Uživatelská příručka k chytrému POS terminálu SUNMI T2 s integrovanou tiskárnou

1. Úvod

This manual provides essential instructions for the setup, operation, and maintenance of your SUNMI T2 Smart POS Terminal. The T2 is an integrated point-of-sale device featuring a 15.6-inch Full HD touch screen and a built-in thermal printer, designed for various commercial applications.

2. Konec produktuview

2.1 Součásti zařízení

The SUNMI T2 terminal integrates a high-resolution display, a powerful processor, and a thermal printer into a single unit. Key components include:

• 15.6-inch Full HD Touch Screen (1920x1080)
• Integrated Thermal Printer (80mm paper width, 200mm/s print speed)
• Base Unit with connectivity ports
• Vstup napájení

Obrázek 2.1: Přední strana view of the SUNMI T2 Smart POS Terminal. The 15.6-inch touch screen is visible, displaying various application icons, indicating its Android operating system interface.

Obrázek 2.2: Strana view of the SUNMI T2 terminal, illustrating the design of the stand and the adjustable angle of the main display unit.

2.2 Obsah balení

Po vybalení zkontrolujte, zda jsou přítomny všechny položky:

• SUNMI T2 Printer (T2 model)
• Napájecí kabel
• Uživatelská příručka (tento dokument)

3. Pokyny k nastavení

3.1 Vybalení a umístění

1. Carefully remove the SUNMI T2 terminal from its packaging.
2. Place the device on a stable, flat surface, ensuring adequate ventilation around the unit.
3. Avoid placing the device near heat sources, direct sunlight, or in areas with high humidity or dust.

3.2 Připojení napájení

1. Connect the provided power cable to the power input port located at the rear of the device base.
2. Zapojte druhý konec napájecího kabelu do standardní elektrické zásuvky.
3. The device will typically power on automatically or can be powered on using the power button.

3.3 Počáteční zapnutí a konfigurace

1. Press and hold the power button (refer to Section 5.1 for button location) until the screen illuminates.
2. Follow the on-screen prompts to complete the initial setup, including language selection, Wi-Fi connection, and time zone settings.
3. Connect to your local network via Wi-Fi or Ethernet (if available) to ensure proper functionality and updates.

4. Návod k obsluze

4.1 Ovládání dotykové obrazovky

The SUNMI T2 features a capacitive multi-touch screen. Operate the device using standard touch gestures:

• Klepněte na: Vyberte položky nebo aktivujte funkce.
• Výpad: Navigate through menus or scroll content.
• Přiblížení roztažením/roztažením prstů: Adjust the size of on-screen content.

4.2 Integrated Printer Operation

The T2 includes an 80mm thermal printer for receipts and order tickets.

4.2.1 Vkládání papíru do tiskárny

1. Locate the printer cover on the front of the device base.
2. Press the release button or latch to open the printer cover.
3. Insert a new roll of 80mm thermal paper, ensuring the paper feeds from the bottom and the leading edge extends slightly out of the printer slot.
4. Pevně ​​zavřete kryt tiskárny, dokud nezacvakne na místo.
5. Odtrhněte přebytečný papír.

Obrázek 4.1: Detailní view of the integrated thermal printer compartment with the cover open, illustrating the correct method for inserting a new 80mm thermal paper roll.

Obrázek 4.2: Vnitřní view of the SUNMI T2's thermal printer mechanism, highlighting its design for efficient paper handling and high-speed printing up to 200mm/s.

4.2.2 Printing Receipts

Once paper is loaded, the printer will automatically activate when a print command is issued from your POS software application. Ensure your application is correctly configured to use the integrated printer.

4.3 Konektivita

The SUNMI T2 supports various connectivity options:

• Wi-Fi: 2.4G/5G (IEEE 802.11 a/b/g/n) for wireless network access.
• Bluetooth: Supports Bluetooth 2.1/3.0/4.0 (BLE) for connecting peripherals.
• USB porty: USB Type A port x1, USB 3.1 Type C x1, USB 2.0 x2 (total 3 USB ports).
• RJ11: Cash drawer port x1.
• RJ45: LAN port x1 for wired network connection.
• Sluchátkový jack: 3.5mm audio výstup.
• Micro-USB: Debug port x1.

Connect external devices such as barcode scanners, external keyboards, or cash drawers to the appropriate ports as needed.

5. Údržba

5.1 Čištění zařízení

• Power off the device and disconnect the power cable before cleaning.
• Použijte měkký hadřík, který nepouští vlákna dampened with water or a mild, non-abrasive cleaner to wipe the screen and exterior surfaces.
• Do not use harsh chemicals, abrasive pads, or excessive moisture.
• For the thermal printer head, use a specialized thermal printer cleaning pen or card to ensure optimal print quality.

5.2 Aktualizace softwaru

Regularly check for and install software updates for the SUNMI OS and your POS application to ensure optimal performance, security, and access to new features. Updates can typically be found in the device's settings menu or through your POS software provider.

6. Řešení problémů

6.1 Běžné problémy a řešení

• Zařízení se nezapne:
  • Ensure the power cable is securely connected to both the device and a working electrical outlet.
  • Zkontrolujte, zda je elektrická zásuvka funkční.
  • Zkuste stisknout a podržet tlačítko napájení po dobu 10-15 sekund.
• Obrazovka nereaguje:
  • Restartujte zařízení.
  • Ujistěte se, že je obrazovka čistá a bez nečistot.
• Printer is not printing:
  • Check if thermal paper is loaded correctly and not jammed.
  • Ensure the printer cover is securely closed.
  • Verify that the POS application is sending print commands and is configured for the integrated printer.
  • Restartujte zařízení.
• No network connection (Wi-Fi/Ethernet):
  • Check Wi-Fi settings and ensure you are connected to the correct network.
  • For Ethernet, ensure the cable is securely connected to the RJ45 port and your router/switch.
  • Restart your network equipment (router/modem).

If issues persist, refer to the support section or contact your vendor.

7. Specifikace

The following table details the technical specifications of the SUNMI T2 Smart POS Terminal:

Obrázek 7.1: Přesview of SUNMI T2 Technical Specifications, detailing hardware and software components.

8. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the vendor/manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Kunxilin Electronic CO. (Brand: SUNMI)