Zavedení
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
Bezpečnostní informace
- Během instalace vždy používejte vhodné ochranné pomůcky, jako jsou rukavice a ochrana očí.
- Před použitím se ujistěte, že jsou všechny součásti bezpečně upevněny.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
Obsah balení
Váš balíček by měl obsahovat následující položky:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- Úderové desky
- Montážní šrouby
- Instalační šablona (pokud je součástí dodávky)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
Nastavení a instalace
Požadované nástroje:
- Šroubovák s křížovou hlavou
- Svinovací metr
- Tužka
- Drill (if new door preparation is needed)
- Wood Chisel (if new door preparation is needed)
Kroky instalace:
- Připravte dveře: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- Nainstalujte západku: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- Instalace protikusu: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- Testovací provoz: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
Návod k obsluze
Keyed Entry Knob:
- To Lock from Outside: Insert the key and turn it to lock the knob. Remove the key.
- To Unlock from Outside: Insert the key and turn it to unlock the knob.
- To Lock from Inside: Press or turn the button/thumbturn on the interior knob.
- To Unlock from Inside: Turn the interior knob or button/thumbturn.
Jednoválcový závorník:
- To Lock from Outside: Insert the key and turn it to extend the deadbolt. Remove the key.
- To Unlock from Outside: Insert the key and turn it to retract the deadbolt.
- To Lock from Inside: Turn the thumbturn on the interior side to extend the deadbolt.
- To Unlock from Inside: Turn the thumbturn on the interior side to retract the deadbolt.
Údržba
- Čištění: Clean the lockset regularly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- Mazání: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
- Utažení šroubů: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Key does not turn or is stiff. | Dirt in keyway, worn key, or misaligned cylinder. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Door does not close properly with lock engaged. | Misaligned strike plate or door frame issues. | Upravte polohu závory. Zkontrolujte rám dveří, zda není deformovaný nebo poškozený. |
| Knob/Deadbolt feels loose. | Uvolněné montážní šrouby. | Tighten the mounting screws evenly. Do not overtighten. |
Specifikace
- Typ produktu: Keyed Entry Knob and Single Cylinder Deadbolt
- Model: B36L1BD
- Materiál: Nerezová ocel, kov
- Dokončit: Saténová nerezová ocel
- Stupeň: 3 Grade (Residential)
- Ovládání dveří: Pravá ruka
- Adjustable Backset: 60 mm (2-3/8 palce) nebo 70 mm (2-3/4 palce)
- Rozsah tloušťky dveří: 1-3/8 palce (35 mm) až 1-3/4 palce (44 mm)
- Klínová drážka: KW1
- Keys Included: 4
- Rozměry produktu: Přibližně 3.3 x 12.4 x 9.8 palce (8.4 x 31.5 x 24.9 cm)
- Vnitřní/venkovní použití: Venkovní
Záruka a podpora
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.