Uživatelská příručka k akumulátorovému šroubováku Xiaomi Mi 3.6 V

1. Konec produktuview

The Xiaomi Mi Cordless Screwdriver 3.6V is a portable and powerful tool designed for various household tasks, including assembling furniture, installing light fixtures, and working with electronics. It features a strong magnetic motor, a high-capacity rechargeable battery, and a set of S2 steel bits.

Figure 1.1: Xiaomi Mi Cordless Screwdriver and its accessories.

Klíčové vlastnosti:

• Výkonný magnetický motor: Delivers up to 5 N.m of torque for efficient screwing and unscrewing.
• Bezdrátové a přenosné: Equipped with a 2000mAh rechargeable battery and USB-C charging for convenience.
• High-Quality Bits: Includes 12 S2 alloy steel bits and a 60mm extension rod for various applications.
• One-piece Body Design: Patented screw-free design for durability and comfortable grip.
• Innovative Dial: Three-shift dial for easy one-handed operation (screw in, screw out, lock).
• Integrované LED osvětlení: Three LEDs form a circular light strip for illumination in dim environments.

Figure 1.2: The screwdriver, bit set, and carrying case.

2. Nastavení

2.1 Nabíjení šroubováku

Before first use, fully charge the screwdriver. The device is equipped with a 2000mAh lithium-ion battery and charges via a USB-C port.

1. Najděte nabíjecí port USB-C na šroubováku.
2. Connect the provided USB-C charging cable to the screwdriver.
3. Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
4. The charging indicator will illuminate. Charging typically takes 120-180 minutes for a full charge.
5. Po úplném nabití odpojte nabíjecí kabel.

Obrázek 2.1: Vnitřní view s důrazem na baterii s kapacitou 11 000 mAh.

2.2 Instalace bitů

The screwdriver uses standard 1/4-inch hex shank bits. An extension rod is also included for hard-to-reach areas.

1. Select the appropriate S2 steel bit for your task from the included set.
2. If needed, insert the 60mm extension rod into the screwdriver's magnetic chuck until it clicks into place.
3. Insert the selected bit firmly into the magnetic chuck of the screwdriver or the extension rod. The magnetic chuck will hold the bit securely.
4. To remove a bit, simply pull it straight out.

3. Návod k obsluze

3.1 Zapnutí a vypnutí

The screwdriver is activated by pressing the main trigger button. There is no separate power on/off switch.

3.2 Using the Direction Dial

The innovative three-shift dial located at the rear of the screwdriver controls the rotation direction and locks the tool.

Figure 3.1: The three-shift dial for operation.

• 'L' Position (Screw Out): Rotate the dial to 'L' to set the screwdriver to rotate counter-clockwise, used for loosening or unscrewing fasteners.
• Center Position (Locking): Rotate the dial to the center position (indicated by a dot) to lock the screwdriver. In this position, the trigger will not activate the motor, allowing for manual tightening or loosening if needed, or for safe storage.
• 'R' Position (Screw In): Rotate the dial to 'R' to set the screwdriver to rotate clockwise, used for tightening or screwing in fasteners.

3.3 Aktivace LED světel

The screwdriver features three integrated LED lights around the chuck to illuminate the work area.

Figure 3.2: The integrated LED lights illuminate the work area.

The LED lights automatically turn on when the trigger button is pressed and the screwdriver is in either the 'L' or 'R' position. They will turn off when the trigger is released.

3.4 Obecná obsluha

1. Ensure the correct bit is installed and the direction dial is set to 'L' for unscrewing or 'R' for screwing.
2. Place the tip of the bit onto the head of the fastener.
3. Press the trigger button to activate the screwdriver. Apply gentle, steady pressure to the tool.
4. Release the trigger button once the fastener is tightened or loosened to the desired extent.

Figure 3.3: Screwdriver in use on a bicycle.

Figure 3.4: Screwdriver in use assembling furniture.

4. Údržba

4.1 Čištění

Regular cleaning helps maintain the performance and longevity of your screwdriver.

• Ensure the screwdriver is turned off (dial in center position) and disconnected from any charging cable before cleaning.
• Wipe the exterior of the screwdriver with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Clean any debris from the magnetic chuck and bit holder.
• Udržujte větrací otvory bez prachu a nečistot.

4.2 Skladování

Store the screwdriver and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures.

• Always store the screwdriver with the direction dial in the center (locked) position to prevent accidental activation.
• Utilize the provided carrying case for organized and protected storage of the screwdriver and bits.
• For long-term storage, ensure the battery is partially charged (around 50%) to preserve battery health. Avoid storing with a completely depleted or fully charged battery for extended periods.

5. Řešení problémů

This section addresses common issues you might encounter with your Xiaomi Mi Cordless Screwdriver.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

6. Specifikace

The following table provides the technical specifications for the Xiaomi Mi Cordless Screwdriver 3.6V.

Figure 6.1: Basic parameters and packing list.

Obsah balení:

• Xiaomi Mi Cordless Screwdriver x 1
• Skladovací taška x 1
• Návod k použití x 1
• Bit Box x 1
• Extension Rod x 1
• Bits x 12
• Nabíjecí kabel x 1

7. Záruka a podpora

For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Xiaomi provides customer support for its products.

For additional support or to explore other Xiaomi products, you may visit the official Xiaomi store:

Navštivte obchod XIAOMI na Amazonu

Uschovejte si prosím doklad o koupi pro případné reklamace.