Amazon Basics 50 Pint Dehumidifier with Drain Pump User Manual

Zavedení

This manual provides instructions for the safe operation, installation, maintenance, and troubleshooting of your Amazon Basics 50 Pint Dehumidifier with Drain Pump. This Energy Star certified unit is designed to effectively reduce humidity in spaces up to 4000 square feet, maintaining optimal indoor humidity between 45-55% for enhanced comfort and air quality. It features a continuous drain pump, timer, auto-defrost, and overflow protection.

Důležité bezpečnostní pokyny

Read all instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Odvlhčovač vždy umístěte na rovný a stabilní povrch.
• Ujistěte se, že je jednotka řádně uzemněna.
• Neprovozujte jednotku s poškozeným napájecím kabelem nebo zástrčkou.
• Keep at least 8 inches (20 cm) of space around the unit for proper airflow.
• Nevkládejte předměty do vstupu nebo výstupu vzduchu.
• Před čištěním nebo prováděním jakékoli údržby odpojte jednotku ze zásuvky.
• Nepoužívejte odvlhčovač v blízkosti hořlavých plynů nebo hořlavých materiálů.
• Tento spotřebič je určen pouze pro domácí použití.

Konec produktuview

Seznamte se s komponenty vašeho odvlhčovače.

Přední view of the Amazon Basics 50 Pint Dehumidifier, showing the air intake grille and water tank.

Diagram illustrating the control panel, humidity display, auto-defrost, auto re-start, and overflow protection features.

Ovládací panel

The control panel allows you to manage the dehumidifier's settings. It includes buttons for power, mode selection, fan speed, timer, and humidity adjustment, along with a digital display for current humidity levels.

Close-up of the dehumidifier's top panel, showing the control buttons and digital display.

Nádrž na vodu

The dehumidifier collects moisture in a removable water tank. The tank has a capacity of 1.59 gallons (6 liters) and features a full indicator to signal when it needs to be emptied.

Image showing the "Tank Full" indicator light on the control panel.

Přenosnost

The unit is equipped with durable and smooth caster wheels for easy movement. A cord wrap is also provided for tidy storage of the power cord.

Zadní view of the dehumidifier, highlighting the cord wrap for power cable management and the caster wheels for mobility.

Nastavení

1. Rozbalení: Opatrně vyjměte odvlhčovač z obalu. Uschovejte si obalový materiál pro budoucí skladování nebo přepravu.
2. Umístění: Place the unit upright on a firm, level surface in the desired location. Ensure there is at least 8 inches (20 cm) of clear space around the air inlet and outlet for optimal performance. Avoid placing it against walls or furniture that could obstruct airflow.
3. Počáteční pohotovostní režim: After unpacking, allow the unit to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle.
4. Připojení napájení: Plug the grounded power cord into a suitable electrical outlet.

Návod k obsluze

Zapnutí/vypnutí

• Stiskněte tlačítko napájení (⏻) pro zapnutí nebo vypnutí jednotky.
• The unit will display the current room humidity when turned on.

Nastavení požadované úrovně vlhkosti

• Press the "Humidity" button (often indicated by % or a droplet icon) to cycle through desired humidity settings.
• Použijte Nahoru (∧) a dolů (∨) arrows to adjust the target humidity level between 35% and 85% in 5% increments.
• Jednotka bude pracovat, dokud nedosáhne nastavené úrovně vlhkosti, a poté se bude cyklicky zapínat a vypínat, aby ji udržela.

Volba rychlosti ventilátoru

• Press the "Fan Speed" button (often indicated by a fan icon) to select between High, Medium, or Low fan speeds.
• Higher fan speeds result in faster dehumidification and more noise.

Funkce časovače

• Press the "Timer" button (often indicated by a clock icon) to set a delayed start or stop time.
• Použijte Nahoru (∧) a dolů (∨) arrows to set the desired time from 0.5 to 24 hours.
• The timer can be used to automatically turn the unit on or off after the set duration.

Continuous Drain Operation (With Drain Pump)

This model includes a continuous drain pump, eliminating the need for manual tank emptying. This is ideal for basements or areas where continuous operation is desired.

1. Locate the drain hose outlet on the back of the unit.
2. Connect a standard garden hose (not included) to the drain hose outlet. Ensure the connection is secure to prevent leaks.
3. Route the other end of the hose to a suitable drain (e.g., floor drain, sink, or outside). Ensure the hose is sloped downwards to allow gravity to assist drainage, or utilize the internal pump for upward drainage.
4. Activate the continuous drain pump function via the control panel if a specific setting is available, or ensure the hose is properly connected for automatic pump activation when the tank fills.

Illustration showing two methods for water drainage: manual emptying of the tank and continuous drainage via a hose connection.

Auto Re-start Function

V případě výpadku proudutage, the dehumidifier will automatically resume operation with its previous settings once power is restored.

Funkce automatického odmrazování

If frost builds up on the evaporator coils, the unit will automatically enter defrost mode to melt the ice, ensuring efficient operation.

Údržba

Emptying the Water Tank (Manual)

When the water tank is full, the "Tank Full" indicator light will illuminate, and the unit will stop operating. Empty the tank as follows:

1. Gently pull the water tank outwards from the front of the unit.
2. Opatrně přeneste nádrž k dřezu nebo odpadu a vylijte nahromaděnou vodu.
3. Slide the empty tank back into the dehumidifier until it clicks into place. The unit will resume operation automatically.

Image illustrating the process of removing the water collection tank from the dehumidifier.

Čištění vzduchového filtru

The reusable air filter should be cleaned regularly (approximately every two weeks, or more often depending on usage) to maintain optimal performance.

1. Vypněte a odpojte odvlhčovač.
2. Locate the air filter, typically behind the front grille or on the side/back panel.
3. Vyjměte filtr.
4. Wash the filter with warm, soapy water. Rinse thoroughly and allow it to air dry completely before re-installing. Do not use a dishwasher or harsh chemicals.
5. Re-install the dry filter into the unit.

Image showing a hand removing the reusable air filter for cleaning.

Čištění vnějšího povrchu jednotky

• Vnější povrch otřete měkkým, damp tkanina.
• Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.

Odstraňování problémů

Specifikace

Informace o záruce

This Amazon Basics dehumidifier is covered by a 1letá omezená záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from accident, misuse, abuse, alteration, or improper installation. For warranty claims, please retain your proof of purchase.

For detailed warranty terms and conditions, please refer to the official warranty document available on the product's Amazon page or contact customer support.

Link to Warranty Document: Amazon Basics Warranty (PDF)

Zákaznická podpora

If you have any questions, require assistance, or need to report an issue with your Amazon Basics dehumidifier, please contact Amazon Customer Service. You can typically find contact information on the Amazon website under "Help" or "Customer Service."

Please have your product model number (MDUDP-50AEN1-BA8B) and proof of purchase ready when contacting support.