ECOELER CDR615-5K-4

ECOELER 6-Inch LED Low Profile Disk Light (Model CDR615-5K-4) Instruction Manual

1. Úvod a produktview

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-inch LED Low Profile Surface Mount Disk Light, model CDR615-5K-4. This energy-efficient LED ceiling light features 16.5 watts of power, delivering 1000 lumens of 5000K daylight illumination. Its ultra-thin design with an aluminum trim is suitable for various indoor applications and is ETL & FCC listed for safety and quality.

ECOELER 6-inch LED Low Profile Světlo disku

Figure 1: ECOELER 6-inch LED Low Profile Disk Light, showcasinjeho elegantní design.

Klíčové vlastnosti:

2. Bezpečnostní informace

Please read all instructions carefully before installation. Failure to do so may result in electric shock, fire, or other hazards. Always follow local electrical codes and regulations. If you are unsure about any part of the installation, consult a qualified electrician.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty. Pokud některé díly chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

Diagram of ECOELER disk light components including spring clips, E26 adapter, screws, and wire nuts.

Figure 2: Included installation accessories for the ECOELER LED Disk Light.

4. Pokyny k instalaci

The ECOELER LED Disk Light is designed for versatile installation, fitting both 3.5" & 4" junction boxes and 5/6" recessed cans. Choose the appropriate method below.

4.1. Junction Box Installation

  1. Vypnout napájení: Ensure power to the junction box is turned off at the circuit breaker.
  2. Remove lens: Gently twist the lens counter-clockwise to remove it from the fixture.
  3. Připojte dráty: Connect the supply wires to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
  4. Attach fixture: Align the fixture with the junction box and secure it using the provided screws.
  5. Reattach lens: Twist the lens clockwise until it is securely in place.
  6. Obnovení napájení: Zapněte napájení na jističi.
Diagram showing steps for installing the ECOELER disk light into a junction box.

Figure 3: Step-by-step guide for Junction Box Installation.

4.2. Recessed Can Installation

  1. Vypnout napájení: Ensure power to the recessed can is turned off at the circuit breaker.
  2. Remove lens: Gently twist the lens counter-clockwise to remove it from the fixture.
  3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
  4. Připojte dráty: Connect the fixture wires to the E26 adapter wires (black to black, white to white).
  5. Attach spring clips: Insert the spring clips into the designated slots on the fixture.
  6. Push into can: Carefully push the disk light into the recessed can until the spring clips hold it securely in place.
  7. Reattach lens: Twist the lens clockwise until it is securely in place.
  8. Obnovení napájení: Zapněte napájení na jističi.
Diagram showing steps for installing the ECOELER disk light into a recessed can.

Figure 4: Step-by-step guide for Recessed Can Installation.

5. Návod k obsluze

The ECOELER LED Disk Light is designed for simple operation once installed.

5.1. Zapnutí/vypnutí

Control the light using a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.

5.2 Funkce stmívání

This fixture is smoothly dimmable from 5% to 100% when connected to a compatible LED dimmer switch. Adjust the dimmer switch to achieve your desired brightness level.

Image illustrating the smooth dimming capability of the ECOELER LED disk light from 5% to 100%.

Figure 5: Illustration of the smooth dimming range.

6. Údržba

The ECOELER LED Disk Light requires minimal maintenance.

7. Řešení problémů

If you encounter issues with your ECOELER LED Disk Light, refer to the following common troubleshooting steps:

ProblémMožná příčinaŘešení
Světlo se nerozsvítí.Zařízení není napájeno.
Uvolněné připojení kabeláže.
Vadný spínač.
Zkontrolujte jistič.
Ujistěte se, že jsou všechna kabelová připojení bezpečná (nejprve vypněte napájení).
Test the switch with another device.
Světlo bliká.Nekompatibilní stmívač.
Uvolněné vedení.
Ensure dimmer is LED compatible.
Zkontrolujte zapojení kabeláže (nejprve vypněte napájení).
Světlo je příliš slabé nebo příliš jasné.Nastavení stmívače.Nastavte stmívač na požadovaný jas.

If these steps do not resolve the issue, please contact ECOELER customer support for further assistance.

8. Specifikace

FunkceDetail
ZnačkaECOELER
Název modeluLED SVĚTLO DISKU
Číslo modelu položkyCDR615-5K-4
Teplota barev5000K denní světlo
Wattage16.5 wattů
Jas1000 XNUMX lumenů
svtage120 voltů
MateriálAcrylic, Aluminum Shell
Rozměry produktu7.2 cm D x 7.2 cm Š x 0.9 cm V
Typ instalaceFlush Mount (fits 3.5"/4" J-Box or 5"/6" Recessed Can)
StmívatelnéAno (plynulé stmívání 5 %–100 %)
Průměrný život50,000 hodiny
Index podání barev (CRI)90.00
CertifikaceETL, FCC
Vnitřní/venkovní použitíVnitřní (vhodné pro Damp umístění)

9. Záruka a podpora

This ECOELER product comes with a manufacturer and seller combination warranty. For specific details regarding the warranty period and coverage, please refer to the product packaging or contact ECOELER customer service.

If you have any questions, require technical assistance, or need to report a problem with your product, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webstránky pro kontaktní informace.

Související dokumenty - CDR615-5K-4

Předview Instalační a uživatelská příručka pro spínač světla s pohybovým senzorem ECOELER YM2108T
Komplexní průvodce instalací, zapojením, nastavením a řešením problémů s pohybovým senzorem ECOELER YM2108T. Mezi funkce patří detekce PIR, časové zpoždění a nastavení úrovně osvětlení.
Předview Installation Guide: 4-Pack 4-Inch Selectable Color LED Recessed Ceiling Lights
Step-by-step installation guide for 4-pack 4-inch dimmable LED recessed ceiling lights with selectable color temperature (3000K/4000K/5000K) and junction box. Includes tools required and safety notes.
Předview Amico 4 Inch 5CCT Ultra-Thin LED Recessed Ceiling Light Installation Guide
Comprehensive installation guide for the Amico 4-inch 5CCT Ultra-Thin LED Recessed Ceiling Light. Covers hole preparation, electrical wiring, fixture mounting, and CCT selection.
Předview Zapuštěná LED stropní světla OmiBrite: Instalační průvodce a specifikace
Komplexní průvodce ultratenkými LED zapuštěnými stropními svítidly OmiBrite. Obsahuje pokyny k instalaci, bezpečnostní varování a podrobné specifikace pro modely o velikosti 4 a 6 palců. Zjistěte více o lumenech, wattechtage, teplota barev a další.
Předview Feit Electric LED Retrofit Recessed Light J-Box Installation Guide
Step-by-step instructions for installing the Feit Electric LED Retrofit Recessed Light Kit Trim, focusing on junction box (J-Box) installation, including wiring and ceiling mounting.
Předview Zouzai 4-Inch Ultra-Thin LED Recessed Light User Manual
User manual for the Zouzai 4-inch ultra-thin LED recessed light, featuring selectable color temperatures (2700K-5000K), 9.5W power, 80W equivalent brightness, dimmable functionality, and ETL/Energy Star certification.