Zavedení
Thank you for choosing the Steinel L 800 SC Smart LED Outdoor Wall Light. This intelligent downlight combines modern design with advanced technology, featuring an invisible high-frequency motion detector and Bluetooth connectivity for app control. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor light.
Figure 1: Steinel L 800 SC Smart LED Outdoor Wall Light, anthracite color, mounted on a wall.
Bezpečnostní pokyny
- Elektrická instalace: Installation must be performed by a qualified electrician in accordance with national wiring regulations and local safety standards. Ensure the power supply is disconnected before installation or maintenance.
- svtage: This product operates on 220-240 V / 50-60 Hz. Verify your power supply matches these requirements.
- Zdroj světla LED: The LED light source is integrated and not user-replaceable. Do not attempt to open or modify the light source.
- Venkovní použití: The light is designed for outdoor use with an IP44 rating, protecting against solid objects larger than 1mm and water splashes from any direction.
- Čištění: Před čištěním odpojte napájení. Použijte měkký,amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
Obsah balení
Opatrně vybalte krabici a ujistěte se, že jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, obraťte se na prodejce.
- Steinel L 800 SC LED Outdoor Wall Light
- Montážní materiál (šrouby, hmoždinky)
- Návod k použití
Figure 2: Package contents including the light, mounting hardware, and manual.
Nastavení
1. Montáž světla
- Choose a suitable mounting location on an exterior wall, ensuring it is within reach of the electrical supply and provides the desired illumination area.
- Use the provided mounting template (if included) or the light fixture itself to mark the drilling points on the wall.
- Vyvrtejte otvory a vložte do nich hmoždinky.
- Secure the mounting bracket (if separate) or the light fixture directly to the wall using the supplied screws.
Figure 3: Technical drawing with dimensions for mounting.
2. Elektrické připojení
- Ensure the main power supply is switched off at the circuit breaker.
- Connect the electrical wires from your mains supply to the terminals on the light fixture. Follow the wiring diagram provided in the quick start guide for correct live, neutral, and earth connections.
- Carefully secure the wiring and close the terminal box, ensuring a watertight seal.
- Attach the light fixture to the mounting bracket or directly to the wall, ensuring it is firmly in place.
- Obnovte napájení obvodu.
3. App Installation and Initial Pairing
- Stáhněte si zdarma STEINEL Connect aplikaci z obchodu s aplikacemi ve vašem chytrém telefonu (k dispozici pro iOS a Android).
- Povolte na svém smartphonu Bluetooth.
- Open the STEINEL Connect app and follow the on-screen instructions to discover and pair with your L 800 SC light. The app will guide you through the initial setup process.
Obsluha Světla
The Steinel L 800 SC offers versatile control options through its integrated motion sensor and the STEINEL Connect app.
Basic Light Functions
- Soft Light Start: The light features a soft light start, gradually increasing brightness to prevent sudden glare.
- Teplé bílé osvětlení: The 7.5 W LED system provides 466 lm of 3000K warm white light, creating an inviting ambiance.
Figure 4: Key features of the L 800 SC light.
Nastavení pohybového senzoru
The precise 160° invisible high-frequency detector is flexibly adjustable on two axes via the app and detects movement within a perimeter of up to 5 meters.
- Rozsah detekce: Adjustable from 1 to 5 meters.
- Detekční úhel: 160 stupňů.
- Nastavení soumraku: The light can be configured to activate based on ambient light levels (2-2000 lux).
- Délka osvětlení: Adjustable from 5 seconds to 60 minutes after motion detection.
Figure 5: Illustration of high-frequency motion detection.
Figure 6: Motion sensor coverage around a house.
App Features (STEINEL Connect)
The STEINEL Connect app unlocks the full potential of your lighting, with regular updates and an evolving product range. Key features include:
- Stmívatelné osvětlení: Adjust night light and main light intensity from 0-100%.
- Funkce časovače: Set daily and weekly schedules for light activation.
- Permanent Light: Option to switch on permanent light for extended periods.
- Nastavení soumraku: Fine-tune the ambient light level at which the sensor activates.
- Bezdrátové sítě: Connect multiple lights without an additional bridge for synchronized control.
- Learning Twilight Settings: The app can learn optimal lux and time settings for twilight.
Figure 7: STEINEL Connect app interface for light settings.
Figure 8: Digital adjustment of sensor settings via the app.
Údržba
The Steinel L 800 SC is designed for durability and minimal maintenance. Regular cleaning will help maintain its appearance and performance.
- Čištění: To clean the light, ensure the power is disconnected. Use a soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive materials that could damage the finish or sensor.
- Životnost LED diod: The integrated LED has an average lifespan of 50,000 hours, equivalent to approximately 30 years with 4.5 hours of daily use. No routine LED replacement is required.
- Inspekce: Periodically check the mounting and electrical connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Odstraňování problémů
If you encounter issues with your Steinel L 800 SC, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power supply, incorrect wiring, faulty LED. | Check circuit breaker. Verify wiring connections. If LED is faulty, contact support. |
| Pohybový senzor nedetekuje. | Incorrect sensitivity setting, obstructed sensor, ambient light too high. | Adjust sensor sensitivity via the app. Clear any obstructions. Adjust twilight setting in the app. |
| Světlo svítí neustále. | Permanent light function activated, continuous motion detected. | Deactivate permanent light in the app. Check for constant motion in the detection zone. |
| Nelze se připojit k aplikaci přes Bluetooth. | Bluetooth off, light too far, app issue. | Ensure Bluetooth is enabled on your device. Move closer to the light. Restart the app or your device. |
Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Steinel |
| Číslo modelu | 065690 |
| Rozměry (D x Š x V) | 14.5 x 23 x 8.8 cm |
| Hmotnost | 910 g |
| Materiál | Hliník |
| Barva | Antracit |
| Napájení | 220-240V / 50-60Hz |
| Spotřeba energie | 7.5 wattů |
| Světelný tok | 466 lm |
| Teplota barev | 3000 Kelvinů (teplá bílá) |
| Index podání barev (CRI) | 80 |
| Průměrná životnost | 50,000 hodiny |
| Hodnocení ochrany proti vniknutí (IP). | IP44 |
| Typ snímače pohybu | High-frequency (invisible) |
| Úhel detekce pohybového senzoru | 160° |
| Dosah detekce pohybového senzoru | Až 5 metrů |
| Konektivita | Bluetooth |
| Typ instalace | Držák na zeď |
Záruka a podpora
Steinel products are manufactured to the highest quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official Steinel website. For technical support or further assistance, please contact Steinel customer service.
Výrobce: Steinel GmbH
