Ameriwood Home Lumina Turntable Stand

1. Konec produktuview

The Ameriwood Home Lumina Turntable Stand is designed to provide a modern and functional storage solution for your record player and vinyl collection. Constructed from laminated particleboard and MDF with metal legs, this stand offers durability and a contemporary aesthetic. It features integrated LED lighting and metal record dividers for organized storage.

Klíčové vlastnosti:

• Durable laminated particleboard and MDF construction.
• Stylish metal legs and a glass shelf.
• Integrated LED lighting with remote control for customizable ambiance.
• Metal record dividers for efficient vinyl organization.
• Compact design suitable for various living spaces.

Figure 1: The Lumina Turntable Stand integrated into a living space.

2. Bezpečnostní informace

Please read and understand all safety warnings and assembly instructions before beginning assembly or use of this product. Failure to follow these instructions may result in injury or damage to the product. Always refer to the complete instruction manual included with your purchase for detailed safety guidelines.

• Unit can tip over causing serious injury or death.
• Do not allow children to climb on unit.
• Put heaviest items on lower shelves or drawers.

3. Nastavení a montáž

The Ameriwood Home Lumina Turntable Stand requires assembly. Two adults are recommended for the assembly process. Please ensure all parts are present before beginning. A screwdriver and hammer are typically required (not included).

For a visual guide to assembly, please refer to the official product video below. This video demonstrates the step-by-step process for constructing your turntable stand.

Postup generálního shromáždění:

1. Vybalte všechny součásti a ověřte je podle seznamu dílů v přiloženém manuálu.
2. Attach the metal legs to the base panel using the provided hardware.
3. Secure the side panels to the base and top panels.
4. Install the LED light strip in the designated area, ensuring proper cable management.
5. Insert the glass shelf into its supports.
6. Place the metal record dividers into the lower storage compartment.
7. Attach the back panel to complete the structure.

Obrázek 2: Zadní view of the assembled stand, showing the back panel.

4. Operating the LED Lighting

The Lumina Turntable Stand features integrated LED lighting to enhance your display. The lights are controlled via a remote control (included).

Instructions for LED Operation:

• Ensure the LED light strip is properly connected to its power source.
• Namiřte dálkový ovladač směrem k LED přijímači.
• Use the ON/OFF button to power the lights.
• Select desired colors or lighting modes using the corresponding buttons on the remote.
• Adjust brightness or speed of dynamic modes as needed.

Figure 3: The stand with its internal LED lighting illuminated.

5. Údržba

To maintain the appearance and longevity of your Lumina Turntable Stand, follow these simple care instructions:

• Čištění: Otřete povrchy měkkým, damp hadříkem. Nepoužívejte agresivní chemikálie, abrazivní čisticí prostředky ani leštidla, která by mohla poškodit povrchovou úpravu.
• Rozlití: Immediately blot any spills with a clean, dry cloth to prevent staining or damage to the laminated surfaces.
• Skleněná police: Clean the glass shelf with a glass cleaner and a soft cloth.
• Umístění: Avoid placing the stand in direct sunlight or near heat sources, as this can cause fading or warping.
• Rozložení hmotnosti: Distribute weight evenly across the top surface and shelves. Do not exceed the maximum weight capacities.

6. Řešení problémů

If you encounter issues with your Lumina Turntable Stand, refer to the following common troubleshooting tips:

• LED světla nefungují:
  • Check if the LED strip is securely plugged into its power adapter and the wall outlet.
  • Ujistěte se, že baterie v dálkovém ovladači jsou funkční a správně vložené.
  • Verify that the remote is pointed directly at the LED receiver.
• Stand Feels Unstable/Wobbly:
  • Re-check all assembly screws and ensure they are tightened. Avoid overtightening, especially with particleboard components, to prevent damage.
  • Ujistěte se, že stojan je umístěn na rovném povrchu.
• Části chybí nebo jsou poškozené:
  • Refer to the contact information in your original product manual for assistance with replacement parts.

7. Specifikace

Figure 4: Detailed dimensions of the Lumina Turntable Stand.

8. Záruka a podpora

For specific warranty information, customer support, or to order replacement parts, please refer to the contact details provided in the original instruction manual included with your purchase. You may also visit the official Ameriwood Home webstránky pro další pomoc.