X-PRO 396-999074

X-PRO 19" Front Wheel Rim Tire Assembly User Manual

Model: 396-999074

Konec produktuview

This manual provides essential information for the installation, operation, and maintenance of your X-PRO 19" Front Wheel Rim Tire Assembly. Please read thoroughly before use.

X-PRO 19 inch front wheel rim tire assembly

Figure 1: Complete X-PRO 19" Front Wheel Rim Tire Assembly.

Úhlové view of X-PRO 19 inch front wheel

Obrázek 2: Úhlové view showcasing the rim, spokes, and tire tread.

Klíčové vlastnosti:

  • Brand new 19" front wheel rim tire assembly.
  • Designed specifically for disc brake systems.
  • Tire size: 70/100-19.
  • Compatible with 15mm axles.
  • Features a durable iron hub.
  • Includes tire, inner tube, and rim.

Kompatibilita a důležité poznámky

This front wheel assembly is designed for dirt bikes. It is crucial to verify compatibility with your specific vehicle model before installation. This wheel is only compatible with disc brake systems.

Important: Additional modifications may be necessary for proper fitment on some vehicles. Compatibility is not guaranteed for all models.

Measurements for Compatibility:

  • Brake rotor center hole diameter: 100mm.
  • Brake rotor inner diameter (ID): 76mm.
Close-up of tire size marking 70/100-19

Figure 3: Close-up of the tire sidewall showing the 70/100-19 size marking.

Close-up of the 15mm bearing assembly in the hub

Figure 4: Detail of the wheel hub, showing the integrated 15mm bearing assembly.

Measurement of brake rotor center hole diameter 100mm

Figure 5: Digital caliper measuring the brake rotor center hole diameter at 100mm.

Measurement of brake rotor inner diameter 76mm

Figure 6: Digital caliper measuring the brake rotor inner diameter at 76mm.

Nastavení a instalace

Proper installation is critical for safety and performance. If you are unsure about any step, consult a qualified mechanic.

Požadované nástroje (nejsou součástí dodávky):

  • Wrenches appropriate for axle nuts and brake caliper bolts.
  • Momentový klíč.
  • Bike stand or lift.
  • Grease for axle and bearings.

Kroky instalace:

  1. Příprava motocyklu: Securely place the dirt bike on a stand, ensuring the front wheel is off the ground and stable.
  2. Remove Old Wheel (if applicable): Loosen and remove the front axle nut. Carefully slide out the axle. Support the old wheel as it is removed from the fork. Detach the brake caliper from its mounting bracket if necessary, ensuring it does not hang by the brake line.
  3. Inspect New Wheel: Before installation, inspect the new X-PRO wheel for any shipping damage. Verify the tire is properly seated on the rim and inflated to the recommended pressure (refer to tire sidewall for maximum pressure, adjust for riding conditions).
  4. Install Brake Rotor (if not pre-installed): If your brake rotor is separate, align it with the mounting holes on the wheel hub and secure it with appropriate bolts. Ensure bolts are torqued to manufacturer specifications.
  5. Position New Wheel: Carefully lift the new wheel into the front forks, aligning the brake rotor with the brake caliper. Ensure the wheel spacers (if applicable) are correctly positioned on each side of the hub.
  6. Insert Axle: Apply a thin layer of grease to the axle. Slide the axle through the fork leg, wheel hub, and the other fork leg. Ensure all components are aligned.
  7. Utažení matice nápravy: Install and tighten the axle nut to the motorcycle manufacturer's specified torque. Do not overtighten.
  8. Reattach Brake Caliper: Reattach the brake caliper to its mounting bracket on the fork. Torque the caliper bolts to specifications.
  9. Závěrečné kontroly: Spin the wheel to ensure it rotates freely without rubbing. Check brake operation. Pump the front brake lever several times to ensure proper brake pad engagement.

Provozní úvahy

Once installed, the X-PRO front wheel assembly is ready for use. Always adhere to safe riding practices and local regulations.

Tlak v pneumatikách:

Maintain correct tire pressure as specified by your motorcycle manufacturer or the tire's sidewall. Incorrect pressure can affect handling, tire wear, and safety.

Brzdový systém:

Ensure your disc brake system is functioning optimally. Regularly check brake fluid levels, pad wear, and rotor condition.

Údržba

Regular maintenance will extend the life of your wheel assembly and ensure safe operation.

Rutinní kontroly:

  • Stav pneumatik: Inspect the tire for cuts, punctures, excessive wear, or cracks before each ride. Check tread depth.
  • Napětí paprsků: Periodically check spoke tension. Loose spokes can lead to wheel instability and damage. If spokes are loose, have them tightened by a professional.
  • Bearing Play: Check for any excessive play in the wheel bearings. If play is detected, bearings may need to be replaced.
  • Rim Condition: Inspect the rim for dents, cracks, or bends, especially after impacts.
  • Brzdový kotouč: Check the brake rotor for warping, excessive wear, or damage.

Čištění:

Clean the wheel assembly with mild soap and water. Avoid harsh chemicals that can damage the tire or finish.

Odstraňování problémů

This section addresses common issues you might encounter with your front wheel assembly.

ProblémMožná příčinaŘešení
Wheel wobbles or feels looseLoose axle nut, worn wheel bearings, loose spokes, bent rim.Check and tighten axle nut. Inspect and replace bearings if worn. Have spokes tensioned by a professional. Inspect rim for damage.
Brake rubbing or inconsistent brakingMisaligned brake caliper, warped brake rotor, worn brake pads.Realign brake caliper. Inspect and replace warped rotor. Replace worn brake pads.
Pneumatika rychle ztrácí vzduchPuncture, faulty valve stem, improperly seated tire bead.Inspect tire for punctures and repair/replace. Check valve stem. Ensure tire bead is fully seated.

Specifikace

AtributDetail
ZnačkaX-PRO
Číslo modelu396-999074
Velikost kola19 palce
Velikost pneumatiky70/100-19
Axle Compatibility15 mm
Kompatibilita typů brzdKotoučová brzda
Brake Rotor Center Hole Diameter100 mm
Brake Rotor Inner Diameter (ID)76 mm
Materiál nábojeŽelezo
Index zatížení50
Hloubka běhounu15 milimetrů
BarvaKovový
UPC754169629045
Země původuČína

Záruka a podpora

For warranty information and customer support, please refer to the official X-PRO webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případ reklamace.

Výrobce: X-PRO

Kontakt: Navštivte X-PRO Store on Amazon další informace a zdroje podpory.

Související dokumenty - 396-999074

Předview Uživatelská příručka k dvoutaktnímu terénnímu motocyklu X-PRO 50cc
Komplexní návod k obsluze pro dvoutaktní terénní motorku X-PRO 50 ccm, který zahrnuje informace o bezpečnosti, montáži, provozu, údržbě, řešení problémů a záruce. Určeno pouze pro soutěžní použití.
Předview Stručný průvodce a tipy pro motocykl X-PRO
Základní stručný návod a tipy pro motocykly X-PRO, včetně rad k montáži, doporučení k údržbě a informací o záruce.
Předview Tipy pro nastavení a obsluhu omezovače rychlosti pro čtyřkolky X-PRO
Stručný návod od X-PRO, jak nastavit omezovač rychlosti na vaší čtyřkolce (model HS110A-A/ATV-D02), spolu se základními tipy pro bezpečné a správné používání. Včetně kontaktních informací na podporu.
Předview Tipy pro nastavení a obsluhu omezovače rychlosti pro čtyřkolky X-PRO
Naučte se, jak nastavit omezovač rychlosti na čtyřkolce X-PRO (CT110-2/ATV-P012), a najděte základní tipy pro bezpečný a optimální provoz. Zahrnuje pokyny k výměně oleje, baterii a dalším informacím.
Předview Pneumatiky Michelin pro obytné vozy: Průvodce správným používáním, údržbou a informacemi
Komplexní průvodce od společnosti Michelin pro výběr pneumatik pro obytné vozy, jejich správné použití, údržbu, bezpečnost a řešení problémů. Seznamte se s huštěním, opotřebením, běžnými poškozeními, postupy vážení a zátěžovými grafy pro optimální výkon a dlouhou životnost obytného vozu.
Předview Seznam kompatibilních objektivů Viltrox AF 15mm F1.7 XF v1.0.1
Průvodce kompatibilitou objektivů Viltrox AF 15mm F1.7 XF pro fotoaparáty Fujifilm s bajonetem X. Zkontrolujte model fotoaparátu a kompatibilitu firmwaru pro režimy fotografování a videa.