1. Konec produktuview
The SafeWaze SW417 Tool Tether is a critical safety device designed to prevent tools from falling when working at height. This 24-inch (61 cm) tether is engineered to securely connect tools weighing up to 5 lbs (2.27 kg) to an anchor point, such as a worker's harness, tool belt, or a fixed structure. It serves as an essential component in a comprehensive fall prevention strategy for tools, enhancing safety in various industrial, construction, solar, wind, tower, energy, and general safety markets.
Image: The SafeWaze SW417 Tool Tether, featuring a bright neon green webbing strap and two robust silver snap hooks at each end. The webbing includes a label with product specifications.
2. Bezpečnostní informace
Adherence to safety guidelines is paramount when using the SW417 Tool Tether. Failure to follow these instructions may result in serious injury or property damage.
- Kontrola před použitím: Always perform a thorough visual inspection of the tether before each use. Check the webbing for cuts, abrasions, fraying, discoloration, or chemical damage. Inspect the snap hooks for deformation, cracks, corrosion, or proper gate operation.
- Nosnost: Do not exceed the tether's maximum load capacity of 5 lbs (2.27 kg). Overloading can lead to tether failure.
- Účel: This tether is designed for tool retention only. It is ne intended for personal fall arrest, rescue, or lifting applications.
- Kompatibilita: Ensure the tether is compatible with the tools and anchor points being used.
- Environmentální faktory: Avoid exposure to extreme temperatures, sharp edges, open flames, or corrosive chemicals, which can degrade the tether's integrity.
- Poškozené vybavení: Any tether showing signs of damage, excessive wear, or that has been subjected to a significant impact (e.g., stopping a falling tool) must be immediately removed from service and replaced. Do not attempt to repair damaged equipment.
- Výcvik: Users must be trained in proper fall protection practices and the safe use of tool tethers.
3. Nastavení a instalace
Proper attachment of the tool tether is crucial for effective fall prevention.
- Upevnění nástroje: Select a tool that weighs 5 lbs (2.27 kg) or less. Attach one of the snap hooks of the SW417 Tool Tether to a secure attachment point on the tool. This could be a dedicated lanyard hole, a closed handle, or a robust part of the tool designed for tethering. Ensure the snap hook gate is fully closed and locked.
- Anchor Point Attachment: Attach the other snap hook of the tether to a suitable anchor point. Common anchor points include a D-ring on a fall protection harness, a dedicated tool lanyard attachment point on a tool belt, or a secure fixed structure. Ensure the snap hook gate is fully closed and locked.
- Ověřte připojení: Before beginning work, gently tug on both ends of the tether to confirm that both connections are secure and properly engaged.
- Umístění: Position the tether so that it does not interfere with your movement or create a snagging hazard. Avoid routing the tether over sharp edges.
4. Návod k obsluze
Once the SW417 Tool Tether is properly installed, it facilitates safe tool handling at height.
- Použití nástroje: Use the tethered tool as intended. The tether provides a safety net, preventing the tool from free-falling if accidentally dropped.
- Maintain Awareness: Be aware of the tether's position during work to prevent it from becoming tangled with other equipment or creating a tripping hazard.
- Tool Transfer: When transferring tools between workers, ensure the tether remains attached to one person or a secure anchor point until the transfer is complete and the tool is safely tethered by the receiving party.
- Avoid Slack: While some slack is necessary for tool manipulation, avoid excessive slack that could allow a tool to gain significant momentum before being caught, increasing impact force.
5. Údržba
Proper maintenance extends the life and ensures the reliability of your tool tether.
- Čištění: Clean the tether regularly with a mild soap and water solution. Rinse thoroughly with clean water.
- Sušení: Allow the tether to air dry completely in a clean, well-ventilated area, away from direct sunlight, heat sources, or open flames. Do not use forced heat to dry.
- Skladování: Store the tether in a cool, dry, clean environment, free from chemicals, corrosive vapors, extreme temperatures, and direct sunlight. Protect it from mechanical damage, sharp objects, and pests.
- Pravidelná prohlídka: In addition to pre-use inspections, conduct more detailed periodic inspections as per your company's safety protocols or at least every six months, documented by a competent person.
6. Řešení problémů
This section addresses common issues you might encounter with the SW417 Tool Tether.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Tether shows signs of damage (fraying, cuts, corrosion). | Wear and tear, exposure to sharp objects or chemicals, improper storage. | Immediately remove the tether from service. Do not attempt to repair. Replace with a new, compliant tether. |
| Tool weight exceeds tether capacity. | Incorrect tether selection for the tool. | Do not use this tether. Select a tool tether with an appropriate weight capacity for the tool being used. |
| Snap hook does not close or lock properly. | Debris in mechanism, damage to spring or gate. | Clean the mechanism. If still faulty or damaged, remove the tether from service and replace. |
| Tether interferes with tool operation or worker movement. | Improper routing, tether length unsuitable for task. | Re-route the tether to minimize interference. If persistent, consider if a different tether length or type is more suitable for the specific task. |
7. Specifikace
- Model: SW417
- Značka: SafeWaze
- Číslo dílu: SW417
- Tether Length: 24 palce (přibližně 61 cm)
- Maximální nosnost: 5 lb (přibližně 2.27 kg)
- Konektory: Two snap hooks
- Materiál: Odolný webbing and metal hardware
8. Záruka a podpora
For specific warranty information regarding your SafeWaze SW417 Tool Tether, please refer to the documentation provided with your purchase or visit the official SafeWaze website. For technical support, product inquiries, or assistance with any issues not covered in this manual, please contact SafeWaze customer service directly. Retain your proof of purchase for any warranty claims.
Výrobce: SafeWaze
Note: Product specifications and design are subject to change without notice. Always refer to the latest product documentation and safety standards.
