Návod k obsluze šejkru BlenderBottle Classic V2

1. Konec produktuview

The BlenderBottle Classic V2 Shaker Bottle is designed for efficient mixing of protein shakes, smoothies, and other nutritional supplements. It features an upgraded design with a rounded base and SpoutGuard for enhanced functionality and hygiene.

Image 1: BlenderBottle Classic V2 Shaker Bottle with BlenderBall.

Klíčové vlastnosti:

• BlenderBall Wire Whisk: Made from 316 surgical-grade stainless steel for superior mixing.
• Design odolný proti úniku: Secure screw-on lid and ergonomic flip cap prevent spills.
• SpoutGuard: Protects the drinking spout from contamination.
• Rounded Base: Ensures thorough mixing and easy cleaning.
• Široká ústa: Facilitates easy addition of ingredients.
• Embossed Markings: Displays both ounces and milliliters for accurate measurement.
• Odolné materiály: BPA- and phthalate-free plastic.

Image 2: Key features of the BlenderBottle Classic V2, including SpoutGuard and rounded base.

2. Součásti

Your BlenderBottle Classic V2 Shaker Bottle includes the following parts:

• BlenderBottle Classic V2 (28-ounce capacity)
• BlenderBall wire whisk
• Screw-on lid with integrated flip cap and SpoutGuard

3. Setup: First Use

Before using your BlenderBottle Classic V2 for the first time, it is recommended to wash all components thoroughly.

1. Disassemble the bottle by removing the lid and the BlenderBall.
2. Wash the bottle, lid, and BlenderBall with warm, soapy water.
3. Všechny součásti důkladně opláchněte, abyste odstranili zbytky mýdla.
4. Před opětovnou montáží nebo uložením nechte všechny díly zcela vyschnout na vzduchu.

4. Operation: Mixing Instructions

Follow these steps to effectively mix your supplements using the BlenderBottle Classic V2:

1. Add Liquids: Pour your desired liquid (water, milk, juice) into the shaker bottle. Use the embossed measurement markings for accuracy.
2. Přidat prášek: Add your protein powder, pre-workout, or other supplement powder.
3. Insert BlenderBall: Place the BlenderBall wire whisk into the bottle.
4. Bezpečné víko: Screw the lid on tightly until it forms a leak-proof seal. Ensure the flip cap is also securely snapped shut.
5. Otřást: Hold the bottle firmly and shake vigorously for 10-20 seconds, or until the contents are thoroughly mixed. The BlenderBall will move freely inside, breaking up clumps.
6. Pití: Open the flip cap using the SpoutGuard feature to avoid touching the drinking spout.

Image 3: The BlenderBall wire whisk, essential for smooth mixing.

Doporučení k použití:

The BlenderBottle Classic V2 is suitable for a variety of mixtures:

• Protein Shakes
• Pre-Workout and Post-Workout Drinks
• Smoothies
• Meal Replacements
• Hydration Powders
• Other powdered supplements

Image 4: Recommended uses for the BlenderBottle Classic V2.

5. Péče a údržba

Proper care ensures the longevity and hygiene of your BlenderBottle Classic V2.

Pokyny pro čištění:

• Vhodné do myčky: All components (bottle, lid, BlenderBall) are top-rack dishwasher safe.
• Mytí rukou: For best results, especially with strong-smelling ingredients, hand wash with warm, soapy water immediately after use. Use a bottle brush for thorough cleaning of the interior.
• Sušení: Allow all parts to dry completely before storing to prevent odors.

Důležité poznámky:

• Do not use abrasive cleaners or scrubbers, as these can damage the bottle's finish.
• Do not microwave the bottle.
• The bottle is made from BPA- and phthalate-free materials.

6. Řešení problémů

If you encounter any issues with your BlenderBottle Classic V2, refer to the following common solutions:

Issue: Leaks from the bottle.

• Řešení 1: Ensure the screw-on lid is tightened completely. A loose lid is the most common cause of leaks.
• Řešení 2: Verify that the flip cap is securely snapped shut. You should hear a distinct click.
• Řešení 3: Check the silicone gasket inside the lid for proper seating and any damage.

Issue: Contents are not mixing smoothly.

• Řešení 1: Confirm that the BlenderBall wire whisk is inside the bottle during mixing.
• Řešení 2: Shake the bottle vigorously for a longer duration (e.g., 20-30 seconds).
• Řešení 3: Add liquid before powder to prevent powder from sticking to the bottom.

7. Specifikace

Image 5: Dimensions of the BlenderBottle Classic V2.

8. Záruka a podpora

BlenderBottle products are designed for durability and performance. This product comes with a manufacturer's limited lifetime warranty.

Informace o záruce:

The manufacturer warrants this product against defects in materials and workmanship under normal use. For specific details regarding warranty coverage, claims, and limitations, please refer to the official BlenderBottle webnebo kontaktujte jejich zákaznickou podporu.

Zákaznická podpora:

For further assistance, product inquiries, or to report any issues not covered in this manual, please visit the official BlenderBottle webwebu nebo se přímo obraťte na jejich oddělení zákaznických služeb.