ROBOTIME Grand Prix Car MC401

1. Úvod

This instruction manual provides comprehensive guidance for assembling and maintaining your ROBOTIME Grand Prix Car MC401 1:16 Scale Wooden 3D Puzzle Model. This kit offers an engaging building experience, resulting in a detailed replica of a 1910s Grand Prix car. Please read all instructions carefully before beginning assembly.

Figure 1.1: Fully assembled ROBOTIME Grand Prix Car MC401 model.

2. Bezpečnostní informace

• This product contains small parts and is recommended for ages 14 and up. Keep out of reach of small children to prevent choking hazards.
• Exercise caution when detaching and handling wooden pieces, as some edges may be sharp.
• Do not use chemical agents or abrasive materials for cleaning. Use a clean, soft cloth.
• Avoid exposing the model to direct sunlight, extreme temperatures, or high humidity, which may cause warping or damage.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny:

• Laser-cut wooden sheets containing all model parts.
• Detailed instruction manual with step-by-step diagrams.
• Small piece of sandpaper for smoothing edges.
• Additional spare wooden pieces for fragile components.

Figure 3.1: The product box and some of the laser-cut wooden sheets.

4. Montážní návod

This model is designed for self-assembly without the need for glue. All parts interlock precisely. Follow the numbered steps in the manual provided in the kit.

4.1. Příprava

1. Carefully identify each wooden sheet. Parts are laser-cut and numbered for easy identification.
2. Gently press out the required pieces from the wooden sheets. If a piece is difficult to remove, use the provided sandpaper or a small tool to assist, being careful not to damage the part.
3. Use the sandpaper to smooth any rough edges or small nubs left from the laser cutting process.

4.2. Sestavení krok za krokem

Refer to the included instruction booklet for detailed diagrams and part numbers for each step. The diagrams illustrate how pieces fit together, often showing a 'printed side' and 'back side' for correct orientation.

Obrázek 4.1: Přample of assembly steps, showing how to detach and connect pieces.

• Follow the Instruction: Each step is clearly outlined with corresponding part numbers (e.g., A1, A2).
• Take Off the Puzzle Pieces: Detach parts as needed for the current step.
• Match with the Sockets: Align and insert tabs into corresponding slots. Ensure a snug fit without forcing, which could break delicate parts.
• Finished Perfectly: Proceed to the next step once the current section is securely assembled.

4.3. Videonávod k montáži

For visual assistance, an official assembly video is available. This video demonstrates the construction process and can be helpful for understanding complex steps.

5. Operating Instructions (Display and Features)

The ROBOTIME Grand Prix Car MC401 is a static display model with intricate details. While not designed for active play, it features several movable and detailed components:

• kola: The wheels are designed to rotate, allowing for dynamic display options.
• Volant: The steering wheel can be turned.
• Engine Details: The model features a detailed 8-cylinder V engine replica with integrated exhaust pipes.
• Interiér: A detailed gauge panel and ignition handle are visible in the cockpit.

Obrázek 5.1: Detailní view of the engine, exhaust pipes, and interior dashboard of the Grand Prix Car model.

Position your finished model on a stable, flat surface away from high traffic areas to prevent accidental damage.

6. Údržba

• Čištění: Dust the model regularly with a soft, dry brush or cloth. Avoid using water or cleaning solutions.
• Skladování: If storing the model, place it in a protective box to prevent dust accumulation and damage.
• Zacházení: Always handle the model with care, supporting it from the base to avoid stressing delicate parts.

7. Řešení problémů

• Rozbité kousky: The kit includes extra wooden pieces for common fragile parts. If a critical piece breaks and no spare is available, please contact customer service.
• Tight Fits: If pieces are too tight, gently sand the edges with the provided sandpaper until they fit without excessive force.
• Loose Fits: If pieces are too loose, a small amount of wood glue (not included) can be used to secure them, though this is generally not required for the interlocking design.
• Chybějící části: In the rare event of missing parts, refer to the customer support section for contact information.

8. Specifikace

Figure 8.1: Visual representation of the model's dimensions.

9. Podpora

For any questions, concerns, or to request replacement parts, please contact ROBOTIME customer service. Refer to the contact information provided on the product packaging or visit the official ROBOTIME webmísto.