1. Úvod
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your CaDA I.BOT Code Robot (Model C83001W). The I.BOT is a remote-controlled robot construction set consisting of 434 pieces, designed to stimulate imagination and develop hand-eye coordination. Once assembled, the robot can be controlled via an included remote control or a dedicated mobile application, featuring movable limbs and LED-illuminated eyes.
Figure 1.1: CaDA I.BOT Code Robot and its packaging. This image shows the assembled robot alongside its product box, highlighting its design and the "Dual Mode Control" feature.
2. Důležité bezpečnostní informace
- Doporučený věk: This product is suitable for children aged 6 years and up. Adult supervision is recommended during assembly and initial operation.
- Upozornění na malé části: The set contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of infants and toddlers.
- Bezpečnost baterie:
- Vyžaduje 2 baterií AA (nejsou součástí balení).
- Nekombinujte staré a nové baterie.
- Nekombinujte alkalické, standardní (uhlíkovo-zinkové) nebo dobíjecí (nikl-kadmiové) baterie.
- Vložte baterie se správnou polaritou (+ a -).
- Vybité baterie okamžitě vyjměte.
- Nezkratujte kontakty baterie.
- Elektrické komponenty: Handle the robot's electrical components with care. Do not expose to water or extreme temperatures.
- Pohyblivé části: Keep fingers, hair, and loose clothing away from moving parts (e.g., tracks, limbs) during operation to prevent entanglement or injury.
3. Obsah balení
Before beginning assembly, please verify that all components are present. The CaDA I.BOT Code Robot set includes:
- 434 x Building Block Pieces
- 1 x jednotka dálkového ovládání
- 1 x Návod k obsluze (tento dokument)
- Electronic components (motors, LED eyes, control board) integrated within specific blocks.
Note: Batteries (2 x AA) are not included and must be purchased separately.
4. Nastavení a montáž
Follow the step-by-step instructions provided in the included pictorial guide to assemble your I.BOT robot. Assembly typically takes several hours depending on experience.
4.1 Montážní návod
- Rozbalte komponenty: Carefully open the packaging and sort the building blocks by type or color to facilitate assembly.
- Postupujte podle obrazového průvodce: Refer to the separate, detailed assembly booklet. Each step illustrates the required pieces and their placement. Pay close attention to the orientation of specialized parts and electronic components.
- Connect Electronic Parts: Ensure all wires for motors and LED eyes are securely connected to the main control unit as indicated in the assembly guide. Incorrect connections may prevent the robot from functioning.
- Ověřte připojení: Before completing the final steps, double-check all connections and ensure no wires are pinched.
4.2 Instalace baterie
The I.BOT robot requires 2 x AA batteries for operation. The battery compartment is typically located on the main body of the robot or the remote control unit.
- Locate the battery compartment on the robot (refer to the assembly guide for exact location).
- Using a small screwdriver (if required), open the battery compartment cover.
- Insert 2 x AA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
- Nasaďte zpět kryt prostoru pro baterie a zajistěte jej.
- Repeat the process for the remote control unit if it also requires batteries (usually 2 x AAA, but check the remote itself).
Obrázek 4.1: Přední strana view of the assembled CaDA I.BOT Code Robot. This image displays the robot's front, showing its LED eyes, track system, and movable arms.
5. Operating the I.BOT Robot
The I.BOT robot offers dual control modes: via the included remote control or a dedicated mobile application.
5.1 Obsluha dálkového ovladače
- Zapnutí: Ensure batteries are installed in both the robot and the remote control. Turn on the robot using the power switch (usually located near the battery compartment). Turn on the remote control.
- Párování: The robot and remote control should automatically pair. If not, refer to the remote control's specific instructions for pairing mode.
- Hnutí: Use the joysticks or directional buttons on the remote control to move the robot forward, backward, left, and right.
- Limb Control: Dedicated buttons on the remote control will operate the robot's movable limbs and other functions, such as activating the LED eyes.
5.2 Ovládání mobilní aplikací
- Stáhnout aplikaci: Hledat the "CaDA I.BOT" or "CaDA Robot" app on your device's app store (iOS App Store or Google Play Store).
- Instalace a otevření: Nainstalujte aplikaci a otevřete ji.
- Připojení Bluetooth: Ensure Bluetooth is enabled on your mobile device. Turn on the I.BOT robot. Within the app, select the option to connect to a new device. Select "I.BOT C83001W" from the list of available devices.
- Ovládací rozhraní: Once connected, the app will display a control interface. This typically includes virtual joysticks for movement, buttons for limb control, and options for programming simple sequences.
- Programování (pokud je to relevantní): The app may offer basic coding or sequence programming features. Refer to the app's in-app help or tutorials for detailed instructions on these advanced functions.
Obrázek 5.1: Zadní view of the assembled CaDA I.BOT Code Robot. This image shows the robot from behind, detailing its track mechanism and the back of its head unit.
6. Údržba
6.1 Čištění
- Robota a dálkový ovladač otřete měkkým, suchým hadříkem.
- Do not use harsh chemicals, abrasive cleaners, or water directly on the electronic components.
- Periodically check the tracks for any debris or hair that might impede movement.
6.2 Skladování
- When not in use for extended periods, remove batteries from both the robot and the remote control to prevent leakage.
- Robota skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
- Keep the robot and its components in their original packaging or a suitable storage container to prevent loss of parts.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Robot se nezapne. |
|
|
| Robot nereaguje na dálkové ovládání. |
|
|
| Robot moves slowly or erratically. |
|
|
| LED oči nesvítí. |
|
|
8. Specifikace
| Číslo modelu | C83001W |
| Značka | CaDA |
| Počet kusů | 434 |
| Doporučený věk | 6 let a více |
| Typ materiálu | Plast |
| Jsou vyžadovány baterie | Yes (2 x AA for robot, check remote for its battery type) |
| Baterie jsou součástí dodávky | Žádný |
| Typ ovládání | Dálkové ovládání, mobilní aplikace |
| Rozměry produktu (smontovaný) | Přibližně 21.6 x 15.2 cm |
| Vzdělávací cíle | Concentration, Construction, Fantasy development |
9. Záruka a podpora
CaDA products are manufactured to high quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims.
9.1 Zákaznická podpora
For technical assistance, missing parts, or any inquiries regarding your CaDA I.BOT Code Robot, please contact the manufacturer or your retailer's customer service. When contacting support, please have your product model number (C83001W) and purchase information ready.
You may find additional support resources, FAQs, and contact information on the official CaDA website (if available, search online for "CaDA official webwebu“).
