Návod k obsluze odizolovací kleště JOKARI Original Super 4 Pro

1. Úvod

This manual provides detailed instructions for the safe and effective use of the JOKARI Original Super 4 Pro Wire Stripper. This ergonomic, automatic wire stripper is designed for stripping flexible and solid PVC insulated conductors with cross-sections ranging from 0.2 to 6.0 mm².

2. Bezpečnostní informace

Always observe the following safety precautions when using electrical tools:

• Používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí, abyste se chránili před poletujícími úlomky.
• Zajistěte, aby byla pracovní plocha dobře osvětlená a bez překážek.
• Never use the tool on live electrical circuits. Always disconnect power before working on wires.
• Inspect the tool before each use for any signs of damage. Do not use a damaged tool.
• Keep hands and fingers clear of the stripping blades during operation.
• Nástroj skladujte na suchém a bezpečném místě mimo dosah dětí.

3. Konec produktuview

The JOKARI Super 4 Pro Wire Stripper features an ergonomic design with a non-slip soft component on the handle for comfortable and secure grip. Key components include:

• Stripping Jaws: Automatically adjust to wire cross-sections.
• Length Stop: Adjustable for precise stripping lengths.
• Side Cutters: Integrated for cutting wires up to 2.5 mm².
• Vyměnitelné čepele: For extended tool life.

The tool is designed for efficiency and precision, ensuring clean strips without damaging the conductor.

4. Nastavení

The JOKARI Super 4 Pro Wire Stripper requires minimal setup before use.

4.1. Inspecting the Tool

Before first use and prior to each subsequent use, visually inspect the stripping jaws and side cutters for any damage, wear, or debris. Ensure the length stop mechanism moves freely.

4.2. Adjusting the Length Stop

The integrated length stop allows for consistent stripping lengths. To adjust:

1. Locate the yellow adjustable stop mechanism on the side of the tool.
2. Slide the stop to the desired stripping length, indicated by the markings in millimeters (5 to 15 mm).
3. Ensure the stop is securely positioned before stripping.

5. Návod k obsluze

The JOKARI Super 4 Pro features an automatic scanning system, eliminating the need for manual adjustment to the cable cross-section within its specified range.

5.1. Stripping Wires

1. Ensure the wire is de-energized.
2. Open the stripper handles fully.
3. Insert the end of the wire into the stripping jaws until it rests against the adjusted length stop.
4. Firmly squeeze the handles together. The tool will automatically grip the wire, cut the insulation, and pull it away, leaving the conductor exposed.
5. Release the handles to retrieve the stripped wire.

5.2. Using the Side Cutters

The JOKARI Super 4 Pro includes optimally positioned side cutters for cutting wires.

1. Locate the side cutters near the pivot point of the tool.
2. Insert the wire into the cutting edge.
3. Squeeze the handles firmly to cut the wire. These cutters are suitable for wires up to 2.5 mm².

6. Údržba

Proper maintenance ensures the longevity and performance of your JOKARI Super 4 Pro Wire Stripper.

6.1. Čištění

After use, wipe the tool clean with a dry cloth to remove any dust, insulation fragments, or debris. Avoid using harsh chemicals or solvents that could damage the tool's materials.

6.2. Výměna čepele

The stripping blades are interchangeable. If the stripping performance degrades or blades become dull, they can be replaced. Refer to the manufacturer's guidelines or contact customer support for information on obtaining replacement blades and the replacement procedure.

7. Řešení problémů

If you encounter issues with your wire stripper, consider the following:

• Incomplete Strip: Ensure the wire is fully inserted against the length stop. Check if the blades are dull or damaged and require replacement.
• Damaged Conductor: Verify that the wire cross-section is within the tool's specified range (0.2 - 6.0 mm²). If the conductor is consistently nicked, the blades may be misaligned or damaged.
• Difficulty Squeezing Handles: Check for any obstructions in the stripping mechanism. Clean the tool thoroughly.

For persistent issues, contact JOKARI customer support.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please refer to the official JOKARI webnebo se obraťte na autorizovaného prodejce. Uschovejte si účtenku jako doklad o koupi.