1. Úvod
This manual provides essential information for the safe and effective use, maintenance, and care of your Hyper Tough 3-Piece 10mm Socket Set. This set includes three 10mm sockets with different drive sizes: 1/4-inch, 3/8-inch, and 1/2-inch. These sockets are designed for fastening and loosening 10mm hexagonal fasteners when used with compatible drive tools such as ratchets, breaker bars, or torque wrenches. Constructed from durable Chrome Vanadium steel, these sockets are built for reliability and longevity.
2. Komponenty produktu
The Hyper Tough 3-Piece 10mm Socket Set includes the following components:
- One (1) 10mm Socket, 1/4-inch Drive
- One (1) 10mm Socket, 3/8-inch Drive
- One (1) 10mm Socket, 1/2-inch Drive
Image 1: The Hyper Tough 3-Piece 10mm Socket Set, showing all three sockets. From left to right: 1/2-inch drive, 3/8-inch drive, and 1/4-inch drive, each marked '10mm' and 'Chrome Vanadium'.
Image 2: The Hyper Tough 3-Piece 10mm Socket Set in its retail packaging, highlighting the '3-Piece 10MM SOCKET SET' and '5 Year Limited Warranty'.
3. Bezpečnostní informace
Always observe the following safety precautions when using hand tools:
- Používejte vhodné osobní ochranné prostředky (OOP), such as safety glasses, to protect against flying debris.
- Inspect tools before each use. Do not use damaged or worn sockets or drive tools.
- Select the correct size socket for the fastener to prevent rounding the fastener head or damaging the socket.
- Ensure the socket is fully seated on the fastener and the drive tool before applying force.
- Do not use cheater bars or extensions that are not designed for the drive tool, as this can overload the tool and cause breakage.
- Apply steady, controlled force. Avoid sudden jerking motions.
- Udržujte ruce a prsty čisté of pinch points and moving parts.
- Store tools properly in a dry, clean place away from children.
4. Nastavení a použití
Follow these steps for proper setup and usage of your socket set:
- Vyberte správnou zásuvku: Identify the 10mm fastener you need to work with. Choose the appropriate drive size (1/4-inch, 3/8-inch, or 1/2-inch) based on the drive tool you intend to use.
- Připojení k pohonnému nástroji: Firmly push the square drive end of the socket onto the corresponding square drive of your ratchet, breaker bar, or extension. Ensure it clicks securely into place.
- Pozice na upevňovacím prvku: Place the hexagonal opening of the socket squarely over the head of the 10mm fastener. Ensure the socket is fully engaged and not at an angle.
- Použij sílu: For loosening, turn the drive tool counter-clockwise. For tightening, turn clockwise. Apply smooth, consistent pressure. Avoid excessive force that could damage the fastener or tool.
Image 3: The three 10mm sockets viewed from the drive end, showing the square openings for attachment to drive tools.
Image 4: A Hyper Tough 10mm socket attached to a ratchet, demonstrating typical usage on a fastener.
5. Údržba
Proper maintenance ensures the longevity and performance of your socket set:
- Čištění: After each use, wipe down the sockets with a clean, dry cloth to remove dirt, grease, and debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Mazání: While not typically required for sockets themselves, ensure your drive tools (ratchets) are properly lubricated according to their respective manuals.
- Skladování: Store sockets in a dry environment to prevent rust. A socket rail, tray, or tool box compartment is recommended to keep them organized and protected from damage.
- Inspekce: Periodically inspect sockets for signs of wear, cracks, or deformation. Discard any damaged sockets immediately to prevent injury or damage to fasteners.
6. Řešení problémů
If you encounter issues while using your socket set, consider the following:
- Socket slips on fastener: Ensure the socket is the correct size (10mm) and fully seated. The fastener head may be stripped or rounded; consider using a specialized fastener extractor if necessary.
- Socket will not attach to drive tool: Check that the drive size of the socket matches the drive size of your tool (1/4", 3/8", or 1/2"). Ensure there is no debris in the drive opening.
- Socket feels loose on drive tool: The drive tool's retention mechanism (e.g., ball detent) may be worn, or the socket's drive opening may be damaged. Inspect both components.
- Fastener is stuck: Do not force it. Apply penetrating oil if appropriate for the application. For very tight fasteners, a breaker bar may provide more leverage than a ratchet.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Hyper odolný |
| Materiál | Chromvanadiová ocel |
| Typ dokončení | Leštěný |
| Počet kusů | 3 |
| Velikosti zásuvek | 10mm (all three sockets) |
| Velikosti disku | 1/4-inch, 3/8-inch, 1/2-inch |
| Hmotnost položky | 3.2 unce |
| UPC | 889526209285 |
8. Záruka a podpora
This Hyper Tough 3-Piece 10mm Socket Set is backed by a 5letá omezená záruka. For specific warranty details, claims, or technical support, please refer to the warranty information provided with your product packaging or contact Hyper Tough customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official Hyper Tough webwebu nebo kontaktujte jejich zákaznickou linku podpory.
