V, 1500mAh)

Note: The quantity of batteries may vary based on your purchase. Please refer to your order details.

4. Nastavení a instalace

Follow these steps to install the battery in your Siemens Gigaset 1010 cordless phone:

  1. Vypnout: Ensure your cordless phone handset is powered off and disconnected from its charging base.
  2. Najděte přihrádku na baterie: Identify and open the battery compartment cover on the back of your Siemens Gigaset 1010 handset. This usually involves sliding a cover or pressing a latch.
  3. Vyjměte starou baterii (pokud je k dispozici): Carefully disconnect and remove any existing battery from the compartment.
  4. Vložení nové baterie: Insert the Otech 1N150X2-13094663 battery into the compartment, ensuring the polarity (+ and - terminals) matches the markings inside the compartment.
  5. Zavřít přihrádku: Bezpečně nasaďte kryt prostoru pro baterie.
  6. Počáteční poplatek: Place the handset on its charging base. Allow the battery to charge for at least 12-16 hours before its first use, even if the phone indicates a full charge sooner. This initial charge helps optimize battery performance.

5. Návod k obsluze

Once installed and initially charged, your Otech battery will power your Siemens Gigaset 1010 phone. Observe the following for optimal operation:

  • Pravidelné nabíjení: For best performance, return the handset to its charging base when not in use.
  • Full Discharge Cycles: Periodically (e.g., once a month), allow the battery to fully discharge before recharging it completely. This can help maintain battery capacity over time.
  • Zabraňte nadměrnému vybití: Do not leave the battery completely discharged for extended periods, as this can reduce its lifespan.

6. Údržba

Proper maintenance can extend the life of your Otech battery:

  • Vyčistit kontakty: Occasionally, gently wipe the battery contacts and the phone's charging contacts with a clean, dry cloth to ensure good electrical connection.
  • Teplota: Store and operate the battery within recommended temperature ranges (typically 0°C to 45°C or 32°F to 113°F). Avoid extreme heat or cold.
  • Skladování: If storing the battery for an extended period, charge it to about 50% capacity and store it in a cool, dry place. Recharge it every few months to prevent deep discharge.
  • Likvidace: Do not dispose of batteries in household waste. Follow local regulations for proper recycling of Ni-MH batteries.

7. Řešení problémů

Pokud máte problémy s baterií, zvažte následující:

ProblémMožná příčinaŘešení
Baterie se nenabíjí.
  • Nesprávná instalace.
  • Špinavé kontakty.
  • Faulty charging base or power adapter.
  • Baterie je zcela vybitá.
  • Re-install battery, ensuring correct polarity.
  • Clean battery and phone contacts.
  • Test charging base/adapter with another known-good battery/phone if possible.
  • Leave on charger for an extended period (up to 24 hours) to revive a deeply discharged battery.
Short operating time after charging.
  • Baterie není plně nabitá.
  • Battery capacity degradation (normal wear).
  • High power consumption by phone.
  • Ensure initial 12-16 hour charge.
  • Perform several full discharge/recharge cycles.
  • If battery is old, consider replacement.
  • Check phone settings for power-saving options.

8. Specifikace

AtributDetail
ZnačkaOtech
Číslo modelu1N150X2-13094663
Typ baterieNi-MH (nikl-metalhydrid)
svtage1.2V
Kapacita1500 XNUMX mAh
KompatibilitaSiemens Gigaset 1010 (and other compatible models)
VýrobceOTech
Datum první dostupnosti7. listopadu 2023

9. Informace o záruce

Specific warranty details for the Otech 1N150X2-13094663 battery are not provided in this manual. Please refer to your purchase documentation, the seller's webstránky nebo se obraťte přímo na prodejce s žádostí o informace týkající se záručního krytí a podmínek.

10. Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Otech battery, please contact the seller or manufacturer directly through the platform where the purchase was made. Ensure you have your order number and product details available when contacting support.

Documents - Otech – 1N150X2-13094663

žádné relevantní dokumenty