WALI Dual Monitor Gas Spring Desk Mount

Zavedení

Thank you for choosing the WALI Dual Monitor Gas Spring Desk Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.

This mount is designed to support two monitors up to 35 inches each, with a maximum weight capacity of 33 lbs per screen. It features a gas spring system for easy height adjustment and offers various articulation options for optimal viewpohodlí.

Bezpečnostní informace

• Přečtěte si všechny pokyny: Ensure you understand all instructions and warnings before installation. If you have any questions, contact WALI customer support.
• Nosnost: Do not exceed the maximum weight capacity of 33 lbs (15 kg) per screen. Exceeding this limit may result in serious injury or property damage.
• Velikost monitoru: This mount is suitable for monitors up to 35 inches.
• Kompatibilita VESA: Ensure your monitor has VESA mounting holes of 75x75mm or 100x100mm.
• Tloušťka stolu: Verify your desk thickness is compatible with the chosen mounting method (C-Clamp: 0.4" to 3.3" thick; Grommet Base: 0.4" to 1.9" thick).
• Shromáždění: Assemble the product according to the instructions. Improper assembly can lead to damage or injury.
• Pohyblivé části: Be aware of moving parts during adjustment to avoid pinching.
• Pravidelné kontroly: Pravidelně kontrolujte, zda je držák bezpečně upevněn a zda jsou všechny upevňovací prvky pevně utažené.

Obsah balení

Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny:

• WALI Dual Monitor Gas Spring Desk Mount x 1
• Sada montážního hardwaru x 1 (obsahuje různé šrouby, podložky a imbusové klíče)
• Návod k použití x 1

Nastavení a instalace

This mount offers two installation options: C-Clamp and Grommet Base. Choose the method best suited for your desk.

Image: C-Clamp and Grommet Base options. The C-clamp secures to the edge of the desk, while the grommet base uses an existing hole in the desk.

Image: Detachable VESA plate. This plate attaches to the back of your monitor and then slides onto the arm for easy installation and removal.

1. Choose Mounting Method

• C-Clamp Instalace: Připojte C-clamp components to the main pole. Position the clamp on the edge of your desk and tighten the screws until secure. Ensure the desk thickness is between 0.4 and 3.3 inches.
• Instalace základny průchodky: If your desk has a grommet hole (0.4 to 1.9 inches thick), use the grommet base components. Insert the pole through the hole and secure it from underneath the desk with the provided plate and nut.

2. Připevnění desek VESA k monitorům

• Select the appropriate screws (M4 or M5) and washers from the hardware kit that fit your monitor's VESA holes.
• Carefully attach the detachable VESA plates to the back of each monitor. Do not overtighten.

3. Připevněte monitory k ramenům

• Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
• Ensure the monitor is securely locked in place.

Provoz a seřízení

The WALI Dual Monitor Gas Spring Desk Mount offers a range of adjustments for ergonomic positioning.

Image: Dynamic Height Adjustability. The arm can extend up to 20.71 inches horizontally and reach a maximum height of 23.03 inches.

Image: Gas Spring Tension Adjustment. Turn clockwise for lighter monitors to decrease tension, and counter-clockwise for heavier monitors to increase tension.

Image: Safety Screw Adjustment. Tighten the screw to limit the swivel angle to 180° for heavy monitors, preventing tipping. Loosen or remove for a full 360° swivel.

Image: Fully assembled WALI Dual Monitor Mount. This image demonstrates the mount's ability to hold two monitors side-by-side, providing a clean and ergonomic workspace.

1. Height Adjustment (Gas Spring)

• To adjust the monitor height, simply push or pull the monitor to the desired position. The gas spring will hold it in place.
• If the monitor sags or rises too easily, adjust the gas spring tension screw on the arm (see image above). Turn ve směru hodinových ručiček (-) for lighter monitors (to decrease tension) and proti směru hodinových ručiček (+) for heavier monitors (to increase tension). Adjust until the monitor stays at the desired height.

2. Nastavení sklonu

• Monitor lze naklonit o +45° až -45° pro snížení odlesků a optimalizaci viewing angles. Loosen the tilt screw, adjust, and then re-tighten.

3. Nastavení otočení

• The monitor arms can swivel +90° to -90° at the base and at the monitor connection point.
• A safety screw adjustment is available to limit the swivel angle to 180° for heavy monitors, preventing accidental tipping. Loosen or remove this screw for a full 360° swivel range.

4. Rotate Adjustment

• Rotate the monitor +90° to -90° to switch between landscape and portrait modes.

5. Správa kabelů

• Utilize the integrated cable management clips along the arms to route and hide messy wires, maintaining a clean workspace.

Údržba

• Čištění: Očistěte držák měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
• Plynová pružina: The gas spring is designed for long-term use and generally requires no maintenance. If adjustment becomes difficult, re-check the tension setting.

Odstraňování problémů

• Monitor Sags/Doesn't Hold Position: The gas spring tension may be too low for the monitor's weight. Turn the gas spring tension screw proti směru hodinových ručiček (+) ke zvýšení napětí.
• Monitor Rises Too Easily/Hard to Push Down: The gas spring tension may be too high for the monitor's weight. Turn the gas spring tension screw ve směru hodinových ručiček (-) to decrease tension.
• Vibrace monitoru: Ensure all mounting screws (desk clamp/grommet, VESA plate, arm connections) are securely tightened.
• Limited Swivel Range: Check the safety screw adjustment on the arm. If tightened, it limits swivel to 180°. Loosen or remove it for a full 360° range.
• Difficulty with Tilt: Loosen the tilt adjustment screw, adjust the monitor, and then re-tighten the screw firmly.

Specifikace

Záruka a podpora

WALI provides experienced and friendly US-based customer support available to assist 7 days a week. For any questions, missing parts, or issues, please contact WALI customer service directly.

Please refer to the product packaging or WALI's official webPodrobnosti o záruce a kontaktní informace naleznete na webových stránkách.