FLIPSKY Electric Speed Controller Mini FSESC4.20 50A User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the FLIPSKY Mini FSESC4.20 50A Electric Speed Controller. This ESC is designed for various electric mobility applications, including electric skateboards, longboards, scooters, and e-bikes. Please read this manual thoroughly before using the product to ensure proper function and safety.

Figure 1: FLIPSKY Mini FSESC4.20 50A Electric Speed Controller

2. Vlastnosti produktu

The FLIPSKY Mini FSESC4.20 50A incorporates several design enhancements for improved performance and reliability:

• Enhanced Capacitors: Features imported capacitors with verified performance, offering superior stability compared to standard FSESC4.12.
• Authentic Power MOSFETs: Utilizes 6 authentic NTMFS5C628NL power MOSFETs, imported from the USA, ensuring reliable quality as used in the FSESC6.6.
• Mini USB port: Equipped with a widely used Mini USB port for convenient connectivity and configuration.
• Kompaktní design: Small size and lighter weight allow for versatile installation in various products.
• Všestranná aplikace: Highly modifiable for DIY electric skateboard conversions, e-bikes, and e-scooters.

Figure 2: Hardware Improvements of FSESC4.20

Figure 3: Mini USB Port Detail

3. Obsah balení

Po otevření balení se prosím ujistěte, že obsahuje všechny následující položky:

• FLIPSKY Mini FSESC4.20 50A Electric Speed Controller
• Mini USB kabel
• Various connection wires (e.g., sensor wire, receiver wire)
• Návod k použití (tento dokument)

Obrázek 4: Obsah balení

4. Nastavení

Proper setup is crucial for the safe and efficient operation of your ESC. Follow these general steps for installation and initial configuration:

1. Montáž: Securely mount the ESC in a location that allows for adequate airflow and protects it from physical damage and moisture.
2. Připojení baterie: Connect the main power wires (red for positive, black for negative) from your battery to the corresponding terminals on the ESC. Ensure correct polarity to prevent damage.
3. Připojení motoru: Connect the three phase wires from your motor to the ESC's motor output terminals (A, B, C). The order may affect motor direction, which can be adjusted in software.
4. Kabel senzoru (volitelný): If your motor has sensor wires, connect them to the sensor port on the ESC. This provides smoother low-speed operation.
5. Připojení přijímače: Connect the signal wire from your remote control receiver to the appropriate port on the ESC (typically PPM/PWM or UART).
6. Konfigurační software: Connect the ESC to a computer using the Mini USB cable. Use the VESC Tool software to configure motor parameters, battery settings, input type, and other advanced features. Refer to the VESC Tool documentation for detailed instructions on calibration and setup.

Obrázek 5: Schéma zapojení

5. Návod k obsluze

Once the ESC is properly installed and configured, follow these steps for operation:

1. Zapnutí: Ensure all connections are secure. Power on your battery pack. The ESC should emit a series of beeps indicating it has initialized.
2. Remote Control Pairing/Calibration: If using a new remote, ensure it is paired with its receiver and calibrated according to its manual and the VESC Tool settings.
3. Ovládání škrticí klapky: Gradually apply throttle using your remote control. The motor should respond smoothly. Avoid sudden full throttle or braking, especially during initial tests.
4. Sledování: If possible, monitor ESC temperature and battery voltage during operation, especially during demanding use.
5. Vypnout: Always power off the battery first when you are finished operating the device.

6. Údržba

Regular maintenance helps prolong the lifespan and ensure the reliability of your ESC:

• Udržujte v čistotě: Periodically clean the ESC and its heat sink to prevent dust and debris buildup, which can impede cooling. Use a soft brush or compressed air.
• Kontrola připojení: Regularly check all wire connections for looseness, corrosion, or damage. Secure any loose connections.
• Monitorování teploty: Avoid operating the ESC at excessively high temperatures. Ensure adequate ventilation, especially during prolonged or high-power usage.
• Aktualizace firmwaru: Check the official FLIPSKY website or VESC Project resources for any available firmware updates. Updates can improve performance and add new features.
• Skladování: When not in use for extended periods, store the ESC in a dry, cool environment.

7. Řešení problémů

If you encounter issues with your FLIPSKY Mini FSESC4.20 50A, refer to the following common problems and solutions:

8. Specifikace

Key technical specifications for the FLIPSKY Mini FSESC4.20 50A Electric Speed Controller:

Obrázek 6: Rozměry produktu

Figure 7: Integrated Heat Sink

9. Záruka a podpora

The FLIPSKY Mini FSESC4.20 50A comes with a 2-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use conditions. It does not cover damage resulting from improper installation, misuse, accidents, unauthorized modifications, or exposure to extreme conditions.

For technical support, warranty claims, or further inquiries, please contact FLIPSKY customer service through their official website or the retailer from whom you purchased the product. Provide your product model and purchase details for efficient assistance.