Uživatelská příručka k základní desce ASRock X570 Phantom Gaming 4

1. Úvod

This manual provides detailed instructions for the installation, configuration, and maintenance of your ASRock X570 Phantom Gaming 4 Motherboard. Please read this manual thoroughly before attempting any installation or configuration to ensure proper operation and to prevent damage to your components.

Figure 1.1: ASRock X570 Phantom Gaming 4 Motherboard and retail packaging.

2. Obsah balení

Ověřte, zda jsou v balení základní desky přítomny všechny níže uvedené položky:

• ASRock X570 Phantom Gaming 4 Motherboard
• 3 x šrouby pro patice M.2
• Uživatelská příručka
• Driver CD (drivers may also be downloaded from the ASRock webweb)
• Datové kabely SATA
• I / O štít

3. Rozložení a funkce základní desky

The ASRock X570 Phantom Gaming 4 Motherboard is designed to support AMD AM4 Socket Ryzen 2000 and 3000 Series processors. It features a 10 Power Phase Design for stable power delivery and supports DDR4 memory up to 4066+ (OC) MHz. For storage, it includes 8 SATA3 6.0 Gb/s connectors with RAID support (RAID 0, RAID 1, RAID 10), NCQ, AHCI, and Hot Plug capabilities. Additionally, it provides 1 Hyper M.2 (PCIe Gen4 x4 & SATA3) and 1 Hyper M.2 (PCIe Gen4 x4) for high-speed SSDs.

Expansion slots include 2 PCIe 4.0 x16, 2 PCIe 4.0 x1, and 1 M.2 (Key E) for WIFI. It supports AMD Quad Crossfire and Crossfire configurations. Graphics output options are available via HDMI and DisplayPort. Connectivity is handled by Intel Gigabit LAN, 2 USB 3.2 Gen2 (Rear Type-A), 10 USB 3.2 Gen1 (4 Front, 6 Rear), and 7.1 CH HD Audio (Realtek ALC1200 Audio Codec) with ELNA Audio Caps. The board also features ASRock Polychrome SYNC for customizable RGB lighting.

Obrázek 3.1: Shora dolů view of the motherboard highlighting key components.

Obrázek 3.2: Úhlové view of the motherboard, showing the I/O shield and various ports.

3.1 Zadní I/O panel

Zadní I/O panel nabízí různé možnosti připojení:

• USB Ports: 2 x USB 3.2 Gen2 (Type-A), 6 x USB 3.2 Gen1 (Type-A), 2 x USB 2.0
• Video Outputs: 1 x HDMI, 1 x DisplayPort
• Network: 1 x RJ-45 LAN Port (Intel Gigabit LAN)
• Audio Jacks: 5 x Audio Jacks (Line In, Line Out, Mic In, C/Sub, Rear), 1 x Optical S/PDIF Out Port
• Other: BIOS Flashback Button

Figure 3.3: Close-up of the rear I/O panel connectors.

4. Nastavení a instalace

This section outlines the general steps for installing components onto your motherboard. Always refer to the detailed instructions in the included user manual for specific component placement and safety guidelines.

4.1 Instalace CPU

Carefully open the CPU socket lever. Align your AMD AM4 processor with the socket, ensuring the golden triangle on the CPU matches the indicator on the socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.

4.2 CPU Cooler Installation

Install your CPU cooler according to its manufacturer's instructions. For stock AMD coolers, ensure the mounting brackets are correctly aligned and secured. Apply thermal paste if your cooler does not come with it pre-applied.

4.3 RAM (Memory) Installation

Open the clips on the DIMM slots. Align your DDR4 memory modules with the slots, ensuring the notch on the module matches the notch in the slot. Press firmly on both ends of the memory module until the clips snap into place. For optimal performance, install memory modules in the recommended dual-channel configuration as indicated in your user manual.

Instalace 4.4 M.2 SSD

Locate the M.2 slots on your motherboard. Remove the retaining screw and standoff. Insert your M.2 SSD into the slot at an angle, then gently push it down and secure it with the standoff and screw. If your M.2 slot includes a heatsink, remove it, install the SSD, and then reattach the heatsink.

4.5 Instalace grafické karty (GPU)

Locate the primary PCIe 4.0 x16 slot. Open the retention clip at the end of the slot. Align your graphics card with the slot and press firmly until it is fully seated and the retention clip locks into place. Secure the graphics card to your case with screws.

5. Návod k obsluze

After assembling your system, connect your display, keyboard, mouse, and power supply. Power on your system. The motherboard will perform a Power-On Self-Test (POST). You may need to enter the BIOS/UEFI setup to configure boot order, enable XMP for memory, or adjust other system settings. Refer to the ASRock website for the latest BIOS updates and detailed BIOS configuration guides.

6. Údržba

Regular maintenance helps ensure the longevity and optimal performance of your motherboard and system. Keep your system clean by regularly dusting internal components, especially fans and heatsinks. Ensure proper airflow within your PC case. Periodically check for and install the latest BIOS/UEFI updates and driver updates from the ASRock webmísto.

7. Řešení problémů

If you encounter issues with your motherboard, consult the troubleshooting section of the included user manual. Common issues often relate to incorrect component installation, power supply problems, or outdated BIOS/drivers. Ensure all cables are securely connected and components are properly seated. If problems persist, refer to the ASRock support webnebo kontaktujte zákaznický servis.

8. Specifikace

9. Záruka a podpora

For warranty information, please refer to the warranty card included in your product package or visit the official ASRock website. For technical support, driver downloads, and further assistance, please visit the ASRock support page at www.asrock.com/support.