Cooler Master Hyper 212 LED White Edition CPU Cooler Instruction Manual

1. Úvod

This manual provides essential instructions for the proper installation, operation, and maintenance of your Cooler Master Hyper 212 LED White Edition CPU Cooler. Please read this manual thoroughly before installation to ensure optimal performance and product longevity. This air cooler is designed to efficiently dissipate heat from your Central Processing Unit (CPU), maintaining stable operating temperatures for your system.

2. Obsah balení

Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact your retailer or Cooler Master support.

• Hyper 212 LED White Edition Heatsink Assembly
• 120mm White LED Fan
• Universal Mounting Brackets (for Intel and AMD sockets)
• Backplate (for Intel sockets)
• Montážní šrouby a distanční sloupky
• Termální pasta
• Klipy pro fanoušky
• Uživatelská příručka (tento dokument)

Obrázek 2.1: Hlavní view of the Cooler Master Hyper 212 LED White Edition CPU Cooler, showing the heatsink and attached white LED fan.

3. Specifikace

Image 3.1: Dimensions of the Cooler Master Hyper 212 LED White Edition CPU Cooler.

4. Nastavení a instalace

This section outlines the general installation process. Specific steps may vary slightly depending on your motherboard and CPU socket type. Refer to your motherboard manual for additional guidance.

4.1. Příprava

1. Systém vypnutí: Ujistěte se, že je počítač zcela vypnutý a odpojený od zásuvky.
2. Přístup k základní desce: Otevřete skříň počítače, abyste se dostali k základní desce.
3. Remove Old Cooler (if applicable): Carefully remove any existing CPU cooler and clean off old thermal paste from the CPU and cooler base using isopropyl alcohol and a lint-free cloth.

4.2. Montáž montážního držáku

Follow the instructions for your specific CPU socket type:

• For Intel Sockets (LGA115x/1366/2011/2066):
  1. Attach the appropriate Intel backplate to the rear of your motherboard.
  2. Secure the Intel mounting standoffs through the motherboard holes into the backplate.
  3. Place the Intel mounting arms onto the standoffs and secure them with the provided screws.
• For AMD Sockets (AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1):
  1. Utilize the motherboard's existing AMD backplate.
  2. Attach the appropriate AMD mounting standoffs to the motherboard's cooler retention module.
  3. Place the AMD mounting arms onto the standoffs and secure them with the provided screws.

4.3. Heatsink Installation

1. Naneste termální pastu: Apply a small, pea-sized amount of thermal paste to the center of your CPU's Integrated Heat Spreader (IHS). Do not spread it manually; the pressure from the heatsink will distribute it evenly.
2. Montáž chladiče: Carefully place the heatsink onto the CPU, aligning the mounting holes on the heatsink base with the mounting arms.
3. Bezpečný chladič: Using the provided spring-loaded screws, alternately tighten the screws in a diagonal pattern until they are finger-tight. Do not overtighten.

Obrázek 4.1: Nahoře view of the heatsink assembly, showing the copper heat pipes and aluminum fins.

4.4. Instalace ventilátoru

1. Attach Fan Clips: Secure the fan clips to the sides of the 120mm fan.
2. Montáž ventilátoru: Hook the fan clips onto the heatsink fins, ensuring the fan is oriented to blow air through the heatsink towards the rear or top of your case.
3. Připojení kabelu ventilátoru: Connect the 4-pin PWM fan cable from the fan to the "CPU_FAN" header on your motherboard.
4. Connect LED Cable (if separate): If your fan has a separate LED power cable, connect it to an available 3-pin or 4-pin RGB/LED header on your motherboard, if applicable. (Note: This model features white LEDs integrated into the fan, typically powered via the 4-pin fan header).

Obrázek 4.2: Boční strana view of the cooler, illustrating the fan attachment to the heatsink.

5. Návod k obsluze

Once installed, the Cooler Master Hyper 212 LED White Edition operates automatically based on your motherboard's fan control settings.

• Ovládání ventilátoru: The 4-pin PWM connector allows your motherboard to dynamically adjust the fan speed based on CPU temperature, optimizing for both cooling performance and noise levels. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
• LED osvětlení: The integrated white LEDs will illuminate when the fan receives power. These LEDs are static white and are not individually addressable or color-changeable.
• Počáteční spuštění: After installation, power on your system and monitor CPU temperatures using system monitoring software. Ensure the fan is spinning correctly.

6. Údržba

Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your CPU cooler.

• Odstranění prachu: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to gently blow dust out of the heatsink fins and fan blades. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the fan motor.
• Čištění ventilátoru: If dust buildup is heavy, you may carefully detach the fan from the heatsink (refer to Section 4.4) for more thorough cleaning.
• Opětovná aplikace termální pasty: Thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures over time, or if you remove the cooler for any reason, it is recommended to clean off the old thermal paste and apply a fresh layer.

7. Řešení problémů

If you encounter issues with your CPU cooler, refer to the following common problems and solutions:

• Ventilátor se netočí:
  • Ensure the 4-pin fan cable is securely connected to the "CPU_FAN" header on your motherboard.
  • Check your motherboard's BIOS/UEFI settings to ensure the CPU fan header is enabled and configured correctly.
  • Verify that the fan blades are not obstructed by cables or other components.
• Vysoké teploty procesoru:
  • Confirm the heatsink is securely mounted and making proper contact with the CPU.
  • Ensure thermal paste was applied correctly and evenly. Reapply if necessary.
  • Check for excessive dust buildup on the heatsink fins and fan, and clean if needed.
  • Verify proper airflow within your PC case. Ensure case fans are correctly oriented to provide adequate intake and exhaust.
  • Confirm the fan is spinning at an appropriate speed. Adjust fan curves in BIOS/UEFI if temperatures remain high at low fan speeds.
• Nadměrný hluk ventilátoru:
  • Zkontrolujte, zda do lopatek ventilátoru nenarážejí nějaké kabely nebo překážky.
  • Ensure the fan is securely mounted and not vibrating against the heatsink.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI to a lower RPM if temperatures allow.
  • If the noise is a grinding or rattling sound, the fan bearing may be failing. Contact support for a replacement if under warranty.
• LEDs Not Illuminating:
  • The white LEDs are typically powered through the 4-pin fan header. Ensure the fan is spinning and receiving power.
  • There are no separate controls for the white LEDs on this model; they should illuminate when the fan is powered.

8. Záruka a podpora

The Cooler Master Hyper 212 LED White Edition CPU Cooler (Model RR-212L-16PW-R1) comes with a 2-letá záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

Záruka se nevztahuje na:

• Damage caused by improper installation, accident, abuse, misuse, or natural disaster.
• Neoprávněné úpravy nebo opravy.
• Běžné opotřebení.

For technical support, warranty claims, or further assistance, please visit the official Cooler Master webwebu nebo se obraťte na svého místního prodejce.

Visit Cooler Master Support