1. Konec produktuview
The Einhell CE-BC 6 M is an intelligent, microprocessor-controlled battery charger designed for a wide range of 12V vehicle battery types, including gel, AGM, and maintenance-free/low-maintenance lead-acid batteries. This advanced charger features a multi-stage charging cycle, automatic voltage adaptation (12V), and specialized modes for optimal battery care. Its intelligent electronics analyze the connected battery's type and condition to initiate the most suitable charging process, ensuring a gentle and efficient charge for extended battery life.
Key features include a maintenance charge function to prevent deep discharge, a Winter Mode for charging below 5°C, a Recondition Mode for deeply discharged batteries, and a Power Supply Mode. The unit is equipped with comprehensive safety protections against overload, short circuits, and reverse polarity, safeguarding both the charger and the battery. An LCD display provides real-time information on battery voltage a průběh nabíjení.
Figure 1: Einhell CE-BC 6 M Battery Charger. The device is predominantly red and black, featuring an LCD display that shows '13.4V' and a battery charge indicator. Attached are red and black insulated battery clamps, ready for connection. The top of the unit has a black hanging eyelet for convenient storage.
2. Bezpečnostní pokyny
Before operating the Einhell CE-BC 6 M battery charger, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Osobní bezpečnost: Always wear eye protection and protective clothing when working with batteries. Batteries can produce explosive gases.
- Větrání: Ensure the charging area is well-ventilated. Do not operate the charger in a confined space.
- Hořlavé materiály: Udržujte jiskry, plameny a kouřící materiály v dostatečné vzdálenosti od baterie a nabíječky.
- Typ baterie: This charger is designed for 12V lead-acid, gel, and AGM batteries. Do not attempt to charge non-rechargeable batteries or batteries with different voltage hodnocení.
- Frozen Batteries: Never attempt to charge a frozen battery. Allow it to thaw before charging.
- Spojení: Always connect the charger to the battery before plugging it into the mains power supply. Disconnect from the mains before disconnecting the battery.
- Poškozené vybavení: Do not operate the charger if the power cord, clamps, or charger unit itself is damaged. Contact qualified service personnel for repair.
- Děti a domácí mazlíčci: Uchovávejte nabíječku a baterii mimo dosah dětí a domácích zvířat.
- Obrácená polarita: The charger has reverse polarity protection, but always double-check connections to prevent damage.
3. Nastavení a příprava
- Rozbalit: Opatrně vyjměte nabíječku a veškeré příslušenství z obalu.
- Kontrolovat: Check the charger, cables, and clampZkontrolujte, zda nejeví známky poškození. Nepoužívejte, pokud je výrobek poškozený.
- Větrání: Umístěte nabíječku na dobře větrané místo, mimo dosah přímého slunečního záření, zdrojů tepla a vlhkosti.
- Příprava baterie:
- For conventional lead-acid batteries, check the electrolyte level and top up with distilled water if necessary (do not overfill).
- Clean the battery terminals to ensure good electrical contact.
- Ensure the battery is not frozen.
- Montáž (volitelné): The charger housing includes an eyelet for wall mounting, allowing for convenient storage and use.
4. Návod k obsluze
4.1. Připojení nabíječky
- Připojte pozitivně: Attach the red (+) battery clamp ke kladnému (+) pólu baterie.
- Připojit negativní: Attach the black (-) battery clamp k zápornému (-) pólu baterie.
- Connect to Mains: Plug the charger's power cord into a standard 230V AC wall outlet. The charger will power on and perform an initial self-check.
4.2. Výběr režimu nabíjení
The Einhell CE-BC 6 M automatically detects the battery type and condition. Use the mode button (if present, or refer to the display for automatic selection) to cycle through available modes if manual selection is required for specific functions.
- Standardní poplatek: The charger will automatically select the appropriate multi-stage charging cycle for 12V batteries.
- Winter Mode (below 5°C): Activates a specialized charging curve for optimal performance in cold temperatures.
- Režim rekondice: Designed to revive deeply discharged batteries. This mode applies a specific charging profile to attempt recovery.
- Režim napájení: Allows the charger to function as a stable 12V power supply, useful for maintaining vehicle electronics during battery changes or diagnostics.
4.3. Monitoring the Charging Process
LCD displej poskytuje informace v reálném čase:
- Baterie Voltage: Zobrazuje aktuální objemtage připojené baterie.
- Průběh nabíjení: Označuje aktuální stage of the charging cycle.
- Indikátor režimu: Displays the active charging mode (e.g., Winter, Recondition).
- Stav baterie: Grafické znázornění úrovně nabití baterie.
The charger will automatically switch to maintenance charge mode once the battery is fully charged, preventing overcharging and maintaining optimal battery health.
4.4. Odpojení nabíječky
- Disconnect Mains: Unplug the charger's power cord from the wall outlet.
- Disconnect Negative: Detach the black (-) battery clamp from the negative (-) terminal of the battery.
- Disconnect Positive: Detach the red (+) battery clamp from the positive (+) terminal of the battery.
5. Údržba a skladování
- Čištění: Disconnect the charger from the mains and battery before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Kontrola kabelů: Regularly inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Replace damaged cables immediately.
- Clamp Péče: Udržujte baterii vybitouamps clean and free of corrosion to ensure good electrical contact.
- Skladování: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
- Dlouhodobé skladování: If the charger is not used for an extended period, ensure it is stored in its original packaging or a protective container.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nabíječka se nezapne. | No power from mains outlet. Poškozený napájecí kabel. | Check the wall outlet with another appliance. Inspect power cord for damage; do not use if damaged. |
| Baterie se nenabíjí. | Nesprávné připojení baterie. Baterie je silně vybitá nebo vadná. Byl vybrán nesprávný režim. | Zajistěte třamps are securely connected to correct terminals. Try Recondition Mode for deeply discharged batteries. If still no charge, battery may be beyond recovery. Verify the correct charging mode is active on the LCD display. |
| "Error" or warning on display. | Připojení s obrácenou polaritou. Zkrat. Přetížení. | Disconnect from mains, then reconnect clamps correctly (red to +, black to -). Check for short circuits in cables or clamps. Ensure battery capacity is within charger's specifications. |
| Nabíječka se během provozu zahřívá. | Normální provoz. | A slight increase in temperature is normal during charging. Ensure adequate ventilation. If excessively hot, disconnect and contact support. |
7. Technické specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Einhell |
| Číslo modelu | 1002235 (CE-BC 6 M) |
| Vstupní objemtage | 120 voltů (AC) |
| Výstupní objemtage | 12 V (DC) |
| Nabíjecí proud | 6 Amperes |
| Kompatibilní typy baterií | Lead-acid, Gel, AGM (12V) |
| Rozměry (D x Š x V) | 34 cm x 15 cm x 8 cm |
| Hmotnost položky | 1.32 libry (přibližně 0.6 kg) |
| Typ konektoru | Baterie Clamps |
| Mezinárodní kód zboží (EAN) | 04006825640328 |
8. Záruka a podpora
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webmísto.
It is recommended to register your product for warranty purposes, which may extend the warranty period (e.g., to 3 years as mentioned in some product information). Keep your proof of purchase for any warranty claims.
Zákaznická podpora
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Contact details can typically be found on the official Einhell webwebu nebo v dokumentaci k produktu.
Při kontaktování podpory si prosím připravte následující informace:
- Product Model: CE-BC 6 M
- Číslo artiklu: 1002235
- Datum nákupu
- popis problému
