Mounting Dream MD2296-24K Full Motion TV Wall Mount Instruction Manual

1. Konec produktuview

This manual provides detailed instructions for the safe and proper installation and operation of your Mounting Dream MD2296-24K Full Motion TV Wall Mount. This mount is designed to securely hold most 42-84 inch flat or curved screen televisions weighing up to 100 LBS (45.3 kg).

The full motion design allows for optimal viewing angles with tilt, swivel, and extension capabilities. Please read all instructions carefully before beginning installation.

Bezpečnostní informace

• VAROVÁNÍ: Do not install this product into drywall alone. It must be mounted into solid concrete walls or wood studs.
• Ujistěte se, že konstrukce stěny bezpečně unese celkovou hmotnost držáku a televizoru.
• Pro přesné nalezení dřevěných trámů vždy používejte detektor trámů.
• Two people are recommended for safe installation, especially when lifting the television.
• Do not exceed the maximum weight capacity of 100 LBS (45.3 kg).

2. Obsah balení

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Mounting Dream customer service.

Obraz: Nadview of the Mounting Dream MD2296-24K TV Wall Mount and included hardware. This image displays the main wall plate, articulating arms, TV brackets, and various screws, washers, spacers, a small level, and cable ties.

Included Hardware (Example)

• Sestava nástěnné desky
• Ramena držáků televizorů (2)
• Lag Bolts (for wood studs/concrete)
• Concrete Anchors (may require separate request from Mounting Dream)
• Assorted TV Screws (M4, M6, M8)
• Podložky a rozpěrky
• Úroveň bublin
• Stahovací pásky
• Montážní šablona

3. Kontrola kompatibility

Before installation, confirm that this mount is compatible with your television and wall type.

Obraz: Visual guide for checking TV mount compatibility, illustrating VESA pattern, TV weight and size, potential port blockage, and suitable wall types.

Specifikace TV

• Velikost televizoru: Most 42-84 inch OLED/LED/Plasma/Curved TVs.
• Nosnost: Maximum 100 LBS (45.3 kg).
• Kompatibilita VESA: Max VESA 600x400mm (24"x16"). Common VESA patterns supported include 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x300mm, 600x200mm, 600x400mm.
• Blokované vstupy: Check the location of your TV's input ports to ensure the mount will not block them.

Kompatibilita typů stěn

Obraz: Illustration of compatible wall types: solid concrete wall, wood stud wall (16", 18", 24" spacing), and brick wall. A warning indicates not to mount on drywall alone.

• Dřevěné stěny s nosníky: Compatible with 16", 18", and 24" wood stud spacing.
• Masivní betonové stěny: Requires appropriate concrete anchors (contact Mounting Dream for these if not included).
• Cihlové zdi: Requires appropriate anchors (contact Mounting Dream for these if not included).
• DŮLEŽITÉ: This TV mounting bracket is NE for drywall alone.

4. Nastavení a instalace

Follow these steps carefully for a secure installation. It is highly recommended to have a second person assist with the installation, especially when lifting the TV.

Požadované nástroje (nejsou součástí dodávky)

• Power Drill
• Šroubovák s křížovou hlavou
• Ratchet Set (for lag bolts)
• Vyhledávač cvočků
• Tužka
• Měřicí páska
• Ochranné brýle

Kroky instalace

Obraz: Simplified 3-step installation process: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.

1. Determine TV Placement: Decide the desired height and horizontal position for your TV. Use painter's tape to outline the TV's position on the wall for visual reference.
2. Vyhledejte nástěnné sloupky: Use a stud finder to accurately locate the center of the wood studs in your desired mounting area. Mark the stud locations with a pencil. For concrete or brick walls, ensure you have the correct anchors and drill bits.
3. Připevnění držáků televizoru k televizoru: Carefully place your TV face down on a soft, clean surface. Attach the vertical TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are centered and securely fastened.
4. Position and Mark Wall Plate: Hold the wall plate assembly against the wall at your desired height, aligning it with the marked stud centers. Use the provided mounting template if available. Use the included bubble level to ensure the wall plate is perfectly horizontal. Mark the drilling points for the lag bolts.
5. Vrtací pilotní otvory: Using a power drill, drill pilot holes at the marked locations. For wood studs, follow the recommended drill bit size in the instructions. For concrete/brick, use a masonry drill bit and ensure the holes are deep enough for the anchors.
6. Instalace nástěnné desky: Secure the wall plate assembly to the wall using the lag bolts and washers. Tighten them firmly with a ratchet set, but do not overtighten.
7. Test Wall Mount: Before hanging the TV, extend the articulating arms and apply gentle downward pressure to ensure the mount is securely fastened to the wall.
8. Zavěste televizi: With the help of a second person, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is properly seated and secure.
9. Zajištění televizoru k upevnění: Locate the safety screws or clips on the TV brackets and tighten them to prevent the TV from accidentally lifting off the wall plate.

5. Obsluha a seřízení

Your Mounting Dream MD2296-24K mount offers various adjustments to achieve the optimal viewzkušenosti.

Flexible Extension and Retraction

Obraz: Diagram showing the TV mount extending up to 16.7 inches from the wall and retracting to 2.6 inches, illustrating its flexible positioning.

Gently pull the TV away from the wall to extend the articulating arms. Push the TV back towards the wall to retract it. The mount extends up to 16.7 inches and retracts to 2.6 inches from the wall.

Nastavení sklonu

Obraz: Visual representation of the TV mount's tilt range, from +5 degrees upward to -15 degrees downward, designed to reduce screen glare.

The mount allows for a tilt range of +5° (upward) to -15° (downward). Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to the desired angle, and then securely tighten the knobs/bolts.

Otočné nastavení

Obraz: Depiction of the TV mount's swivel capability, allowing the TV to rotate up to +/-45 degrees horizontally for viewz různých pozic.

The articulating arms allow the TV to swivel up to 45° left or right. Gently push or pull the TV to the desired horizontal viewúhel.

Nastavení úrovně

Obraz: Illustration of the TV mount's post-installation level adjustment feature, allowing for a fine-tuning of +/-4 degrees to correct any slight tilt after mounting.

If the TV is not perfectly level after installation, you can adjust it by ±4°. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then retighten the screws.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

• Pravidelná prohlídka: Every few months, check all screws and bolts to ensure they are securely tightened.
• Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Mazání: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints.

7. Řešení problémů

If you encounter issues during or after installation, refer to the following common solutions.

• Televizor není vodorovně umístěn: Use the ±4° level adjustment feature as described in Section 5. Ensure the wall plate was installed level initially.
• Držák se na zdi zdá být uvolněný: Re-check all lag bolts securing the wall plate to the wall. Ensure they are tightened into solid wood studs or concrete with appropriate anchors.
• Televizor se obtížně přemisťuje/nastavuje: Check for any overtightened bolts on the articulating arms or tilt mechanism. Apply a small amount of silicone lubricant if necessary.
• Chybějící hardware: Refer to Section 2 for package contents. Contact Mounting Dream customer service for replacement parts.

For further assistance, please contact Mounting Dream customer service.

8. Specifikace

9. Záruka a zákaznická podpora

Mounting Dream is committed to providing high-quality products and excellent customer service.

Informace o záruce

This Mounting Dream TV wall mount is backed by a 10-letá záruka, což vám zajistí klid ohledně jeho kvality a trvanlivosti.

Zákaznická podpora

Our US-based customer service experts are available every day of the week to assist you with any questions or concerns regarding installation, operation, or product issues. Please refer to the product packaging or the official Mounting Dream webstránky pro kontaktní údaje.