1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of the Geberit Duofix Bidet Frame, model 111.512.00.2. This self-supporting frame is designed for secure mounting of bidets in various bathroom constructions.
The Geberit Duofix Bidet Frame is engineered for reliability and ease of installation, suitable for both construction walls and light walls. It features a frame height of 112 cm and is compatible with bidets having 18 cm or 23 cm fixing distances.
Figure 1: The Geberit Duofix Bidet Frame, a blue metal frame designed for wall-mounted bidet installations.
2. Bezpečnostní informace
Před instalací a použitím si pečlivě přečtěte všechny pokyny. Nedodržení těchto pokynů může vést k poškození majetku nebo zranění.
- Installation should be performed by a qualified professional or a person with adequate plumbing and construction knowledge.
- Ensure all local building codes and plumbing regulations are followed during installation.
- Během instalace používejte vhodné osobní ochranné prostředky (OOP), jako jsou rukavice a ochrana očí.
- Verify that the wall structure can support the weight of the bidet frame, bidet, and user.
- Do not modify the frame or its components. Use only original Geberit parts.
- Ujistěte se, že všechna spojení jsou vodotěsná, aby nedošlo k únikům.
3. Obsah balení
Opatrně vybalte krabici a ujistěte se, že jsou v ní přítomny všechny následující položky:
- 1x Geberit Duofix Bidet Frame (blue primer)
- 2x M12 threaded rods for ceramic fixing
- 2x Connections R 1/2"
- 1x Drain elbow ø 50 mm
- 1x Gasket ø 44/40 mm
- Fixing material (for frame installation)
4. Nastavení a instalace
The Geberit Duofix Bidet Frame is designed for flexible installation. Follow these steps for proper setup:
- Příprava:
- Determine the installation location. The frame is suitable for installation on construction walls or light walls.
- Ensure the floor structure is between 0-20 cm for proper frame adjustment.
- Confirm compatibility with your bidet, ensuring the fixing distances are either 18 cm or 23 cm.
- Umístění rámu:
- Position the self-supporting frame (with C-profile 4x4 cm) at the desired location.
- The frame has holes with a diameter of 9 mm for fixing to construction with a wooden panel, if applicable.
- Nastavení nohou:
- Adjust the galvanized legs to the required height (0-20 cm), using the position marks for accuracy.
- If installing on a finished floor, the support legs are retractable by 5 cm.
- Upevnění na stěnu:
- Secure the frame to the wall using the provided fixing material.
- For UW 50 and UW 75 profiles, utilize the adjustable support plate for secure installation.
- The frame can be tabicared at partial height or full height.
- Vodovodní přípojky:
- Connect the two R 1/2" connections for water supply.
- Install the ø 50 mm drain elbow and the ø 44/40 mm gasket for waste water.
- Ujistěte se, že všechny spoje jsou těsné a těsní.
- Bidet Mounting:
- Once the frame is securely installed and plumbing is complete, mount the bidet using the two M12 threaded rods for ceramic fixing.
- Ensure the bidet is level and securely fastened to the frame.
- This frame is suitable for bidets with countertop faucets.
5. Provoz
The Geberit Duofix Bidet Frame functions as a robust and stable support system for your wall-mounted bidet. Once installed, its operation is integrated with the bidet itself. The frame ensures the bidet is securely anchored to the wall, providing stability and allowing for proper water supply and drainage through the connected plumbing.
There are no user-operable parts on the frame itself after installation. All bidet functions (water flow, temperature, etc.) are controlled directly via the bidet's fixtures.
6. Údržba
Regular maintenance of the Geberit Duofix Bidet Frame is minimal, as it is primarily a structural component. However, periodic checks are recommended to ensure longevity and proper function:
- Čištění: If the frame is exposed (e.g., during construction or before final wall covering), clean it with a damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the blue primer or galvanized surfaces.
- Kontroly těsnosti: Periodically inspect all plumbing connections for any signs of leaks. Address any leaks immediately to prevent water damage.
- Strukturální integrita: Ensure that the bidet remains firmly attached to the frame and that the frame itself shows no signs of loosening from the wall or floor.
- Kontrola součástí: Check for any visible damage or corrosion on the frame or its components. While the frame is designed for durability, extreme conditions or improper installation can affect its integrity.
7. Řešení problémů
This section addresses common issues that may arise during or after the installation of the Geberit Duofix Bidet Frame. For complex issues, it is recommended to consult a qualified plumber or installer.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Bidet feels unstable or wobbly. |
|
|
| Water leak from connections. |
|
|
| Frame height adjustment issues. |
|
|
8. Specifikace
| Výrobce | Geberit |
| Číslo dílu | 111.512.00.2 |
| Číslo modelu položky | 111.512.00.2 |
| Hmotnost položky | 1.1 libry |
| Rozměry produktu | 19.69 x 1.57 x 44.09 palce |
| Barva | Blue (Frame with blue primer) |
| svtage | 100 voltů (Note: This frame is a mechanical component; electrical connection is not typically required for the frame itself.) |
| Wattage | 100 wattů (Note: This frame is a mechanical component; electrical connection is not typically required for the frame itself.) |
| Položka Množství v balení | 1 |
| Zahrnuté komponenty | 2 M12 threaded rods for ceramic fixing, 2 connections R 1/2", Drain elbow ø 50 mm, Frame, Gasket ø 44/40 mm, Fixing material |
| Výška rámu | 112 cm |
| Bidet Fixing Distance | 18 cm nebo 23 cm |
| Floor Structure Compatibility | 0-20 cm |
9. Záruka a podpora
Geberit products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Geberit webmísto.
For technical support, installation queries, or to report any issues, please contact Geberit customer service directly. Contact details can typically be found on the manufacturer's webmístě nebo na obalu produktu.
