1. Konec produktuview
The JBL Professional AM7215/66 is a high-power, lightweight, 2-way, full-range loudspeaker system. It features a JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 inch) low-frequency driver and a 2432H high-frequency 38 mm (1.5 inch) exit, 75 mm (3 inch) voice-coil compression driver.
A large format Progressive Transition waveguide ensures excellent coverage and can be rotated to allow the loudspeaker system to be used in either vertical or horizontal orientation. High-slope passive networks are integrated to minimize band overlap, and a well-controlled off-axis response enhances arrayability for various sound reinforcement applications.
Klíčové vlastnosti
- 2265H Differential Drive Low-Frequency Driver for powerful bass response.
- 2432H High-Frequency Compression Driver for clear and precise highs.
- Large PT Progressive Transition waveguide for superior pattern control and low distortion.
- Rotatable waveguide for flexible vertical or horizontal orientation.
- Available in Black or White (AM7215/66) to suit various aesthetic requirements.
2. Rozměry produktu
The following image illustrates the physical dimensions of the JBL Professional AM7215/66 loudspeaker.
The loudspeaker measures approximately 32 inches in height, 22 inches in depth, and 18 inches in width. These dimensions are crucial for planning installation and placement.
3. Nastavení a instalace
Vybalování
Carefully remove the loudspeaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
Úvahy o montáži
The AM7215/66 is designed for various installation methods, including magnetic mounting. Ensure that any mounting hardware used is rated to safely support the loudspeaker's weight (67 pounds). The rotatable waveguide allows for optimal sound dispersion whether the speaker is mounted vertically or horizontally. Consult a professional installer for complex installations or when mounting overhead.
Připojení vodičů
Connect the loudspeaker to a suitable power amplifier using high-quality speaker cables. Ensure correct polarity (+ to + and - to -) to maintain proper phase alignment. Refer to your amplifier's manual for specific connection instructions. This is a passive loudspeaker, requiring an external ampživější.
4. Provoz
Zapnutí/vypnutí
Since the AM7215/66 is a passive loudspeaker, it does not have a direct power switch. Power is supplied by the connected amplifier. Always power on your amplifier after connecting the loudspeaker and power off the amplifier before disconnecting.
Připojení zvukového signálu
Connect your audio source (e.g., mixer, audio interface) to your power amplifier's input. The amplifier's output should then be connected to the AM7215/66 loudspeaker. Adjust volume levels gradually to prevent sudden loud noises or damage to the system.
5. Údržba
Čištění
To clean the loudspeaker, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or components.
Skladování
When not in use for extended periods, store the loudspeaker in a cool, dry environment, away from direct sunlight and extreme temperatures. If possible, use the original packaging for added protection.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk | Nesprávné zapojení; Amplifier off; Source issue; Damaged cable. | Check all cable connections and polarity. Ensure amplifier is powered on and functioning. Verify audio source output. Test with a different cable. |
| Zkreslený zvuk | Přehnané amplifier; Input signal too high; Damaged driver. | Snížit amplifier volume or input gain. Check source signal level. If distortion persists at low volumes, contact support. |
| Přerušovaný zvuk | Loose connection; Faulty cable. | Secure all connections. Replace speaker cables if suspected faulty. |
7. Technické specifikace
| Specifikace | Detail |
|---|---|
| Název modelu | AM7215/66 |
| Typ reproduktoru | Monitor, 2-Way, Full-Range |
| Nízkofrekvenční ovladač | 15-Inch (380 mm) 2265H Differential Drive |
| Vysokofrekvenční ovladač | 1.5-Inch (38 mm) exit, 3-Inch (75 mm) voice-coil 2432H Compression Driver |
| Vlnovod | Large PT Progressive Transition, Rotatable |
| Vzor pokrytí | 60° x 60° |
| Velikost reproduktoru | 15 palce |
| Barva | Černý |
| Rozměry produktu (D x Š x V) | 22 cm x 18 cm x 32 cm |
| Hmotnost položky | 67 libry |
| Zdroj napájení | Corded Electric (via external ampživější) |
| Maximální výstupní výkon reproduktoru | 2400 XNUMX wattů (špička) |
| Režim zvukového výstupu | Stereo (při použití ve dvojicích) |
| Typ montáže | Magnetic Mount (compatible) |
| UPC | 691991011498 |
8. Informace o záruce
The JBL Professional AM7215/66 loudspeaker comes with a limited warranty. Please refer to the official JBL Professional warranty documentation included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
9. Podpora
For technical assistance, service, or further information regarding your JBL Professional AM7215/66 loudspeaker, please visit the official JBL Professional webnebo kontaktujte jejich oddělení zákaznické podpory. Kontaktní údaje obvykle naleznete na webových stránkách výrobce webmístě nebo na obalu produktu.