1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Obrázek 1.1: Konecview of the LE Solar Outdoor Motion Sensor Light WL4000.
2. Vlastnosti produktu
- Široký úhel osvětlení: Features 3 adjustable heads providing 270° wide lighting coverage.
- Vysoký jas: Delivers 1000 lumens of 6500K daylight illumination.
- Efektivní solární nabíjení: Converts sunlight into electricity, charging during the day for night operation.
- PIR Motion Sensor: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
- Automatický provoz: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
- Odolné a odolné vůči povětrnostním vlivům: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
- Snadná instalace: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.
Image 2.1: Product dimensions and adjustable light heads.
Image 2.2: The 270-degree wide lighting angle.
Obrázek 2.3: Dosah a úhel detekce pohybového senzoru.
3. Obsah balení
- LE Solar Outdoor Motion Sensor Light (WL4000)
- Montážní materiál (šrouby a hmoždinky do zdi)
- Uživatelská příručka
4. Nastavení a instalace
Follow these steps for proper installation of your solar light:
- Vyberte umístění: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
- Nainstalujte Lamp Držák: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
- Aktivujte světlo: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
- Zavěste světlo: Carefully hang the solar light unit onto the installed lamp držák.
- Nastavení světelných hlav: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.
Image 4.1: Step-by-step installation process.
Image 4.2: Fixing the lamp držák se šrouby.
Image 4.3: Activating the light using the mode switch.
Image 4.4: Hanging the light onto the lamp držák.
5. Návod k obsluze
The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.
- Denní provoz: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
- Noční provoz: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
- Automatické vypnutí: The light will automatically turn off approximately 20 seconds after no further motion is detected.
Image 5.1: Solar charging and motion-activated lighting cycle.
6. Údržba
To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:
- Vyčistěte solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
- Jasné překážky: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
- Kontrola poškození: Periodically check the light for any physical damage, loose connections, or signs of wear.
- Odolnost vůči počasí: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.
Image 6.1: IP65 waterproof, heat, and frost resistance features.
7. Řešení problémů
If your solar light is not functioning as expected, consider the following common issues and solutions:
- Světlo se v noci nerozsvítí:
- Ujistěte se, že je vypínač v poloze ON.
- Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
- Check if the solar panel is dirty or obstructed. Clean it thoroughly.
- Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
- Light stays on for a short period or is dim:
- Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
- The battery may not be fully charged. Ensure optimal sun exposure.
- Motion sensor is not detecting:
- Ujistěte se, že snímač není ucpaný.
- Verify the light is installed within the recommended height range (1.5-3.5 meters).
- Test the sensor by walking within its detection range.
8. Specifikace
| Specifikace | Detail |
|---|---|
| Značka | Lepro |
| Název modelu | WL4000 |
| Číslo dílu | 640003-DW |
| Typ světelného zdroje | LED |
| Jas | 1000 XNUMX lumenů |
| Teplota barev | 6500K denní světlo bílá |
| Number of Light Heads | 3 |
| Úhel osvětlení | 270° |
| Vzdálenost detekce pohybového senzoru | 16–26 stopy (5–8 m) |
| Úhel detekce pohybového senzoru | 120° |
| Úroveň odolnosti proti vodě | IP65 Vodotěsný |
| Zdroj napájení | Solární napájení |
| Baterie | 1 lithium-iontová baterie (součástí balení) |
| Materiál | ABS+GPPS |
| Rozměry produktu | 11.1 cm D x 4.65 cm Š x 5.87 cm V |
| Hmotnost položky | 14.8 unce |
9. Záruka a podpora
For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.
