Uživatelská příručka k subwooferu FUSION FM-S10SB pro lodní použití

Zavedení

Thank you for choosing the FUSION FM-S10SB Flush Mount Marine Subwoofer. This 10-inch, 400W subwoofer is engineered for marine environments, featuring a square grille, sealed water-resistant construction, and a polypropylene cone with a rubber surround. It is designed to deliver high-quality bass while withstanding harsh marine conditions, meeting IP65 water and dust resistance standards and complying with ASTM standards for UV stability and salt/fog resistance.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FUSION marine subwoofer. Please read it thoroughly before installation and keep it for future reference.

Bezpečnostní informace

Always observe the following safety precautions to prevent injury or damage to the product and vessel:

• Odpojení napájení: Disconnect the vessel's power supply before beginning any installation or wiring.
• Správné zapojení: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Refer to the wiring diagram in the installation section.
• Větrání: Zajistěte dostatečné větrání kolem subwooferu, abyste zabránili přehřátí.
• Místo montáže: Choose a stable and secure mounting location that can support the weight of the subwoofer and is free from obstructions.
• Vystavení vodě: While the subwoofer is water-resistant (IP65 rated), avoid direct high-pressure water jets or submersion.
• Profesionální instalace: If you are unsure about any aspect of the installation, consult a qualified marine electronics installer.
• Úrovně hlasitosti: Dlouhodobé vystavení vysokým úrovním hlasitosti může způsobit poškození sluchu.

Návrh 65 Varování: Tento produkt vás může vystavit chemikáliím, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Pro více informací přejděte na www.P65Warnings.ca.gov.

Co je v krabici

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• FUSION FM-S10SB Flush Mount Marine Subwoofer
• Installation Material (screws, mounting template if applicable)
• Pokyny k použití (tato příručka)

Nastavení a instalace

Proper installation is crucial for optimal performance and longevity of your subwoofer. Follow these steps carefully:

1. Výběr místa montáže

Select a flat, stable surface on your vessel that can accommodate the subwoofer's dimensions (9.84 x 5.51 x 5.04 inches) and provide sufficient clearance behind for wiring and air circulation. The subwoofer is designed for flush mounting.

2. Příprava montážního povrchu

1. Using the provided mounting template (if included), mark the cutout area on the chosen surface.
2. Carefully cut the opening using appropriate tools. Ensure the cut is clean and precise to allow for a snug fit.
3. Drill pilot holes for the mounting screws as indicated by the template.

3. Zapojení subwooferu

The FM-S10SB features a dual 2-ohm voice coil. Ensure your amplifier is compatible with this impedance. Proper wiring is essential for sound quality and to prevent damage to the subwoofer or ampživější.

• Paralelní zapojení (1 ohmu): Spojte kladné svorky obou kmitací cívek dohromady a záporné svorky obou kmitací cívek dohromady. Připojte kombinovaný kladný pól k ampkladný výstup lifiera a kombinovaný negativní pro amplifier's negative output. This configuration presents a 1-ohm load.
• Sériové zapojení (4 ohmů): Připojte kladný pól jedné kmitací cívky k zápornému pólu druhé kmitací cívky. Zbývající kladný pól připojte k ampkladný výstup zkratovacího zdroje a zbývající záporný pól k amplifier's negative output. This configuration presents a 4-ohm load.

Use marine-grade wiring of appropriate gauge for your power requirements. Ensure all connections are secure and protected from moisture.

4. Montáž subwooferu

1. Carefully insert the subwoofer into the prepared cutout.
2. Secure the subwoofer using the provided mounting screws. Do not overtighten, as this can damage the mounting flange.
3. Ensure the grille is properly aligned and seated.

Obrázek: Přední strana view of the FUSION FM-S10SB Marine Subwoofer, showcasing its black square grille and flush-mount design. The grille features a dense pattern of small circular perforations for sound output and protection.

Ovládání subwooferu

The FUSION FM-S10SB subwoofer is a passive component and requires an external amplifier to operate. Once installed and wired correctly, its operation is controlled by your marine audio system's head unit and ampnastavení zvlhčovače.

• AmpNastavení čističky: Adjust the gain, crossover frequency (low-pass filter), and phase settings on your amplifier to optimize the subwoofer's performance with your main speakers. A typical low-pass crossover setting for a subwoofer is between 60Hz and 100Hz.
• Ovládání hlasitosti: Control the overall system volume through your head unit. Avoid pushing the subwoofer to distortion, which can cause damage.
• Doba záběhu: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve its long-term performance.

Údržba

To ensure the longevity and optimal performance of your FUSION marine subwoofer, follow these maintenance guidelines:

• Čištění: Regularly wipe down the grille and surrounding surfaces with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water. Avoid abrasive cleaners or solvents.
• Inspekce: Periodically inspect the subwoofer for any signs of wear, corrosion, or damage to the cone, surround, or grille. Check wiring connections for tightness and corrosion.
• UV ochrana: While the grille is UV-resistant, prolonged exposure to direct sunlight can still affect its appearance over time. Consider using a cover when the vessel is not in use for extended periods.
• Zima: If storing your vessel in freezing temperatures, ensure the subwoofer is protected from extreme cold and moisture.

Odstraňování problémů

If you experience issues with your FUSION FM-S10SB subwoofer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Fusion customer support or a qualified service technician.

Specifikace

Záruka a podpora

Informace o záruce: Your FUSION FM-S10SB Marine Subwoofer comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official Fusion webpodrobné podmínky týkající se záručního krytí, doby trvání a postupu při reklamaci naleznete na webu.

Zákaznická podpora: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fusion customer support. Contact information can typically be found on the Fusion webmístě nebo na obalu produktu.

Online zdroje: Navštivte oficiální Fusion website for the latest product information, FAQs, and additional support resources.