ID-COOLING SE-224-XT RGB CPU Cooler

1. Úvod

The ID-COOLING SE-224-XT RGB is a high-performance CPU air cooler designed to provide efficient heat dissipation for a wide range of Intel and AMD processors. Featuring four direct-contact heat pipes, a 120mm PWM fan with RGB lighting, and a robust heatsink design, this cooler offers an optimal balance of cooling capability, low noise operation, and aesthetic appeal.

The ID-COOLING SE-224-XT RGB CPU Cooler, showcasing its black heatsink, RGB fan, and overall compact design.

2. Bezpečnostní opatření

• Před instalací nebo údržbou vždy odpojte počítač od napájení.
• Handle components with care to avoid damage to the CPU, motherboard, or cooler.
• Noste antistatický náramek, abyste zabránili poškození citlivých elektronických součástek elektrostatickým výbojem (ESD).
• Uchovávejte mimo dosah dětí.
• Do not attempt to modify the cooler or its components.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou v balení přítomny všechny komponenty:

• ID-COOLING SE-224-XT RGB Heatsink
• 120mm PWM RGB Fan
• Universal Mounting Brackets (for Intel and AMD sockets)
• Zadní deska
• Montážní šrouby a podložky
• Termální pasta
• Klipy pro fanoušky
• RGB Splitter Cable (if included)

Components of the ID-COOLING SE-224-XT RGB CPU Cooler's mounting kit, including brackets, screws, and backplate, essential for secure installation on various CPU sockets.

4. Instalační příručka

4.1. Příprava

1. Vypněte počítač a odpojte napájecí kabel.
2. Open your computer case and locate the CPU socket.
3. Remove any existing CPU cooler. Clean the CPU surface thoroughly to remove old thermal paste using isopropyl alcohol.
4. Identify the correct mounting hardware for your CPU socket (Intel LGA115X/1200/1700/2011/2066 or AMD AM4/AM5).

4.2. Mounting the Heatsink

1. Attach the appropriate mounting brackets to the heatsink base using the provided screws.
2. For AMD AM4/AM5, remove the plastic retention clips from the motherboard, but keep the original backplate. For Intel, install the universal backplate behind the motherboard, aligning the holes.
3. Apply a small pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS).
4. Carefully place the heatsink onto the CPU, aligning the mounting holes with the standoffs or backplate. For AM4, it is recommended to screw in the top hole first loosely, then the bottom, before tightening both.
5. Secure the heatsink by tightening the spring-loaded screws in a diagonal pattern until snug. Do not overtighten.

Detailní záběr view of the cooler's base, highlighting the four direct-contact copper heat pipes designed for efficient heat transfer from the CPU.

4.3. Installing the Fan

1. Attach the 120mm PWM RGB fan to the heatsink using the provided fan clips. Ensure the fan is oriented to blow air through the heatsink towards the rear exhaust of your case.
2. The fan features de-vibration rubber pads on its corners to reduce noise.

Close-up of the fan's corner, illustrating the de-vibration rubber pads integrated into the fan frame to minimize operational noise.

4.4. Propojovací kabely

1. Připojte 4pinový kabel PWM ventilátoru ke konektoru CPU_FAN na základní desce.
2. Connect the 4-pin 12V RGB cable to a compatible 12V RGB header on your motherboard. If your motherboard has multiple RGB headers, use the provided splitter cable if necessary.

The ID-COOLING SE-224-XT RGB CPU Cooler installed inside a PC case, with its RGB lighting illuminated, demonstrating its aesthetic integration.

5. Provoz

5.1. Fan Control (PWM)

The 120mm fan supports Pulse Width Modulation (PWM), allowing your motherboard to dynamically control the fan speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise during low-load operations. Fan speeds can range from 700 to 1800 RPM.

Image of the 120mm PWM fan, emphasizing its ability to adjust speeds between 700-1800 RPM for optimal balance between cooling performance and noise levels.

5.2. RGB osvětlení

The integrated RGB lighting on the fan and heatsink can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard has a 12V 4-pin RGB header for compatibility.

6. Údržba

• Odstranění prachu: Periodically clean the heatsink fins and fan blades to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air or a soft brush.
• Teplovodní pasta: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste after cleaning the CPU and cooler base.
• Kontrola ventilátoru: Check the fan for any unusual noises or wobbling. Ensure the fan cables are securely connected.

7. Řešení problémů

• Vysoké teploty procesoru:
  • Ensure the cooler is properly seated and tightened.
  • Zkontrolujte, zda byla teplovodivá pasta nanesena správně a rovnoměrně.
  • Check for dust buildup on the heatsink fins and fan.
  • Confirm the fan is spinning and connected to the CPU_FAN header.
• Ventilátor se netočí:
  • Check the 4-pin PWM cable connection to the motherboard's CPU_FAN header.
  • Ensure the fan is not obstructed.
  • Check BIOS settings for fan control.
• Nefunkční RGB osvětlení:
  • Verify the 4-pin 12V RGB cable is correctly connected to a compatible 12V RGB header on the motherboard.
  • Ujistěte se, že je software RGB vaší základní desky správně nainstalován a nakonfigurován.
  • Check for any loose connections or damaged pins on the RGB cable or header.

8. Technické specifikace

Diagram showing the CPU cooler's design ensures non-interference with RAM modules, even on Mini-ITX motherboards with tall memory sticks.

9. Záruka a podpora

For warranty information and technical support, please refer to the official ID-COOLING webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Oficiální Webmísto: www.idcooling.com