SuperATV Heavy Duty Rear Bumper Instruction Manual

1. Bezpečnostní informace

Please read and understand all instructions and warnings before installation and use of this product. Failure to follow these instructions may result in serious injury or property damage.

• Během instalace vždy používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí a rukavic.
• Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged before beginning installation.
• Do not modify the bumper or any components. Modifications may compromise the product's integrity and void the warranty.
• Verify that the bumper is securely fastened before operating the vehicle. Regularly inspect all hardware for tightness.
• This bumper is designed for 2017-2021 Polaris Ranger XP 1000 and XP 1000 Crew models. Confirm vehicle compatibility before installation.
• Note: This bumper does NOT work with rear-mounted mufflers (OE # 1263719).

2. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny níže uvedené komponenty přítomny a nepoškozené.

• Main Rear Bumper Bar (1)
• Mounting Brackets (Various, specific to vehicle frame)
• Side Extension Pieces (2)
• Hardware Kit (Bolts, Washers, Nuts)

Figure 1: All components included in the SuperATV Heavy Duty Rear Bumper package.

3. Instalační příručka

3.1. Požadované nástroje

• Wrench Set (Metric and/or Imperial, as needed for hardware)
• Socket Set (Matching wrench sizes)
• Screwdriver (Phillips or Flathead, as needed)
• Torque Wrench (Recommended for final tightening)

3.2. Postup instalace

1. Vybalení a identifikace součástí: Carefully remove all components from the packaging. Lay them out and compare with the package contents list and Figure 1 to ensure all parts are present.
2. Assembling the Bumper Components:
   • Attach the side extension pieces to the main bumper bar using the provided hardware. Do not fully tighten the bolts at this stage; leave them loose enough for adjustment.
   • Secure the mounting brackets to the main bumper bar. Again, hand-tighten only.

   Video 1: Assembly of the Heavy Duty Rear Bumper components. This video demonstrates how to connect the various parts of the bumper before mounting it to the vehicle.
3. Příprava vozidla: If your vehicle has an existing rear bumper or any components that interfere with the new bumper's installation, carefully remove them according to your vehicle's service manual.
4. Mounting the Bumper to the Vehicle:
   • Carefully lift the assembled bumper and align the mounting brackets with the designated attachment points on your Polaris Ranger's frame.
   • Insert the remaining hardware through the mounting brackets and into the vehicle's frame. Hand-tighten all bolts to allow for final adjustments.
   • Adjust the bumper's position to ensure it is level and properly aligned with the vehicle's rear end.
   • Once satisfied with the alignment, securely tighten all bolts using appropriate tools. Refer to your vehicle's specifications for torque settings if available.

   Video 2: Installation process of a similar rear bumper on a Polaris Ranger XP 1000. This video provides visual guidance on mounting the bumper to the vehicle's frame.

   

   Obrázek 2: Zadní view of the SuperATV Heavy Duty Rear Bumper installed on a Polaris Ranger XP 1000.
   

   Obrázek 3: Strana view of the installed bumper, demonstrating its protective coverage.

5. Závěrečná kontrola: After tightening all hardware, perform a final visual inspection to ensure all components are correctly installed and secure. Check for any obstructions or interference with vehicle operation, including the dump bed or tailgate function.

4. Provoz

The SuperATV Heavy Duty Rear Bumper provides enhanced protection for the rear end of your Polaris Ranger. Its robust design shields vulnerable plastics, suspension components, and tail lights from impacts encountered during off-road use or work tasks. The bumper is also winch-ready, offering a secure mounting point for a winch (not included) to assist with recovery or towing operations.

Figure 4: The SuperATV Heavy Duty Rear Bumper providing robust protection.

5. Údržba

To ensure the longevity and performance of your SuperATV Heavy Duty Rear Bumper, regular maintenance is recommended:

• Čištění: Regularly clean the bumper with mild soap and water to remove dirt, mud, and debris. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
• Inspekce: Periodically inspect the bumper for any signs of damage, such as dents, cracks, or rust. Check all mounting hardware for tightness and re-tighten if necessary.
• Práškové lakování: The bumper features a UV-resistant powder coating. If the coating becomes chipped or scratched, touch it up with appropriate paint to prevent rust and maintain appearance.

6. Řešení problémů

• Bumper Does Not Fit:
  • Verify your vehicle's make, model, and year (2017-2021 Polaris Ranger XP 1000 / XP 1000 Crew).
  • Ensure that your vehicle does not have a rear-mounted muffler (OE # 1263719), as this bumper is not compatible with such configurations.
  • Double-check that all original vehicle components that might interfere with the bumper have been correctly removed.
• Volné uchycení po instalaci:
  • Ensure all mounting bolts are fully tightened to the recommended torque specifications.
  • Inspect for any missing washers or nuts that might prevent a secure fit.
• Chybějící díly nebo hardware:
  • If any parts or hardware are missing from your package, contact SuperATV customer support immediately for assistance.

7. Specifikace

8. Záruka a podpora

For detailed warranty information and customer support, please refer to the official SuperATV webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

SuperATV is committed to providing high-quality products and excellent customer service. If you encounter any issues or have questions regarding your Heavy Duty Rear Bumper, do not hesitate to reach out to their support team.