1. Konec produktuview
The Amazon Basics USB-A to Lightning Cable is designed for charging and syncing Apple devices. This MFi-certified cable ensures compatibility and reliable performance with a wide range of Apple products. Its double-braided nylon exterior provides enhanced durability and resistance to wear.
Obrázek 1: Přesview of the Amazon Basics USB-A to Lightning Cable, highlighting its features.
Klíčové vlastnosti:
- Certifikace MFi: Ensures full compatibility and safe charging with Apple devices.
- Odolná konstrukce: Double-braided nylon exterior and reinforced connectors for a 10,000+ bend lifespan.
- Rychlé nabíjení: Podporuje až 2.4 amps for efficient power delivery.
- Vysokorychlostní přenos dat: Capable of data transfer speeds up to 480 Mbps.
- Univerzální kompatibilita: Works with various iPhone, iPad, and iPod models.
2. Pokyny k nastavení
This section guides you through the initial setup of your Amazon Basics USB-A to Lightning Cable.
2.1 Unpacking the Cable
Carefully remove the cable from its packaging. Inspect the cable and connectors for any visible damage. If any damage is present, do not use the cable and contact customer support.
2.2 Připojení pro nabíjení
- Locate a compatible USB-A power adapter (not included) or a USB-A port on a computer.
- Insert the USB-A end of the cable into the USB-A port of the power adapter or computer.
- Insert the Lightning connector end of the cable into the charging port of your Apple device (iPhone, iPad, or iPod).
- Ujistěte se, že jsou obě připojení bezpečná. Vaše zařízení by mělo indikovat, že se nabíjí.
Figure 2: Connecting the Lightning end to an Apple device.
Figure 3: A secure connection of the Lightning connector.
3. Návod k obsluze
The Amazon Basics USB-A to Lightning Cable supports both charging and data transfer functionalities.
3.1 Nabíjení vašeho zařízení
Connect the cable as described in Section 2.2. For optimal charging speed, use a power adapter that supports 2.4 amps or higher. Charging times may vary depending on the power adapter used and the device's battery level.
Figure 4: Illustrates charging times with different power adapters.
3.2 Přenos dat
To transfer data between your Apple device and a computer:
- Připojte konec USB-A kabelu k portu USB-A na vašem počítači.
- Connect the Lightning end of the cable to your Apple device.
- Your computer should recognize the device. Follow the on-screen prompts on your computer and device to authorize the connection and initiate data transfer (e.g., using iTunes or Finder).
Figure 5: Data transfer connection between an Apple device and a laptop.
4. Péče a údržba
Proper care extends the lifespan of your cable.
- Čištění: K čištění kabelu a konektorů použijte měkký, suchý hadřík. Nepoužívejte tekutiny ani abrazivní čisticí prostředky.
- Skladování: Kabel skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Zabraňte silnému svíjení nebo ohýbání kabelu v ostrých úhlech.
- Zacházení: Always grasp the connector head when plugging or unplugging the cable. Avoid pulling directly on the cable itself to prevent damage to the internal wires.
- Inspekce: Periodically inspect the cable for any signs of wear, fraying, or damage, especially near the connectors.
Figure 6: Demonstrating proper handling to avoid excessive bending.
5. Řešení problémů
If you encounter issues with your cable, refer to the following common solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nenabíjí | Loose connection, faulty power adapter, dirty port, or incompatible device. |
|
| Pomalé nabíjení | Low-power adapter, background apps, or damaged cable. |
|
| Device not recognized for data transfer | Loose connection, computer port issue, or device authorization pending. |
|
| "Accessory not supported" message | Dirty Lightning port, or rare software glitch. |
|
If the problem persists after trying these solutions, please contact Amazon Basics customer support.
6. Specifikace produktu
| Funkce | Detail |
|---|---|
| Číslo modelu | L6LM-N-B |
| Značka | Základy Amazonu |
| Typ kabelu | USB-A to Lightning |
| Délka | 91.44 cm (3 Foot) |
| Barva | Stříbro |
| Materiál | Double Braided Nylon |
| Certifikace MFi | Ano |
| Maximální nabíjecí proud | Až do 2.4 Amps |
| Rychlost přenosu dat | Až 480 megabitů za sekundu |
| Kompatibilní zařízení | iPhone SE (2nd Gen) / 11 / XS / XS Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / 5s / 5c / 5 / iPad Pro / iPad Air / Air 2 / iPad mini / mini 2 / mini 4 / iPad 4th gen / iPod Touch 5th gen / iPod nano 7th gen and Beats Pill+ |
| Rozměry produktu | 10.01 x 6.35 x 2.79 cm (zabaleno) |
| Hmotnost položky | 27.21 g |
| Země původu | Vietnam |
7. Záruka a podpora
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics website. You can also contact Amazon customer service directly for assistance with your product.
Online podpora: Zákaznický servis Amazon
