Fleece Performance FPE-ALO All Lights On Module

1. Konec produktuview

The Fleece Performance FPE-ALO All Lights On module is designed to enhance nighttime driving visibility by allowing your vehicle's high beams, low beams, and fog lights to operate simultaneously when the high beams are activated. This provides maximum illumination of the road ahead. When high beams are not engaged, your low beams and fog lights will function as standard.

This module is engineered for quick and straightforward installation, typically taking less than 10 minutes.

Kompatibilní vozidla:

• 2015 - 2019 Chevrolet Colorado and GMC Canyon
• 2007.5 - 2019 Chevrolet Silverado and GMC Sierra 1500/2500HD/3500HD
• 2007 - 2019 Chevrolet Tahoe, Suburban
• 2007 - 2019 GMC Yukon and Yukon XL
• 2007 - 2014 Cadillac Escalade
• 2007 - 2013 Chevrolet Avalanche
• 2008 - 2017 Buick Enclave
• 2009 - 2017 Chevrolet Traverse
• 2010 - 2016 GMC Terrain
• 2007 - 2016 GMC Acadia
• 2007 - 2010 Saturn Outlook
• 2010 - 2019 GM Equinox

Note: Compatibility is for vehicles equipped with factory-installed fog lights.

2. Nastavení a instalace

The FPE-ALO module is designed for a simple plug-and-play installation. For detailed, vehicle-specific instructions, it is highly recommended to scan the QR code provided on the product packaging or visit the official Fleece Performance website. Always refer to the instructions specific to your vehicle's make, model, and year, as wiring and procedures may vary slightly.

Kroky instalace (obecné):

1. Locate the appropriate wiring harness in your vehicle as specified by the installation guide for your model.
2. Carefully disconnect the existing connector.
3. Connect the FPE-ALO module inline with the harness, ensuring a secure fit. The module is designed for a one-time snap connection.
4. Test the functionality of your lights before fully reassembling any removed panels.

Důležité: The snap-on wire connector is designed for a single, secure connection. Ensure all checks are complete before making the final connection. If uncertain, contact Fleece Performance support.

3. Návod k obsluze

Once the Fleece Performance FPE-ALO module is correctly installed, its operation is integrated with your vehicle's existing headlight controls:

• When your vehicle's high beams are activated, the FPE-ALO module will automatically engage your low beams and fog lights to remain on simultaneously with the high beams. This provides enhanced forward visibility.
• When your high beams are deactivated, the module will disengage, and your low beams and fog lights will return to their standard operational mode.

Note: Some vehicle instrument panel indicators for fog lights may turn off when high beams are active, even though the fog lights remain illuminated. This is a characteristic of the vehicle's electrical system and not an indication of module malfunction.

4. Údržba

The Fleece Performance FPE-ALO module is a sealed electronic device and requires no routine maintenance. It contains no user-serviceable parts. Do not attempt to open or modify the module, as this may void any applicable warranty and could damage the device or your vehicle's electrical system.

Keep the module free from excessive moisture, dirt, and extreme temperatures to ensure optimal performance and longevity.

5. Řešení problémů

If you experience issues with your FPE-ALO module, consider the following troubleshooting steps:

• Světla se neaktivují:
  • Ensure the module is securely connected to the vehicle's wiring harness. A loose connection can prevent proper operation.
  • Verify that your vehicle is listed as compatible with the FPE-ALO module and that it has factory-installed fog lights.
  • Check your vehicle's fuses related to headlights and fog lights.
• Přerušovaný provoz:
  • Inspect the wiring connections for any signs of damage or corrosion.
  • Ensure the module itself is not exposed to excessive heat or moisture.

If troubleshooting steps do not resolve the issue, please contact Fleece Performance Engineering customer support for further assistance. Do not attempt to repair the module yourself.

6. Specifikace

7. Záruka a podpora

Specific warranty details for the Fleece Performance FPE-ALO module are not provided within this document. For information regarding product warranty, returns, or technical support, please refer to the official Fleece Performance Engineering webwebu nebo se přímo obraťte na jejich zákaznický servis.

Doporučuje se uschovat si doklad o koupi pro případné reklamace.