Zavedení
This manual provides comprehensive instructions for the installation, operation, and maintenance of your hygger Aquarium Programmable LED Light, Model HG-957. This light is designed to provide optimal lighting conditions for freshwater aquariums, supporting both fish and plant health with its full spectrum capabilities and programmable features.
Obrázek: Nahoře a dole view of the hygger Aquarium Programmable LED Light, showing the LED array and the control panel.
Důležité bezpečnostní pokyny
- Před použitím si pečlivě přečtěte všechny pokyny.
- Nepoužívejte, pokud je kabel nebo zástrčka poškozená.
- Ensure the light is securely mounted above the aquarium and cannot fall into the water.
- Always unplug the light before performing any maintenance on the aquarium or the light itself.
- Tento výrobek je určen pouze pro vnitřní použití.
- Uchovávejte mimo dosah dětí.
- Jáamp beads are IP68 waterproof, but the power adapter and control panel are not. Avoid splashing water on these components.
Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- hygger Aquarium Programmable LED Light Unit (Model HG-957)
- Výsuvné konzoly (2 kusy)
- Power Adapter (DC15V output)
- Návod k použití
Image: Illustration of the separable power adapter connection.
Vlastnosti produktu
- Čtyři režimy svícení: Default, DIY, Gradient, and All-day All-optical modes for versatile lighting control.
- Sunrise to Sunset Simulation: Default mode simulates natural light cycles.
- Customizable DIY Mode: Set 8 stages of brightness (10 levels) and time for personalized lighting.
- IP68 Waterproof Lamp Korálky: Ensures durability and ease of cleaning.
- Separable Adapter: Allows for easy replacement without replacing the entire light unit.
- Funkce paměti pro vypnutí: Retains settings after power interruption, with local time defaulting to 12 noon.
- Extendable Brackets: Adjustable length for various freshwater tank sizes (12-18 inches for this model).
- Vysoký index podání barev (CRI): Up to 89%, close to natural light, protecting eyes and fish.
- Dlouhá životnost: High-quality 2835 + 5050 model lamp beads with a lifespan of at least 50,000 hours.
- LCD displej: Clear display for real-time local time and program timers.
Image: Visual representation of key features: eye protection, soft light, and IP68 waterproof rating.
Technické specifikace
| Specifikace | Detail |
|---|---|
| Model | HG-957 |
| Moc | 20W |
| Application Tank Size | 12 ~ 18 palce |
| Velikost světla | 30 x 10 x 2.2 cm (11.8 x 3.9 x 0.87 palce) |
| Vstupní objemtage | AC100-240V |
| Výstupní objemtage | DC 15V |
| Množství LED | 40 PCS (20 White, 4 Blue, 4 Red, 2 Green, 10 RGB) |
| Index podání barev (CRI) | 89 |
| Lumeny | 927 |
| Teplota barev | 6500-10000K |
| Délka napájecího kabelu | 4.9 stop |
| Materiál | Hliníková slitina, Plast |
Image: Diagram detailing the light's model, input/output voltage, LED quantity, rendering index, lumens, color temperature, and power cord length.
Průvodce nastavením
- Rozbalit: Opatrně vyjměte všechny součásti z obalu.
- Připevněte držáky: Slide the extendable brackets onto both ends of the light unit.
- Obrysové světlo: Place the light unit on top of your aquarium, adjusting the brackets to fit the tank's width. Ensure the light is stable and centered.
- Připojte napájení: Connect the power adapter to the light unit, then plug the adapter into a suitable power outlet. Ensure the connection is secure.
- Počáteční zapnutí: The light will power on. The LCD display will show the current time and default settings.
Image: Diagram showing the dimensions of the light's mounting brackets.
Provozní režimy
The hygger Aquarium Programmable LED Light offers four distinct operating modes to suit various aquarium needs.
1. Výchozí režim
This mode simulates a natural sunrise to sunset cycle with a night effect. The brightness and time settings are pre-programmed and cannot be manually adjusted in this mode.
- Light Composition: All-optical + Blue light (color can change).
- Cyklus: Brightness gradually increases from sunrise, peaks during daylight, and dims to a moonlight effect before turning off.
- Default Schedule: All-optical period: 06:30-18:30, Blue light period: 18:00-23:30.
Image: Illustration of the Default Mode's light curve, showing sunrise, daylight, sunset, and moonlight phases.
2. Režim DIY
This mode allows for complete customization of the lighting schedule, suitable for planted tanks or specific aesthetic preferences.
- Light Composition: L1-L6: All-optical; L7-L8: Blue.
- Přizpůsobení: You can set 8 distinct time stages. For each stage, you can adjust the brightness (10 levels) and the start/end time.
- Poznámka: If fewer than 8 stages are desired, set the brightness of the unused stages na 00.
Image: Explanation of DIY Mode, highlighting its suitability for planted aquariums and customization options.
3. Gradient Mode
This mode cycles through various colors, providing a dynamic visual effect. The brightness and time settings are fixed in this mode.
- Barvy: Cycles through dark blue, green, purple, light blue, yellow, and red.
- Řízení: Brightness and time cannot be set manually.
Obrázek: Přamples of colors displayed in Cycle Mode (Red, Dark Blue, Green, Purple, Cyan, Yellow).
4. All-day All-optical Mode
This mode provides continuous full-spectrum lighting. While the color temperature of the RGB light can be fine-tuned, the brightness and time cannot be set.
- Typ světla: All-optical.
- Úpravy: Fine-tune RGB color temperature.
- Omezení: Brightness and time are not adjustable.
LCD Display and Operation
The light features an LCD display and four function keys for easy programming and control.
- Funkční klávesy: Mode Setting, Up, Down, Light Setting/Return Back.
- Úvodní obrazovka: Displays real-time local time (selectable 12-hour/24-hour format).
- Small Screens: Two program timers for setting day and night start/end times in various modes.
Obrázek: Detail view of the light's LCD display and control buttons, indicating local time and program timers.
Údržba
- Čištění: Jáamp beads are IP68 waterproof, allowing for easy cleaning and wiping. Ensure the light is unplugged before cleaning. Use a soft, damp cloth to wipe the light unit. Do not submerge the entire unit or the control panel.
- Péče o adaptér: The separable adapter can be replaced if damaged, preventing the need to replace the entire light.
- Odvod tepla: Hliníková slitina casing is designed for efficient heat dissipation. Ensure adequate airflow around the light to prevent overheating.
Image: Illustration demonstrating the waterproof capability of the light's lamp korálky.
Odstraňování problémů
- Světlo se nerozsvítí: Check if the power adapter is securely connected to both the light unit and the power outlet. Verify the power outlet is functional.
- Nesprávné zobrazení času: If the time resets or is incorrect after a power outage, manually reset the local time using the LCD display controls. The power-off memory function defaults the local time to 12 noon upon power restoration.
- Nastavení se neukládá: Ensure you are correctly saving your settings after making adjustments in DIY or other programmable modes. Refer to the LCD display operation section for detailed steps.
- Blikání světla: Check for loose connections. If flickering persists, contact customer support.
- Water Inside Control Panel: If water enters the control panel, immediately unplug the light and allow it to dry completely. Do not attempt to use it until fully dry. This component is not waterproof.
Záruka a podpora
For warranty information or technical support, please refer to the product packaging or contact hygger customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
You can visit the official hygger store for more information and support: hygger Official Store
