Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Bezpečnostní informace

• Před instalací a provozem si pečlivě přečtěte všechny pokyny.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Udržujte zařízení mimo dosah dětí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x montážní držák
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Konec produktuview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Obrázek 1: Přední view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Klíčové komponenty:

• PIR čočka: Detects infrared radiation from moving bodies.
• LED indikátor: Provides status feedback (e.g., detection, low battery).
• Přihrádka na baterie: Obsahuje zdroj energie.
• Montážní body: For secure installation on a wall.
• Tamper přepínač: Triggers an alarm if the sensor cover is opened.

5. Nastavení

5.1. Instalace baterie

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Montáž senzoru

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Použijte montážní držák jako šablonu pro označení pozic šroubů na stěně.
3. Vyvrtejte otvory na vyznačených místech a vložte do nich hmoždinky.
4. Připevněte montážní držák ke zdi pomocí dodaných šroubů.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Obsluha senzoru

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Stav indikátoru LED

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Žádné světlo: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Údržba

7.1. Čištění

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Výměna baterie

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Pravidelné kontroly

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Řešení problémů

9. Specifikace

• Značka: Intelbras
• Model: IVP2000SF
• Zdroj napájení: Napájení z baterie
• Typ baterie: Alkalický
• Typ montáže: Držák na stěnu
• Kompatibilní zařízení: Intelbras security systems and smart home hubs
• Rozměry produktu: Přibližně 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 palce)
• Metoda detekce: Pasivní infračervené (PIR)
• Rozsah detekce: Až 12 metrů (39 stop)
• Detekční úhel: Přibližně 90 stupňů
• Provozní prostředí: Pouze pro vnitřní použití

10. Informace o záruce

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webwebu nebo kontaktujte jejich zákaznickou podporu. Uschovejte si doklad o koupi pro případ reklamace.

11. Podpora

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webmísto: Visit the official Intelbras webweb s zdrojovými zdroji podpory, častými dotazy a kontaktními informacemi.
• Telefon: Refer to the contact section on the Intelbras webweb s místními čísly podpory.