Mount-It! Tempered Glass AV Component Media Stand

Zavedení

This manual provides detailed instructions for the assembly, operation, and maintenance of your Mount-It! MI-8670 4-tier tempered glass AV component media stand. Please read this manual thoroughly before assembly and use to ensure proper installation and safe operation.

Bezpečnostní informace

VAROVÁNÍ:

• Do not overload shelves. Exceeding stated weight capacities can result in instability and potential injury.
• Ensure proper installation to prevent tipping. Always place the stand on a flat, stable surface.
• Keep children and pets away from the assembly area. Small parts may be a choking hazard.
• Handle tempered glass shelves with care to avoid chipping or breakage.

The top shelf has a maximum capacity of 88 lbs (40 kg). The lower shelves each have a maximum capacity of 33 lbs (15 kg).

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, nepokračujte v montáži a kontaktujte zákaznickou podporu.

• Tempered Glass Shelves (4x)
• Steel Support Columns (various lengths)
• Aluminum Caps / Connectors
• Feet / Floor Protectors
• Montážní materiál (šrouby, podložky atd.)
• Montážní nástroj (např. imbusový klíč)

Pokyny k instalaci a montáži

Assembly is designed to be straightforward. Follow these steps carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

Figure 1: Product Dimensions. Each shelf is 23.6 inches wide and 16.5 inches deep. The overall height is 28.4 inches. Vertical clearance between bottom shelves is 7.25 inches, and 11 inches for the top rack.

1. Rozbalte komponenty: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to identify each piece.
2. Připevněte nožičky: Secure the floor protectors or feet to the bottom of the lowest support columns. Ensure they are tightened securely.
3. Assemble First Tier: Place the bottom tempered glass shelf onto the attached feet/columns. Ensure the columns align with the pre-drilled holes in the glass.
4. Add Support Columns: Screw the next set of support columns into the top of the first glass shelf, using the provided aluminum caps/connectors to secure them.
5. Repeat for Subsequent Tiers: Continue adding glass shelves and support columns, working your way upwards. The shelf segments are interchangeable, allowing for customization of height combinations.
6. Bezpečná horní police: Attach the final set of support columns and the top tempered glass shelf. Ensure all connections are tight and stable.
7. Závěrečná kontrola: Gently shake the assembled stand to confirm stability. If any wobbling occurs, re-tighten all connections.

Figure 2: Adjustable Shelving. The modular design allows for customization of shelf heights to accommodate various AV components.

Návod k obsluze

Your Mount-It! AV component media stand is designed to organize and display your audio and video equipment efficiently.

• Umístění: Position the stand on a level, stable surface. Avoid placing it in high-traffic areas where it might be bumped.
• Rozložení hmotnosti: Distribute the weight of your components evenly across the shelves. Do not exceed the maximum weight capacities: 88 lbs for the top shelf, 33 lbs for each lower shelf.
• Správa kabelů: Utilize the open design for easy cable routing and management to maintain a tidy appearance and prevent cable strain.
• Proud vzduchu: The open architecture of the stand promotes constant airflow, which helps keep your electronic components cool and prevents overheating.

Figure 3: Maximum Ventilation. The open design ensures cooling airflow for your AV components.

Figure 4: Strong Glass Shelving. The top shelf supports up to 88 lbs, while the lower shelves each support up to 33 lbs.

Údržba

Pro zachování vzhledu a životnosti vašeho mediálního stojanu:

• Čištění: Wipe with a dry, soft cloth. For glass surfaces, a glass cleaner can be used, applied to the cloth first, not directly to the glass. Avoid abrasive cleaners or harsh chemicals.
• Inspekce: Pravidelně kontrolujte všechna spojení, zda jsou pevná a bezpečná. V případě potřeby je dotáhněte.
• Vyhněte se dopadu: Protect the glass shelves from sharp impacts to prevent chipping or shattering.

Odstraňování problémů

If you encounter issues with your media stand, refer to the following common solutions:

• Stojan je vratký:
  • Ensure all screws and connectors are fully tightened.
  • Verify the stand is on a level surface. Adjust feet if applicable, or place shims under the base if needed.
• Díly nepasují:
  • Dvakrát zkontrolujte kroky montáže a schémata, abyste se ujistili, že jsou díly správně orientovány.
  • Do not force parts together. If a part seems incorrect, contact customer support.
• Škrábance na skle:
  • Minor scratches may be polished with specialized glass scratch removal kits.
  • To prevent future scratches, avoid dragging objects across the glass surface.

Specifikace

Záruka a podpora

Mount-It! products are designed for durability and performance. For specific warranty information or technical support, please refer to the official Mount-It! webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Pro další pomoc navštivte: Mount-It! Official Store