Sunco 6-Pack 6-Inch LED Flush Mount Disk Light Instruction Manual

1. Úvod

Thank you for choosing Sunco Lighting. This manual provides detailed instructions for the safe installation, operation, and maintenance of your Sunco 6-Pack 6-Inch LED Flush Mount Disk Lights. Please read this manual thoroughly before installation and retain it for future reference.

Image: Six Sunco 6-inch LED flush mount disk lights, showing their sleek, round design.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí požáru nebo úrazu elektrickým proudem. Instalace sady LED Retrofit Kit vyžaduje znalost elektrických systémů svítidel. Pokud nemáte kvalifikaci, nepokoušejte se o instalaci. Kontaktujte kvalifikovaného elektrikáře.

• Před instalací nebo údržbou odpojte napájení.
• Zajistěte přívod objtage je 120V AC.
• Během instalace sady nevytvářejte ani neupravujte žádné otevřené otvory v krytu kabeláže nebo elektrických součástí.
• Abyste předešli poškození nebo otěru kabeláže, nevystavujte kabeláž hranám plechu nebo jiným ostrým předmětům.
• Toto zařízení není určeno pro použití s ​​nouzovými východy.
• Vhodné pro damp umístění.

3. Obsah balení

Each pack includes:

• 6 x Sunco 6-Inch LED Flush Mount Disk Lights
• TP24 Connectors
• E26 Connectors
• Wire Nuts (for Junction Box installation)
• Spring Clips (pre-attached for Can Install)
• Montážní šrouby

4. Specifikace

Image: Key specifications of the LED Disk Light including 1050 Lumens, 110° Beam Angle, and 15W Wattage.

Image: The 3000K Warm White light output, designed for a pleasant ambiance.

Image: Diagram showing the compact size of the disk light, with a 7.5-inch diameter and 2-inch height, along with installation accessories.

5. Pokyny k instalaci

The Sunco LED Disk Lights offer versatile installation options for both existing recessed cans and direct wiring to a junction box.

Image: Visual guide illustrating three installation methods: Junction Box with wire nuts, TP24 Can Connection with spring clips, and E26 Can Connection with spring clips.

5.1. Option 1: Recessed Can Installation (TP24 or E26)

1. Vypnout napájení: Ensure power to the fixture is turned off at the circuit breaker.
2. Remove existing trim and bulb: Carefully remove the old trim and unscrew the existing bulb from the recessed can.
3. Připojte adaptér: Screw the appropriate adapter (TP24 or E26) into the socket of the recessed can.
4. Connect disk light: Plug the disk light's connector into the adapter.
5. Secure disk light: Gently push the disk light into the recessed can. The spring clips will hold it securely in place. Ensure the light is flush with the ceiling.

5.2. Option 2: Junction Box Installation

1. Vypnout napájení: Ensure power to the junction box is turned off at the circuit breaker.
2. Připravte dráty: Strip the ends of the house wiring (live, neutral, ground) if necessary.
3. Připojte dráty: Use the provided wire nuts to connect the disk light's wires to the corresponding house wires (black to black, white to white, green/bare copper to ground).
4. Mount disk light: Align the disk light with the junction box and secure it using the provided mounting screws. Ensure the light is flush with the ceiling.

6. Návod k obsluze

Your Sunco LED Flush Mount Disk Light is designed for easy operation and features dimmable capabilities.

6.1. Zapnutí/vypnutí

Simply use your standard wall switch to turn the light on or off. For optimal performance and energy savings, ensure the light is off when not in use.

6.2 Funkce stmívání

This LED disk light is 10%-100% dimmable, allowing you to adjust the brightness to your desired level. To utilize the dimming feature, you must connect the light to a compatible LED dimmer switch (sold separately).

Image: Illustration of the 10% to 100% dimmable range of the LED disk light, controlled by a compatible dimmer switch.

Image: A living room scene demonstrating the adjustable brightness of the dimmable LED disk lights from 10% to 100% via a dimmer switch.

6.3. Compatible Dimmers

For optimal dimming performance, use one of the following recommended dimmer models:

Image: A table listing compatible dimmer models from brands like Lutron and Leviton.

Image: An extended table listing additional compatible dimmer models from various brands.

7. Údržba

The Sunco LED Flush Mount Disk Light requires minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je svítidlo vypnuté. Otřete svítidlo měkkým, suchým nebo lehce vlhkým hadříkem.amp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
• Bez výměny žárovky: These LED fixtures have integrated LED chips and do not require bulb replacement.
• Inspekce: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

8. Řešení problémů

If you encounter issues with your LED disk light, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Sunco Lighting customer support.

9. Záruka a podpora

Sunco Lighting stands behind the quality of its products.

Image: Sunco Lighting's commitment to quality, highlighting 7-year coverage, 45-year lifetime (based on 3 hours/day usage), and reliable customer support.

Tento produkt je dodáván s a Roční ochrana warranty. For warranty claims or technical assistance, please contact Sunco Lighting customer support directly. Our knowledgeable support specialists are available to assist you.

Kontaktní údaje: Please refer to the official Sunco Lighting webNejnovější kontaktní údaje naleznete na webových stránkách nebo v dokumentaci k nákupu.

10. About Sunco Lighting

Sunco Lighting is an American company dedicated to providing high-quality, energy-efficient lighting solutions. With over 25 years of expertise, we prioritize customer satisfaction by rigorously testing all products in-house and offering industry-leading warranties.