Outsunny 845-233WT

Outsunny 20' x 10' x 7' Walk-in Tunnel Greenhouse

Model: 845-233WT

1. Úvod a konecview

The Outsunny 20' x 10' x 7' Walk-in Tunnel Greenhouse (Model 845-233WT) is designed to provide a protected and controlled environment for cultivating plants. This manual offers comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your greenhouse to ensure its proper use and extended lifespan. This greenhouse features a spacious walk-in design, a durable galvanized steel frame, a tough PE plastic cover, a zippered roll-up door, and eight roll-up mesh windows for optimal ventilation.

Outsunny 20x10x7 Walk-in Tunnel Greenhouse in a garden setting

Image 1.1: The Outsunny Walk-in Tunnel Greenhouse installed in a garden.

2. Bezpečnostní informace

Please read and understand all safety warnings and instructions before assembling or operating this greenhouse. Failure to follow these instructions may result in injury or damage to the product.

  • Always assemble the greenhouse with at least two people.
  • Do not attempt to assemble or disassemble the greenhouse during strong winds, heavy rain, or snow.
  • Ensure the greenhouse is securely anchored to the ground using the provided screw stakes, rods, and by burying the overlong cover edges.
  • Take down the structure before snow storms, strong wind, and heavy rain to prevent damage.
  • Udržujte děti a domácí zvířata mimo oblast montáže.
  • Varování podle návrhu 65: Tento výrobek vás může vystavit chemikáliím včetně olova, o kterém je ve státě Kalifornie známo, že způsobuje rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • Komponenty rámů z pozinkované oceli (různé trubky a spojky)
  • PE Plastic Cover (White)
  • Tether Balls
  • Double-Side Tape
  • Screw Stakes (4)
  • Tyče (4)
  • Guy Ropes
  • Spiral Ground Stakes
  • Montážní materiál (šrouby, matice atd.)
Various components of the greenhouse including overlong cover, strap buckles, bungee cords, spiral ground stakes, and guy ropes

Image 3.1: Key components for assembly and anchoring.

4. Pokyny k instalaci a montáži

Pro správnou montáž pečlivě dodržujte tyto kroky. Doporučuje se, aby tento proces prováděly alespoň dvě osoby.

  1. Připravte stránky: Vyberte si pro skleník rovnou a dobře odvodněnou plochu. Odstraňte veškeré nečistoty nebo ostré předměty.
  2. Sestavte rám: Connect the galvanized steel pipes according to the diagram provided in your separate assembly guide. Ensure all connections are secure. The frame includes 4 slant bracing tubes, a front cross bar, and middle reinforced tubes for enhanced stability.
  3. Install the PE Cover: Carefully drape the PE plastic cover over the assembled frame. Ensure it is centered and evenly distributed. The cover is designed to protect plants while allowing nourishing sunlight to pass through.
  4. Zajistěte kryt: Attach the cover to the frame using the included tether balls and double-side tape. Ensure the cover is taut to prevent water pooling.
  5. Ukotvení skleníku: The overlong edges of the cover should be deeply buried in the soil (approximately 30cm/11.75 inches) to provide a secure base. Additionally, use the 4 screw stakes and 4 rods to firmly anchor the greenhouse to the ground. Utilize the guy ropes and spiral ground stakes for extra stability, especially in areas prone to wind.
Diagram showing how to bury the extended edge of the greenhouse cover and secure it with ground nails and ropes

Image 4.1: Proper anchoring of the greenhouse cover by burying the extended edge and using ground stakes.

A person tending to plants inside the Outsunny greenhouse, demonstrating the walk-in design

Image 4.2: The spacious interior of the greenhouse allows for comfortable plant care.

Video 4.1: Overview of the Outsunny Walk-in Tunnel Greenhouse, showcasing its features and design. This video is provided by the seller, Aosom Direct.

5. Návod k obsluze

Proper operation ensures the best growing conditions for your plants.

  • Using the Roll-Up Zippered Door: The large zippered roll-up door provides easy access to the interior. Unzip the door and roll it up, securing it at the top to keep it open. This allows for easy entry, exit, and movement of equipment.
  • Utilizing Roll-Up Mesh Windows: The greenhouse features eight roll-up windows with netting. These windows are crucial for cross-ventilation and climate control. Roll them up to allow air circulation and prevent overheating, while the netting keeps birds and larger insects out.
  • Ovládání klimatu: Monitor the internal temperature and humidity. Adjust the number of open windows and the door position to maintain optimal conditions for your specific plants.
Close-up images showing the roll-up mesh window, roll-up zippered door, double-sided tape, and tetherball for securing the cover

Image 5.1: Details of the roll-up mesh window and zippered door mechanisms.

Image highlighting the large roll-up door of the tunnel greenhouse

Image 5.2: The large roll-up door provides convenient access.

Image showing mesh windows on the greenhouse, designed to increase ventilation and keep pests out

Image 5.3: Mesh windows for ventilation and pest control.

6. Údržba

Pravidelná údržba prodlouží životnost vašeho skleníku.

  • Čištění krytu: Periodically clean the PE plastic cover with mild soap and water to ensure maximum light transmission. Avoid abrasive cleaners or brushes that could damage the material.
  • Kontrola rámu: Regularly check the galvanized steel frame for any signs of rust, corrosion, or loose connections. Tighten bolts as needed.
  • Kontrola ukotvení: Inspect the ground anchors and buried cover edges periodically, especially after strong winds, to ensure the greenhouse remains securely fastened.
  • Péče o zip: Handle the zippers gently. If they become stiff, apply a silicone-based lubricant to ensure smooth operation. Avoid forcing stuck zippers.
  • Připravenost na počasí: As noted in safety, remove the cover during heavy snow, strong winds, or heavy rain to prevent structural damage.
Diagram showing the selected materials: tear-proof, heat preservation, UV protection, and bird-proof PE cover, galvanized metal frame, and slant supporting tube

Image 6.1: The PE cover offers tear-proof, heat preservation, UV protection, and bird-proof qualities.

Close-up of reinforced galvanized steel tubing with 24mm diameter and 0.5mm thickness

Image 6.2: The galvanized steel frame provides stability and strength.

7. Řešení problémů

V této části naleznete běžné problémy a jejich řešení.

  • Problem: Greenhouse instability or movement in wind.
    Řešení: Ensure all frame connections are tight. Verify that the overlong cover edges are deeply buried and that all screw stakes, rods, guy ropes, and spiral ground stakes are properly installed and secured. Consider adding additional weight to the base if in a very windy area.
  • Problem: Excessive heat buildup inside the greenhouse.
    Řešení: Open the roll-up mesh windows and the zippered door to increase air circulation. Consider adding a shade cloth over the top during peak summer months if temperatures remain too high.
  • Problem: Zippers are difficult to operate or have broken.
    Řešení: Apply a silicone-based lubricant to the zipper teeth to improve movement. Avoid forcing zippers. If a zipper is broken, it may require repair or replacement of the cover.
  • Problem: Water pooling on the roof of the greenhouse.
    Řešení: Ensure the PE cover is installed tautly and evenly over the frame. Check for any sagging areas and adjust the cover tension if possible. Clear any debris (leaves, branches) that may accumulate on the roof.

8. Specifikace

FunkceDetail
Číslo modelu845-233 WT
Značkaslunný
Rozměry (D x Š x V)234.3 cm x 118.1 cm x 82.7 cm (20' x 10' x 7 cm)
Hmotnost položky67 libry
Materiál rámuLegovaná ocel (pozinkovaná)
Materiál krytuPolyetylen (PE)
Počet dveří1 (Zippered Roll-Up)
Počet větracích otvorů8 (Roll-Up Mesh Windows)
Vnitřní/venkovní použitíVenkovní
Speciální funkceWalk-in Design
Diagram showing the dimensions of the Outsunny tunnel greenhouse: 234.25 inches long, 118 inches wide, and 82.75 inches high

Image 8.1: Detailed dimensions of the greenhouse structure.

9. Záruka a podpora

This product is backed by a 30-day easy returns policy. For any questions, missing parts, or support needs, please contact Outsunny customer service or the seller, Aosom Direct. Keep your purchase receipt for warranty claims.

Kontaktní údaje:

  • Seller: Aosom Direct
  • Customer Support: Refer to your purchase documentation for specific contact details.

Související dokumenty - 845-233 WT

Předview Návod k montáži bezbariérového skleníku Outsunny 845-233
Komplexní návod na montáž skleníku Outsunny 845-233 s podrobným popisem přípravy místa, upevnění součástí a základních postupů zajištění stability.
Předview Montážní a uživatelská příručka skleníku Outsunny
Komplexní návod k montáži a používání velkého tunelového skleníku Outsunny 4.5 m x 2 m. Obsahuje seznam dílů, hardware, podrobné pokyny k montáži a důležité informace o použití.
Předview Návod k montáži bezbariérového skleníku Outsunny 845-592V02
Podrobný návod k montáži skleníku Outsunny 845-592V02. Zahrnuje seznam dílů, postup montáže a kontaktní informace. Odhadovaná doba montáže pro 2 a více osob je 2 hodiny. Chraňte své rostliny touto odolnou zahradní konstrukcí.
Předview Návod k montáži venkovního skleníku Outsunny 845-302
Podrobný návod k montáži venkovního skleníku Outsunny 845-302, včetně seznamu dílů a podrobných pokynů k montáži.
Předview Tunelové skleníky Outsunny 845-232V00: Návod k montáži a uživatelská příručka
Podrobný návod k montáži tunelového skleníku Outsunny 845-232V00. Obsahuje seznam dílů, hardware, postup montáže krok za krokem a kontaktní informace na zákaznickou podporu.
Předview Návod na montáž mini tunelového skleníku Outsunny
Stručný návod k montáži mini tunelového skleníku Outsunny 13' x 3.3' x 2.6' s PE krytem, ​​ocelovým rámem a dvířky na zip. Předpokládaná doba montáže 1 hodina.