RCWare CaDA C81008W Micro UZI Building Block Set

Zavedení

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your RCWare CaDA C81008W Micro UZI building block set. Designed for enthusiasts aged 8 and older, this set allows you to construct a detailed replica with a functional shooting mechanism. Please read this manual carefully before beginning assembly to ensure a smooth and enjoyable building experience.

Image: The fully assembled CaDA C81008W Micro UZI building block model, showcasing its intricate design and dark grey color.

Bezpečnostní informace

VAROVÁNÍ:

• This set contains small parts and is not suitable for children under 3 years of age due to choking hazards.
• Do not aim the projectile launcher at eyes or face.
• Use only the projectiles provided with this set. Do not modify projectiles or the launcher.
• Adult supervision is recommended during assembly and play, especially for younger users.

Obsah balení

Please verify that all components are present before starting assembly:

• 1 x "Micro UZI" Building Block Set (359 parts)
• 6 x projektily
• 1 x Detailed Assembly Manual

Image: The product packaging for the CaDA C81008W Micro UZI set, alongside the assembled model and the six red projectiles included in the package.

Nastavení (montáž)

The CaDA C81008W Micro UZI set comes with a detailed assembly manual. Follow the step-by-step instructions provided in the included manual for proper construction.

1. Rozbalte komponenty: Carefully open the box and sort the building blocks by color or type as suggested in the assembly manual.
2. Postupujte podle pokynů: Refer to the included detailed assembly manual. Each step is illustrated to guide you through the building process.
3. Zabezpečená připojení: Zajistěte všechny třamping building blocks are firmly connected to achieve strong holding power and structural integrity.
4. Ověřte funkčnost: Once assembled, test the moving parts and the shooting mechanism to ensure everything operates correctly before proceeding to play.

If you encounter any difficulties during assembly, double-check the previous steps in the manual or refer to the troubleshooting section.

Provozní

Your CaDA C81008W Micro UZI model features a functional shooting mechanism.

1. Loading Projectiles: Insert one of the six provided projectiles into the designated loading slot or barrel as indicated in the assembly manual. Ensure it is seated correctly.
2. Preparing to Fire: Depending on the design, you may need to pull back a charging handle or prime a spring mechanism. Refer to your assembly manual for the specific firing procedure.
3. Střelba: Press the trigger mechanism to launch the projectile. Remember to always aim away from people, animals, and fragile objects.
4. Opětovné načítání: After firing, repeat the loading process for the next projectile.

Důležitá poznámka:

• This toy is designed for manual operation. No batteries or electronic components are required.
• The shooting function is intended for recreational play and should always be used responsibly.

Údržba

Proper care will extend the life and enjoyment of your building block set.

• Čištění: Chcete-li stavební bloky vyčistit, otřete jeamp cloth. For stubborn dirt, a mild soap solution can be used, followed by thorough rinsing and air drying. Do not submerge the entire model in water.
• Skladování: Store the assembled model or disassembled blocks in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.
• Zacházení: S modelem zacházejte opatrně, abyste zabránili náhodnému rozebrání nebo poškození choulostivých částí.
• Projectile Care: Keep projectiles clean and free of debris to ensure smooth firing.

Odstraňování problémů

If you encounter issues with your CaDA C81008W set, consider the following:

• Chybějící části: If you believe parts are missing, carefully re-check the packaging and the area where you unpacked the set. If parts are genuinely missing, contact the manufacturer or seller for assistance.
• Potíže s montáží: Review the assembly manual step-by-step. Ensure all blocks are oriented correctly and firmly pressed together. Sometimes, a small error in an earlier step can affect later assembly.
• Shooting Mechanism Not Working: Verify that the projectile is loaded correctly and that the firing mechanism is fully primed. Check for any obstructions in the barrel or moving parts. Ensure all parts of the firing mechanism are assembled according to the manual.
• Uvolněná připojení: If parts feel loose, gently press them together until they click or feel secure. The clamping building blocks are designed for strong holding power.

Specifikace

Záruka a podpora

For warranty information or technical support regarding your RCWare CaDA C81008W Micro UZI building block set, please refer to the contact information provided on the product packaging or the official website of the manufacturer, CaDA, or the distributor, RCWare.

Doporučuje se uschovat si doklad o koupi pro případné reklamace.